• Clean Technology
• /
• v.24 no.1
• /
• pp.41-49
• /
• 2018

Y zeolites with different extra-framework cations, such as $Na^+$, $N^+$, $Ca^{2+}$, and $Cu^{2+}$, with different charge and ionic radius have been investigated to greatly enhance a working capacity (W) of $CO_2$ adsorption at $25^{\circ}C$ and a $CO_2/CO$ selectivity factor (S). A sample of NaY with a very small amount of 0.012% $Ca^{2+}$ was fully reversible for seven times repeated $CO_2$ adsorption/desorption cycles, thereby forming no surface carbonates unlikely earlier reports. Although at pressures above 4 bar, 2.00% CaY, 1.60% CuY and 1.87% LiY all showed a $CO_2$ adsorption very similar to that measured for NaY, they gave a significant decrease in the adsorption at lower pressures, depending on the metal ion. At 0.5 ~ 2.5 bar, the extent of $CO_2$ adsorption was in the order NaY > 1.60% CuY > 2.00% CaY > 1.87% LiY. All the $Na^+-based$ metals-exchanged zeolites have a FAU (faujasite) framework and a Si/Al value near 2.6; thus, there is no discernible difference in the framework topology, framework chemical compositions, effective aperture size, and channel structure between the zeolite samples. Therefore, the distinctive behavior in the adsorption of $CO_2$ with a character as a weak Lewis acid is associated with the site basicity of the zeolites, and the interaction potentials of the cations. Different trend was shown for a CO adsorption due to weaker quadrupole interactions. Adsorption of $CO_2$ and CO on samples of CaY with 0.012 to 5.23% Ca disclosed a significant dependence on the Ca loading. The $CO_2$ adsorption increased when the cation exists up to ca. 0.05%, while it decreased at higher Ca amounts. However, values for both W and S could greatly increase as the bare zeolite is enriched by $Ca^{2+}$ ions. The 5.23% CaY had $W=2.37mmol\;g^{-1}$ and S = 4.37, and the former value was comparable to a benchmark reported in the literature.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.3
• /
• pp.251-258
• /
• 2020

Single crystal of fully dehydrated and partially Ca²⁺-exchanged zeolites A (|Ca₄Na₄|[Si₁₂Al₁₂O₄₈]-LTA) was brought into contact with Se in fine pyrex capillary at 523 K for 5 days. Crystal structure of Se-sorbed |Ca₄Na₄|[Si₁₂Al₁₂O₄₈]-LTA has been determined by single-crystal X-ray diffraction techniques at 294 K in the cubic space group $Pm{\bar{3}}m$ (a = 12.2787(13) Å). The crystal structure of yellow |Ca₄Na₄Se₄|[Si₁₂Al₁₂O₄₈]-LTA has been refined to the final error indices of R₁/wR₂ = 0.0960/0.3483 with 327 reflections for which F_o > 4s(F_o). In this structure, 4 Na⁺ and 4 Ca²⁺ ions fill every 6-ring site: These ions are all found at three crystallographic positions, on 3-fold axes equipoints of opposite 6-rings. Selenium atoms are found at three crystallographically distinct positions: 2 Se atoms per unit cell at Se(1) are located opposite 6-rings in the sodalite cavity (Se(1)-Na(1) = 2.53(5) Å) and 1 at Se(2) opposite 4-rings (Se(2)-O(1) = 2.76(10) Å) and 1 at Se(3) opposite 6-rings in the large cavity (Se(3)-Na(1) = 2.48(5) Å). Two molecular of Se₂ (Se(1)-Se(1) = 2.37(7) or 2.90(8) Å and Se(2)-Se(3) = 2.91(5) ) Å) are found in all sodalite cavity and large cavity. Other clusters such as Se₄ and Se₈ could be existed in large cavity. The inter-selenium distances turned out to be longer that of gases Se₂ molecule.

• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.449-458
• /
• 2006

The discharge of fly ash that is produced by coal-fired electric power plants is rapidly increasing in Korea. The utilization of fly ash in the raw materials would contribute to the elimination of an environmental problem and to the development of new high-performance materials. So it is needed to study the binder obtained by chemically activation of pozzolanic materials by means of a substitute for the cement. Fly ash consists of a glass phase. As it is produced from high temperature, it is a chemically stable material. Fly ash mostly consists of $SiO_2\;and\;Al_2O_3$, and it assumes the form of an oxide in the inside of fly ash. Because this reaction has not broken out by itself, it is need to supply it with additional $OH^-$ through alkali activators. Alkali activators were used for supplying it with additional $OH^-$. This paper concentrated on the strength development according to the kind of chemical activators, the curing temperature, the heat curing time. Also, according to scanning electron microscopy and X-Ray diffraction, the main reaction product in the alkali activated fly ash mortar is Zeolite of $Na_6-(AlO_2)_6-(SiO_2)_{10}-12H_2O$ type.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.5
• /
• pp.231-237
• /
• 2005

