• 한국컴퓨터정보학회논문지
• /
• 제27권8호
• /
• pp.123-133
• /
• 2022

본 논문에서는 NCS에서 정의된 직무를 기반으로 직무의 수준을 고려한 수준별 마이크로디그리 직무능력인증 모델을 제안한다. 4차 산업혁명 등 빠르게 변화하는 기술환경을 따라가지 못하는 대학교육의 문제로 인해 인력의 미스매치가 발생하고 있다. 이를 해결하기 위해 고안된 나노디그리와 마이크로 디그리 체계를 사이버보안 인력의 직무능력 인증에 활용한다. NCS의 세분류 분야별 직무를 마이크로 디그리, 능력단위별 세부직무를 나노디그리로 정의하고, 수준별로 구분된 능력단위의 수준을 마이크로 디그리에 동일하게 적용한다. 그리고 이를 학위기반의 대학 학력에 상응하는 직무능력을 인증하는 체계이다. 이러한 체계를 영남이공대학교 사이버보안스쿨의 교육과정에 적용하여 NCS직무 기반으로 나노디그리 과정을 구성하는 방안을 제안하였다. 본 논문에서 제안하는 방법은 최근 들어 많은 대학들이 도입하고 있는 나노디그리와 마이크로디그리의 직무역량 인증을 위한 방법으로 사용가능하다.

• 한국염색가공학회지
• /
• 제16권4호
• /
• pp.1-9
• /
• 2004

In recent, development of nano fiber has been one of the most active subjects in the world. Nano fiber is defined as a ultra fine yarn with a diameter unit of $10-100\times10^{-9}meter$, which is possible to be produced by an electro-spinning technology. In this study, physical characteristics and dyeing properties of nylon 66 nano fiber were investigated. Nylon 66 nano fiber was dyed with levelling type acid dyes. X-ray diffraction method and DSC analysis were used for the measurement of the degree of crystallization. Analysis of amino end groups was also performed in order to examine a relationship between number of amino groups and its dyeing property as well as water absorption behavior. The maximum exhaustion % of dyes and dyeing rate under various dyeing conditions, such as dyeing temperature and pH in dye bath, along with build-up properties for 2 acid dyes were evaluated. It was found that the degree of crystallization of nano fiber was smaller than that of regular fiber, and amino end groups of nano fiber were less than regular fiber. Half dyeing time of nano fiber was shorter than regular fiber because of the bigger specific surface area. Effect of pH on exhaustion % was small in case of nano fiber. Exhaustion of nano fiber increased with higher concentration of dye.

• 융복합기술연구소 논문집
• /
• 제10권1호
• /
• pp.31-36
• /
• 2020

The purpose of this study is to discuss how to introduce micro degree for innovation in convergence education in our university. To this end, the background of the introduction of micro and nano degrees and domestic and foreign applications were reviewed. The reason why the rate of students completing the multi-degree was low was that the credits required for graduation were higher than that of other domestic universities, and the difficulty of the courses offered in the convergence major did not match the students. In order to reduce the burden of students learning convergence subjects while acquiring new knowledge and skills, the introduction of a micro degree is considered to be an alternative to the current convergence education.

• 비파괴검사학회지
• /
• 제32권3호
• /
• pp.269-275
• /
• 2012

Carbon-fiber reinforced plastic(CFRP) laminates made of nano-particle-coated carbon fibers and damaged by a simulated lightning strike were tested under compression-after-impact(CAI) mode, during which the damage progress due to compressive loading has been monitored by acoustic emission(AE). The impact damage was induced not by mechanical loading but by a simulated lightning strike. Conductive nano-particles were coated directly on the fibers, from which CFRP coupons were made. The coupon were subjected to the strikes with a high voltage/current impulse of 10~40 kA within a few ${\mu}s$. The effects of nano-particle coating and the degree of damage induced by the simulated lightning strikes on AE activities were examined, and the relationship between the compressive residual strength and AE behavior has been evaluated in terms of AE event counts and the onset of AE activity with the compressive loading. The degree of impact damage was also measured in terms of damage area by using ultrasonic C-scan images. The assessment during the CAI tests of damaged CFRP showed that AE monitoring appeared to be useful to differentiate the degree of damage hence the mechanical integrity of composite structures damaged by lightning strikes.

