• Journal of Nutrition and Health
• /
• 제12권4호
• /
• pp.25-27
• /
• 1979

The analysis of nail nitrogen content reflected recent nutritional status. Therefore, estimation of nail nitrogen content has been previously reported in a small group of neonates ana school children. Nail samples were obtained from 52 economically middle and 21 low classes. The contents of nitrogen in their fingernails were determinded by micro-Kjeldahl method. Mean nail nitrogen content was $133.1{\pm}8mg/g$ in the middle class which is significantly higher than that of the low class $122.1{\pm}8mg/g$. The nitrogen contents of nails obtained in summer were found by analysis of variance and student's t-test to he lower than those obtained in winter.

• Journal of Korean Neurosurgical Society
• /
• 제55권5호
• /
• pp.293-295
• /
• 2014

Post-traumatic cerebral infarction (PTCI) is a secondary insult which causes global cerebral hypoxia or hypoperfusion after traumatic brain injury, and carries a remarkable high mortality rate. PTCI is usually caused by blunt brain injury with gross hematoma and/or brain herniation. Herein, we present the case of a 91-year-old male who had sustained PTCI following a low-energy penetrating craniocerebral injury due to a nail without evidence of hematoma. The patient survived after a decompressive craniectomy, but permanent neurological damage occurred. This is the first case of profound PTCI following a low-energy penetrating craniocerebral nail injury and reminds clinicians of possibility this rare dreadful complication for care of head-injured patients.

• Journal of the Korean Wood Science and Technology
• /
• 제24권3호
• /
• pp.65-71
• /
• 1996

In the design of wood structures, the consideration of the dynamic load effect has been increased. Generally, damping ratio is presented as the method of considering dynamic load effect. So, the relationship between joint type and damping ratio was investigated. It has been known that the joint extremely damp the dynamic load in wood structures. Static test was performed to determine the effects of nail size and friction area on joint strength and stiffness. Joint strength and stiffness were increased with nail size. However, the static properties of joint was not affected by friction area. Cyclic test was performed to determine the effects of nail size, friction area and load magnitude on damping ratio, Damping ratio was affected by all factors. Increasing the width of the bottom plate was suggested as the most adequate method to increase the damping ratio without the reduction of the static properties of the structures.

• Structural Engineering and Mechanics
• /
• 제42권3호
• /
• pp.383-407
• /
• 2012

A numerical approach to simulate the behaviour of timber shear walls under both static and dynamic loading is proposed. Because the behaviour of timber shear walls hinges on the behaviour of the nail connections, the force-displacement behaviour of sheathing-to-framing nail connections are first determined and then used to define the hysteretic properties of finite elements representing these connections. The model nails are subsequently implemented into model walls. The model walls are verified using experimental results for both monotonic and cyclic loading. It is demonstrated that the complex hysteretic behaviour of timber shear walls can be reasonably represented using model shear walls in which nonlinear material failure is concentrated only at the sheathing-to-framing nail connections.

• International Journal of Korean Welding Society
• /
• 제3권1호
• /
• pp.17-22
• /
• 2003

During the laser welding, weldments are suddenly heated and cooled by laser beam of high density energy. This phenomenon gives an occasion to complex welding residual stresses, which have a great influence on structural instability, in laser welds. However, relevant researches on this field are not sufficient until now and residual stress measurements have experimental and practical limitations. From these reasons, a numerical simulation may be attractive in order to solve the residual stress problem. For clarifying the distribution of heat and welding residual stresses in laser welds with the nail-head shape, authors conduct the finite element analysis (two-dimensional unstationary heat conduction & thermal elastic and plastic analysis). From the results, we can confirm the stress concentration occurs at the place of melting line shape changed in laser welds with the nail-head shape.

• Geomechanics and Engineering
• /
• 제38권4호
• /
• pp.421-437
• /
• 2024

The soil nailing method entails the utilisation of nails to reinforce and stabilise a zone of soil mass. This is widely used for various applications due to its effective performance under various loading conditions. The seismic response of 6m high vertical soil-nailed cut in various site classes under dynamic excitations has been investigated in this study considering various lengths and inclinations of nails. The influence of frequency content of dynamic excitation on the response of structure has been assessed through finite element analysis using time history data of three different earthquakes. The seismic stability of the nailed cut in retaining soil in various sites under El Centro, Kobe and Trinidad earthquake ground motion is evaluated based on maximum acceleration response, maximum horizontal deformation, earth pressure distribution on the wall and maximum axial force mobilised in nails. The optimum nail inclination is identified as 15° and a minimum nail length ratio of 0.7 is essential for a stable vertical cut under dynamic excitations.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 가을 학술발표회 논문집
• /
• pp.217-224
• /
• 1998