Gypsum treated to fine sandy loam increased the fornation of >2 mm aggregates in $1,550kg\;CaSO_4{\cdot}2H_2O\;10a^{-1}$ (Kbfg1) and $3,100kg\;CaSO_4{\cdot}2H_2O\;10a^{-1}$ (Kbfg2) to compare with control, Kc, at 60DAT, and bigger aggregates in general at 90DAT. The higher treatment of gypsum level, the <0.1 mm aggregates were less decreased as in Kbfg1, Kbfg2, and $6,200kg\;CaSO_4{\cdot}2H_2O\;10a^{-1}$ (Kbfg3) and aggregates of 0.25->2 mm were increased with increasing level of gypsum with more effective in Kbfg2 and Kbfg3 at 120DAT. Gypsum treated to silt loam increased aggregates of 2.0-1.0 and 1.0-0.5 mm in $3,100kg\;CaSO_4{\cdot}2H_2O\;10a^{-1}$ (Mbfg2) to compare with control (Mc), at 60DAT. Degrees of aggregation from 0.5-0.25 mm to >2 mm aggregates at 90DAT were distinctly higher. The higher treatment of gypsum level accelerated more aggregation of silt loam soil, and aggregates of 0.5-0.25 mm was most increased in Mbfg2 at 120DAT. Popped rice hulls treated to fine sandy loam increased aggregates of 2.0-1.0 mm in plots of $1,000kg\;10a^{-1}$ (Kbfhl) only to compare with control (Kc), at 60DAT, and aggregates of >2 mm and 2.0-1.0 mm Kbfh1 at 90DAT. At 120DAT, aggregation by popped rice hulls was most effective in Kbfbl pot. Popped rice hulls treated to silt loam increased in aggregates of >2 mm and 2.0-1.0 mm in $2000kg\;10a^{-1}$, Mbfb2 to compare with control, Mc, at 60DAT. Degrees of aggregation by popped rice hulls at 90DAT were higher in $1,000kg\;10a^{-1}$, Mbfh1, and Mbfh2, and at 120DAT was in $3,000kg\;10a^{-1}$, Mbfb3. Zeolite treatment with popped rice hulls, $1,500kg\;10a^{-1}$, increased in >2.0 mm aggregates in $1,000kg\;10a^{-1}$, Kbfbz1, $2,000kg\;10a^{-1}$, Kbfbz2, $3,000kg\;10a^{-1}$, Kbfhz3, and Mbfbz1, $1,000kg\;10a^{-1}$, Mbfbz2, $2,000kg\;10a^{-1}$, and $3,000kg\;10a^{-1}$, Mbthz3, to compare with control (Kc and Mc), at 60DAT. irrespective of soil texture. At 90DAT, >2.0-0.5 mm aggregates increased in Kbfhz1 of fine sandy loam. aggregates of >0.25 mm in $200kg\;10a^{-1}$ (Mbfbz1), $400kg\;10a^{-1}$ (Mbfhz2), $800kg\;10a^{-1}$ (Mbfhz3) of silt loam increased with the level of zeolite treatment. At 120DAT, the effect of zeolite treated to both soils showed the decrease of <0.1 mm aggregates. As the result, soil amendments for soil aggregation was more effective in the order of popped rice hulls+Zeolite > gypsum > popped rice hulls in fine sandy loam, and in the order of gypsum > popped rice huUs+zeolite > popped rice hulls in silt loam, respectively.

• Journal of Environmental Science International
• /
• v.12 no.7
• /
• pp.817-824
• /
• 2003

Various kinds of zeolites, such as analcime (ANA), cancrinite (CAN), Na-Pl and sodalite octahydrate (SOD) could be synthesized from Hwangto by hydrothermal reaction in a high-pressure vessel. The adsorption characteristics of Cu(II) and Cd(II) by Hwangto and its synthetic zeolites were investigated using the chemical and electrochemical surface parameters of these adsorbents. The heavy metal adsorptivity among the adsorbents decreased in the following sequences: Na-Pl > SOD > ANA > CAN > Hwangto. This sequence was the same with the values of surface site density (Ns) of these adsorbents and was correlated inversely with the values of pHpzc (pH of the point of zero charge) and the va]ues of K$\_$a2/(int) (intrinsic surface deprotonation constant) of the adsorbents for synthetic zeolites, i.e., the adsorbents with higher values of Ns and with lower values of pHpzc and K$\_$a2/(int) for synthetic zeolites showed higher heavy metal adsorptivity. With increasing pH, the heavy metal adsorptivity increased greatly between pHpzc and pH 6 or 7 because of the steep increase of negatively charged sites for synthetic zeolites, but for Hwangto, it increased broadly because of slow increase of negatively charged sites based on its lower surface sites.

