• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.3 s.357
• /
• pp.43-51
• /
• 2007

OneNAND flash combines the advantages of NAND and NOR flash, and has become an alternative to the former. But the advanced features of OneNAND flash are not utilized effectively in demand paging systems designed for NAND flash. We propose delayed dual buffering, a demand paging system which fully exploits the random-access I/O interface and dual page buffers of OneNAND flash demand paging system. It effectively reduces the time of page transfer from the OneNAND page buffer to the main memory. On average, it achieves and 28.5% reduction in execution time and 4.4% reduction in paging system energy consumption.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.4
• /
• pp.201-207
• /
• 2012

Currently, NAND Flash memory has been widely used in consumer storage devices due to its non-volatility, stability, economical feasibility, low power usage, durability, and high density. However, a high capacity of NAND flash memory causes the high power consumption and the low performance. In the convention memory research, a hierarchical filter mechanism can archive an effective performance improvement in terms of the power consumption. In order to attain the best filter structure for NAND flash memory, we selected a direct-mapped filter, a victim filter, a fully associative filter and a 4-way set associative filter for comparison in the performance analysis. According to the results of the simulation, the fully associative filter buffer with a 128byte fetching size can obtain the bet performance compared to another filter structures, and it can reduce the energy*delay product(EDP) by about 93% compared to the conventional NAND Flash memory.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.4
• /
• pp.115-120
• /
• 2011

Recently flash memory is widely used in various mobile devices as storage medium. Nonvolatile memory can be divided into two categories: NAND- and NOR-type flash memory. NOR flash memory is mainly used to store instruction codes for operation; while NAND for data storage. However, NAND does show more economical benefits, that is, it is approximately 30~40% cheaper than NOR flash. Therefore it can be useful to improve NAND flash performance by replacing NOR flash with NAND flash combining with various buffer systems.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.537-542
• /
• 2014

The three-dimensional (3-D) NAND flash structure with fully charge storage using edge fringing field effect is presented, and its programming characteristic is evaluated. We successfully confirmed that this structure using fringing field effect provides good program characteristics showing sufficient threshold voltage ($V_T$) margin by technology computer-aided design (TCAD) simulation. From the simulation results, we expect that program speed characteristics of proposed structure have competitive compared to other 3D NAND flash structure. Moreover, it is estimated that this structural feature using edge fringing field effect gives better design scalability compared to the conventional 3D NAND flash structures by scaling of the hole size for the vertical channel. As a result, the proposed structure is one of the candidates of Terabit 3D vertical NAND flash cell with lower bit cost and design scalability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.58-61
• /
• 2010

In this paper, we research the method for HDD I/O Performance improvement by Filter Driver &NAND FLASH Memory. We analyze the effect of the operation of the Device Driver & NAND FLASH Memory and propose the method for the HDD I/O Performance improvement.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.227-229
• /
• 2014

플래시 메모리는 빠른 처리 속도, 비휘발성, 저 전력, 강한 내구성 등으로 인해 최근 스마트폰, 태블릿, 노트북, 컴퓨터와 같은 여러 분야에서 많이 사용하고 있다. 최근 기존에 사용하던 NAND 플래시가 미세화 기술의 한계에 봉착함에 따라 기존 2차원 구조의 NAND플래시를 대처할 장치로 3차원 수직구조 NAND 플래시 메모리(3D Vertical NAND)가 주목받고 있다. 기존의 플래시 메모리는 데이터를 효율적으로 삽입/삭제/검색하기 위해 B-tree와 같은 색인기법을 필요로 한다. 플래시 메모리 상에서 B-tree 구현에 관한 기존 연구로서는 BFTL(B-Tree Flash Translation Layer)기법이 최초로 제안되었다. 현재 3차원 V-NAND 구조의 플래시 메모리가 시작품으로 제작되어 머지않아 양산 될 예정이다. 본 논문에서는 향후 출시될 3차원 구조의 플래시 메모리에 적합한 Octree 기반의 파일시스템을 제안한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.4
• /
• pp.26-33
• /
• 2012

As the flash memory has increased the market share of data storage in imbedded system and occupied the most of area in a system, It has a profound impact on system reliability. Flash memory is divided NOR/NAND-type according to the cell array structure, and is classified as SLC(Single Level Cell)/MLC(Multi Level Cell) according to reference voltage. Although NAND-type flash memory is slower than NOR-type, but it has large capacity and low cost. Also, By the effect of demanding mobile market, MLC NAND-type is widely adopted for the purpose of the multimedia data storage. Accordingly, Importance of fault detection algorithm is increasing to ensure MLC NAND-type flash memory reliability. There are many researches about the testing algorithm used from traditional RAM to SLC flash memory and it detected a lot of errors. But the case of MLC flash memory, testing for fault detection, there was not much attempt. So, In this paper, Extend SLC NAND-type flash memory fault detection algorithm for testing MLC NAND-type flash memory and try to reduce these differences.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.5
• /
• pp.129-140
• /
• 2014