• 대한족부족관절학회지
• /
• 제19권4호
• /
• pp.171-175
• /
• 2015

Purpose: Tibiotalocalcaneal arthrodesis has been used as a treatment option for severe deformity including Charcot arthropathy, avascular necrosis of the talus, and severe osteoarthritis of the ankle and subtalar joint. The purpose of this study was to evaluate the result of the surgical outcome of tibiotalocalcaneal arthrodesis using a retrograde intramedullary nail. Materials and Methods: Tibiotalocalcaneal arthrodesis using a retrograde intramedullary nail was performed by one surgeon in 36 cases. Clinical and radiological finding was evaluated using assessment of fusion time, 5th metatarsal-tibial angle, possibility of postoperative complication, visual analogue scale for pain and American Orthopaedic Foot and Ankle Society (AOFAS) score. Results: Union was achieved in 33 cases at an average of 23 weeks (11~29 weeks). There were 3 cases of nonunion and 1 case of reoperation. Nail-tibial angle tended to be larger in nonunion cases. AOFAS score showed significantly poor outcome at malalignment (${\geq}5^{\circ}$), negative value of 5th metatarsal-tibial angle. Conclusion: Tibiotalocalcaneal arthrodesis using a retrograde intramedullary nail is considered a useful treatment option for severe destruction and deformity involving ankle and subtalar joint.

• 유통과학연구
• /
• 제17권7호
• /
• pp.65-76
• /
• 2019

Purpose - The purpose of this study is to investigate economical ventilation effectiveness to reduce hazardous materials exposure and damage of workers by analyzing exposure amount of noxious substances under various ventilation conditions of nail salon for indoor environments. Research design, data, and methodology - This study was carried out with cooperation of Nail shop located in SeongNam city to involve an analysis of the environmental impact indoor air quality, pollutant exposure and economical cost-effectiveness in the nail workplace. The hazardous substances were PM-10(Particulate Matter-10㎛), VOCs(Volatile Organic Compounds) and Formaldehyde, which are the major materials of nail workplace. Results - PM-10 is reduced by about 60% with air cleaner, forced artificial ventilation by 32%, and natural ventilation by about 12%. TVOCs and Formaldehyde showed similar efficiency (80~100%) after natural ventilation and ventilation after 60 minutes. The removal efficiencies of VOCs and formaldehyde were similar to those of natural ventilation and mechanical ventilation system. However, in case of dust, natural ventilation was reduced by artificial ventilation system due to inflow of external dust during natural ventilation. Conclusions - If the pollution degree of outdoor air is not high, air volume is high, and natural ventilation is performed when the air conditioning and heating system is not operated. Even at the end of the work, it keeps operating for 60 minutes to remove the pollutants generated. Results of this analysis demonstrated that the worker environment can be improved by adopting institutional legislation and guidelines for ventilation.

• 터널과지하공간
• /
• 제25권3호
• /
• pp.264-274
• /
• 2015

본 연구에서는 일반적인 쏘일네일링이 야기할 수 있는 환경문제를 줄이고, 경제성과 시공성을 향상하기 위해 토목섬유망 네일의 사면 적용성을 수치해석을 통해 평가하였다. 이를 위해 일반 네일과 토목섬유망 네일의 현장 인발시험을 수행하여 각 네일의 인발특성을 분석하였다. 또한 유한차분법을 이용하여 수치모델링의 적합성을 검증하고, 네일과 지반조건에 대한 매개변수를 선정하여 사면 안정성 평가를 위한 민감도분석을 수행하였다. 추가로 실무에서 사면안정해석을 위해 널리 사용되고 있는 한계평형법을 이용한 분석을 수행하였다. 연구 결과, 직경이 동일하다면 토목섬유망 네일로 보강한 사면과 일반네일로 보강한 사면은 안정성 측면에서 큰 차이가 없었다. 따라서 일반 네일로 보강된 사면만큼의 안정성 확보가 가능하며, 경제성과 시공성이 뛰어난 토목섬유망 네일이 사면보강을 위해 효율적으로 사용될 수 있을 것으로 기대된다.