• Composites Research
• /
• 제26권6호
• /
• pp.337-342
• /
• 2013

나노입자를 이용하여 강화 효과를 높이기 위해서는 고분자 기지 내부의 균일한 분산 상태를 확보하여야 한다. 또한 균일분산 조건 확보 후 균일 분산상태를 증명할 평가자료가 필요하다. 본 연구는 에폭시 수지와 SiC 나노입자를 혼합한 SiC/에폭시 복합 수지를 제조할 경우 커패시턴스 측정법을 이용한 강화재 분산도 예측 연구를 진행하였다. 커패시턴스는 전기용량을 의미하며 측정 재료의 내부 전하량과 비례한다. 기존 에폭시 수지에 비해 나노 SiC 입자를 함유할 경우 전하량이 증가되는 이론을 바탕으로 구간별 커패시턴스 측정에 따른 분산도 평가를 진행하고, 커패시턴스 분산도 예측방법에 대한 타당성을 FE-SEM과 물리적 강도 증가 방법으로 평가하였다. 소니케이션 분산 방법과 교반기 분산 방법을 이용하여 분산 방법에 따른 SiC 나노입자 분산도 상태를 비교하였다. 인장강도와 커패시턴스 간의 상관관계가 있었으며, 파단면에 대한 비교를 할 때 분산성 향상에 대한 차이를 확인할 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.371-374
• /
• 2007

A method for metal nano powder imprinting is proposed as a patterning process for conductive tracks that is inexpensive and scalable down to the nanoscale. Conductive tracks with line widths of $0.5{\sim}20{\mu}m$ were fabricated using this method. The processing conditions were optimized to avoid various types of defects, and to increase the degree of sintering and electric conductivity of the imprinted conductive tracks. The mean electric resistivity of the conductive tracks imprinted under optimum conditions was $8.95{\mu}{\Omega}{\cdot}cm$, which is in the range required for practical applications.

• 한국분말재료학회지
• /
• 제11권3호
• /
• pp.210-216
• /
• 2004

The possibility to decrease agglomeration of Cu nano powders and their separation during pulsed wire evaporation (PWE) process was investigated by controlling the working gas system, i.e., the design of the gas path, the type and pressure of the atmospheric gas. As a result, it was possible to choose the optimal design of the gas path providing large specific surface area and high degree of separation of the synthesized Cu nano powders. It was also shown that an Ar+10∼50$N_2$ mixture can be used in production of Cu nano powders, which do not react with nitrogen.

• Advances in materials Research
• /
• 제7권3호
• /
• pp.185-194
• /
• 2018

The mechanism of biological materials structure is very complex and has optimal properties compared to engineering materials. Top Neck mollusks shells, as an example of biological materials, have hierarchical structure, which 95 percent of its structure is Aragonite and 5 percent organic materials. This article detected mechanical properties of the Top Neck mollusks shell as a Nano composite using Nano-indentation method in different situations. Research findings indicate that mechanical properties of the Top Neck mollusks shell including elastic modulus and hardness are higher than a fresh one preserved in -50 centigrade and also a Top Neck mollusks shell preserved in environmental conditions. Nano-indentation test results are so close in range, overall, that hardness degree is 3900 to 5200 MPa and elastic modulus is 70 to 85 GPa.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.229-238
• /
• 2010

Poly($\varepsilon$-caprolactone) nano/microcapsules(nmcPCL) containing phytoncide oil were synthesized by emulsion diffusion method using ethyl acetate and poly(vinyl alcohol) (PVA) as an organic solvent and an emulsion stabilizer respectively. The influence of the degree of saponofication of the PVA and the weight ratio of core to wall materials was investigated to design nanocapsules in terms of particle size, morphology, and emulsion stability. The encapsulated nmcPCL were characterized by FT-IR spectrometry, particle size analyzer and scanning electron microscope. Mean size of nanocapsules prepared with PVA with a degree of saponofication of 87% was smaller than those of PVA with a degree of saponofication of 98.5% and the mean particle size of the capsules decreased with increasing core/shell ratio.

• 멤브레인
• /
• 제15권4호
• /
• pp.281-288
• /
• 2005

생체 적합성이 우수한 히아루론산과 생분해성이 우수한 폴리 락타이드의 이량체를 결합하여 약물 방출 시스템에 적용할 수 있는 생체 재료를 제조하고자 하였다. 냉동 건조법을 이용하여 히아루론산과 락타이드를 가교제 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDC)로 가교시켰다. 생성된 막을 핵자기 공명 분광법으로 분석하여 락타이드 반응도와 EDC 반응도를 결정하였다. 히아루론산에 대한 락타이드 몰비, 가교제 농도가 증가할수록 혹은 가교 온도가 감소할수록, 락타이드 반응도가 증가하였으며 팽윤도는 감소하였다. 서로 다른 락타이드 반응도를 가진 막으로 약물 방출 실험을 수행한 결과 락타이드 반응도가 증가하면 약물 방출 속도가 감소하는 경향을 보였다. 또 친수성이 다른 여러 가지 약물로 약물 방출 실험을 수행한 결과 친수성이 우수한 약물일수록 서서히 방출되었다.