BIST(Built-in self test) is to detect various faults of the existing memory and BIRA(Built-in redundancy analysis) is to repair detected faults by allotting spare. Also, BISR(Built-in self repair) which integrates BIST with BIRA, can enhance the whole memory's yield. However, the previous methods were suggested for RAM and are difficult to diagnose disturbance that is NAND-type flash memory's intrinsic fault when used for the NAND-type flash memory with different characteristics from RAM's memory structure. Therefore, this paper suggests a BISD(Built-in self diagnosis) to detect disturbance occurring in the NAND-type flash memory and to diagnose the location of fault, and BISR to repair faulty blocks.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.236.2-236.2
• /
• 2014

세계 반도체 시장은 컴퓨터 기능이 더해진 모바일 기기의 수요가 증가함에 따라 메모리반도체의 시장규모가 최근 빠른 속도로 증가했다. 특히 모바일 기기에서 저장장치 역할을 하는 비휘발성 반도체인 NAND Flash Memory는 스마트폰 및 태블릿PC 등 휴대용 기기의 수요 증가, SSD (Solid State Drive)를 탑재한 PC의 수요 확대, 서버용 SSD시장의 활성화 등으로 연평균 18.9%의 성장을 보이고 있다. 이러한 경제적인 배경 속에서 NAND Flash 미세공정 기술의 마지막 단계로 여겨지는 1Xnm 공정이 개발되었다. 그러나 1Xnm Flash Memory의 생산은 새로운 제조설비 구축과 차세대 공정 기술의 적용으로 제조비용이 상승하는 단점이 있다. 이에 따라 제조공정기술을 미세화하지 않고 기존의 수평적 셀구조에서 수직적 셀구조로 설계 구조를 다양화하는 기술이 대두되고 있는데 이 중 Flash Memory의 대용량화와 수명 향상을 동시에 추구할 수 있는 3D NAND 기술이 주목을 받게 되면서 공정기술의 변화도 함께 대두되고 있다. 3D NAND 기술은 기존라인에서 전환하는데 드는 비용이 크지 않으며, 노광장비의 중요도가 축소되는 반면, 증착(Chemical Vapor Deposition) 및 식각공정(Etching)의 기술적 난이도와 스텝수가 증가한다. 이 중 V-NAND 3D 기술에서 사용하는 박막증착 공정의 경우 산화막과 질화막을 번갈아 증착하여 30layer 이상을 하나의 챔버 내에서 연속으로 증착한다. 다층막 증착 공정이 비정상적으로 진행되었을 경우, V-NAND Flash Memory를 제조하기 위한 후속공정에 영향을 미쳐 웨이퍼를 폐기해야 하는 손실을 초래할 수 있다. 본 연구에서는 V-NAND 다층막 증착공정 중에 다층막의 두께를 가상 계측하는 알고리즘을 개발하고자 하였다. 증착공정이 진행될수록 박막의 두께는 증가하여 커패시터 관점에서 변화가 생겨 RF 신호의 진폭과 위상의 변화가 생긴다는 점을 착안하여 증착 공정 중 PECVD 장비 RF matcher와 heater에서 RF 신호의 진폭과 위상을 실시간으로 측정하여 데이터를 수집하고, 박막의 두께와의 상관성을 분석하였다. 이 연구 결과를 토대로 V-NAND Flash memory 제조 품질향상 및 웨이퍼 손실 최소화를 실현하여 제조 시스템을 효율적으로 운영할 수 있는 효과를 기대할 수 있다.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.778-781
• /
• 2021

In this paper, we propose the 16-layer 3D NAND Flash memory compact modeling using SPICE. In the same structure and simulation conditions, the channel potential about Down Coupling Phenomenon(DCP) and Natural Local Self Boosting (NLSB) were simulated and analyzed with Technology Computer Aided Design(TCAD) tool Atlas(Silvaco^TM) and SPICE, respectively. As a result, it was confirmed that the channel potential of TCAD and SPICE for the two phenomena were almost same. The SPICE can be checked the device structure intuitively by using netlist. Also, its simulation time is shorter than TCAD. Therefore, using SPICE can be expected to efficient research on 3D NAND Flash memory.