• Food Science and Preservation
• /
• v.5 no.1
• /
• pp.23-28
• /
• 1998

The objective of this study was to investigate the methods of quality maintenance using modified atmosphere packaging with various quality preservatives at ambient and low temperatures. Ethylene(<1.0ppm) accumulated during modified atmosphere storage of Chinese cabbage using polyethylene film(60$\mu\textrm{m}$) caused quality deterioration such as yellowing and abscission. The addition of potassium permanganate reduced ethylene level and thus extended storage life of l00% at 20$^{\circ}C$ and 140% at 0$^{\circ}C$. To establish the storage conditions of minimally processed sit and vegetables, the experiment was conducted with various quality preservatives and packaging materials. Ceramic film(Zeolite 7%, 60$\mu\textrm{m}$) showed increasing storage life of 50%, reducing total microbial counts of 50% and keeping high appearance quality of minimally processed pears stored at 20$^{\circ}C$ and 0$^{\circ}C$. Minimally processed Chinese cabbage treated with l% CaCl2 at 20$^{\circ}C$, and 1% CaCl2 and 1% NaCl at 0$^{\circ}C$ has a longer storage life of 90% with good maketable quality. Treatment of 1% NaCl for cut Asian penis appeared increased storage life of 100%, decreased cut surface browning and the best overall acceptability by a sensory panel.

• New & Renewable Energy
• /
• v.5 no.4
• /
• pp.46-51
• /
• 2009

The purpose of this study is to investigate selective adsorption of $CO_2$ from LFG (Landfill gas) by using commercialized NaX-type zeolite adsorbent under the ambient temperature and pressure. The experiment of $CO_2$ adsorption was carried out by using simulated LFG. The $CO_2$ adsorption capacity and separation efficiency of NaX-type adsorbent were investigated by analyzing gas flow rate and gas composition at inlet and outlet of the adsorption reactor. The adsorbed $CO_2$ were desorbed under decompression condition which 0.5 Torr or by air purge. Through the result to use simulated LFG, when the method of VSA was used, 73.2~75.3 mg of $CO_2$ was adsorbed per 1 g commercial adsorbent, when the method of air purge was used, 78.4~83.2 mg of $CO_2$ was adsorbed per 1 g of commercial adsorbent.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.849-860
• /
• 1996

Natural zeolites which were known to occur in sedimentary clinoptilolite, were treated by thermal and chemical methods, and their adsorption characteristics of Cu(II) were studied. Analyses by FT-IR, S. E. M, TGA/DSC, and XRD showed that the adsorption capacity of Cu(II) on the zeolite decreased gradually at the temperatures of above $400^{\circ}C$. The zeolites, which treated with NaOH and NaCl, show higher absorbility in acid solution. The adsorption rate of Cu(II) in the presence of surfactants(LAS, POE AE) on the thermally or chemically treated zeolites varied depending on pH, anion or nonion surfactants.

• Applied Chemistry for Engineering
• /
• v.25 no.3
• /
• pp.286-291
• /
• 2014

In this study, nanosized TPA-silicalite-1 was synthesized with a suitable molar composition of TPAOH: $SiO_2$: $H_2O$ for the development of zeolite ceramic membranes to utilize as gas separation. As silica sources, TEOS, LUDOX AS-40 and CAB-O-SIL were used with the starting material of TPAOH. $NaH_2PO_4$, and a variety of acids and bases were used as promoters after TPAOH, $SiO_2$, $H_2O$ gel synthesis. To decrease synthesis time, a two step temperature change method was applied to the synthesis of TPA-silicalite-1 at a low temperature. TPA-silicalite-1 synthesized was analyzed with XRD, SEM, BET and TGA. As a result, TPA-silicalite-1 powders with a particle size of 100 nm and a specific surface area of $416m^2/g$ were obtained as optimum synthesis conditions when the two stage temperature change method was used with $NaH_2PO_4$ as promoter.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.2
• /
• pp.87-94
• /
• 2013

To investigate the effects of functional MA films (FMA) masterbatched by zeolite powder treated with 1 N HCl, 0.5 N NaCl solution and anti-fogging agent (NA) compared with control on the freshness extension of 'Fuji' apples during storage at $15^{\circ}C$. Preference, weight loss, total ascorbic acid, sugar content, acidity, change of gas composition in package were measured. After 150 days of storage, the weight loss of control (L) apples was 1%, that of apple in FMA film (NA) was 1.5% after 150 days. Total ascorbic acid content of apples in control (L) after 150 days was 2.09 mg%, those of apple in FMA film (NA) was 2.72 mg%. The titratable acidity of apple in FMA film was higher than that in control, while soluble solids content of apples in FMA film was lower than that in control after 150 days. Ethylene gas adsorbability in control was 192.2 ppm and those in FMA film was 141.4 ppm after 150 days. Overall, apples in FMA film was better than that of control. It was verified that apples packed with LLDPE film (control) lasted about 130days, while those with FMA films lasted about 170 days. Also, FMA films treated with anti-fogging agent few different compare to nontreated film, but commerdity on the display in market was considered higher than that of non-treated anti-fogging agent.