• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.150.1-150.1
• /
• 2017

구조용 합금 중 가장 우수한 비강도를 나타내는 마그네슘 및 마그네슘 합금은 최근 자동차, 항공, 기계 및 전자산업 등 다양한 산업분야에서 이용되고 있다. 하지만 마그네슘 합금은 반응성이 매우 커서 쉽게 부식되는 단점이 있다. 따라서 최근 내식성 향상을 위한 표면처리 기술에 대한 연구의 필요성이 증대되고 있으며, 그 중 플라즈마 전해산화법(Plasma electrolytic oxidation)은 양극산화반응을 이용하여 고내식성, 고경도의 산화피막을 금속 표면에 형성시키는 방법으로 많은 연구가 진행되고 있다. 본 연구에서는 탄산이온이 포함된 수용액에서 수산화나트륨의 농도가 AZ31 마그네슘 합금의 플라즈마전해산화 피막형성에 미치는 영향에 대해 알아보았다. 다양한 농도의 수산화나트륨 용액에서 DC 전류를 인가하여 플라즈마전해산화 피막을 형성하였다. 탄산 이온이 포함된 수용액에서 수산화나트륨의 농도가 높아질수록 플라즈마 전해산화 피막의 형성전압은 낮아지며, 초기 피막 형성전압 상승 속도 또한 빠르게 증가하며 피막 형성전압 등락의 폭은 감소하는 것으로 나타났다.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.110-117
• /
• 2016

In the existing research, the ammonia aqueous solution was used in order to remove the Nitrogen dioxide using the scrubber. However, ammonia is poisonous and stench is extreme. So, the system application follows the difficulty. Experiments were conducted to find a substitute material ammonia. The sodium hydroxide(NaOH), sodium thiosulfate ($Na_2S_2O_3$), and urea were used with the substitute substance. The experimental condition proceeded as the optimum conditions in the existing ammonia use. The experimental result NaOH and $Na_2S_2O_3$ was available. NaOH showed the efficiency which is the highest in 2.5%. And $Na_2S_2O_3$ showed the efficiency which is the highest in 5.0%. The efficiency was not fixed and the urea was inappropriate with the substitute substance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.88-91
• /
• 2005

본 논문에서는 비정질 As-Ge-Se-S 박막의 에칭 레이트를 측정하였으며 As-Ge-Se-S 박막에 회절격자를 형성 시킨 후 선택적 에칭을 통한 엠보싱 홀로그램을 제작하였다. NaOH 수용액으로 0.26N, 0.33N, 0.40N 농도로 변화시키며 수행하였으며 에칭 시간에 따른 에칭되는 두께의 변화를 측정하였다. 에칭 레이트는 NaOH 용액의 농도가 0.26N, 0.33N, 0.40N 일 때 각각 $2.5{\AA}/s$, $3.3{\AA}/s$, $3.9{\AA}/s$ 였다. 또한 2차원 엠보싱 회절격자를 형성 시킨후 0.26N NaOH용액으로 60초간 선택적 에칭을 수행하여 AFM(Atomic Force Microscopy) 으로 측정한 결과 선명한 엠보싱 형태의 회절격자를 확인 할 수 있었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.1
• /
• pp.15-21
• /
• 2023

To prepare zinc oxide powder, three types of sodium-based alkali precipitants such as NaOH, Na₂CO₃, NaOH/NaHCO₃ were compared to the differences in the manufacturing process of zinc oxide powder from zinc precipitate products like intermediates with the consideration of thermodynamic reaction. The prepared zinc precipitate products by the reaction with the sodium-based alkali precipitant were confirmed to respectively hydroxy zinc chloride (Zn₅(OH)₈Cl₂·H₂O) and zinc carbonate hydroxide (Zn₅(OH)₆(CO₃)₂·H₂O) from XRD analysis. Zinc oxide particles were compared in heat treatment at 800℃ according to sodium-based alkali precipitants. The mixed NaOH and NaHCO₃ of alkali precipitant reaction was contributed to synthesize the more uniform zinc oxide particles.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1192-1199
• /
• 1999

The morphology changes of cadmium hydroxide into ${\gamma}$ phase by eletrolytes were carried out to improve the high rate charge and discharge efficiency of pasted cadmium electrodes. KOH solutions with different concentrations of NaOH were used as eletrolytes. It was found that the utilization of active material of cadmium electrode was the best in an electrolyte with 1.82 M NaOH. The amount of ${\gamma}-Cd(OH)_2$ increased in proportion to the concentration of NaOH. The surface area measurement showed that an active material which contained mainly ${\gamma}-Cd(OH)_2$ had a higher specific surface area than an active material of ${\beta}-Cd(OH)_2$. In a sealed cell, the discharge capacity was improved at high rate charge and discharge (1.0 C, 2.0 C) by using an electrolyte with NaOH. Furthermore, these improved performances were maintained up to 500 cycles at 1.0 C rate charge and discharge cycles.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.90-98
• /
• 1994

For elucidation of various parameters' effects on the reactive extraction of citric acids, citric-acetic-lactic acid system with various carriers, diluents, and modifiers were investigated. Carries used were secondary amines, tertiary amines, and solvation extract. Dileunts were n-butylacetate, methoisobutylketon(MIBK), kerosine, and xylene. Modifiers were TBP and isodecanol. The effects of temperature and pH in aquous phase were studied, and equilibrium constants for the reactive extraction were obtained. The re-extraction was performed by alkali solutions such as NaOH, $Na_2CO_3$, and $K_2HPO_4$. Based on the experiment Di-isotridecylamine(secondary amine ) gave higher degree of extraction and more selective than other extractants tested for the extraction of citric acid. N-butylacetate and TBP showed heigher performance for a diluent and modifier, repetitively. The degree of extraction was getting better with decreasing the pH in the aquous phase and the temperature of extraction system. The degree of re-extraction was getting higher with decreasing basicity in the stripping phase and the system temperature, and with increasing the concentration of alkali solution.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.5
• /
• pp.175-180
• /
• 2016

ZnO nanoparticles were synthesized by aqueous preparation routes of a precipitation and a hydrothermal process. In the processes, the powders were formed by mixing aqueous solutions of Zn-nitrate hexahydrate ($Zn(NO_3)_2{\cdot}6H_2O$) with NaOH aqueous solution under controlled reaction conditions such as Zn precursor concentration, reaction pH and temperature. Single ZnO phase has been obtained under low Zn precursor concentration, high reaction pH and high temperature. The synthesized particles exhibited flakes (plates), multipods or rods morphologies and the crystallite sizes and shapes would be efficiently controllable by changing the processing parameters. The hydrothermal method showed advantageous features over the precipitation process, allowing the precipitates of single ZnO phase with higher crystallinity at relatively low temperatures below $100^{\circ}C$ under a wider pH range for the Zn precursor concentration of 0.1~1 M.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.1
• /
• pp.46-53
• /
• 2016

The structure of plasma electrolytic oxidation (PEO) coatings was investigated as a function of NaOH concentration in 0.06 M $Na_2SiO_3$ + 0.06 M $Na_3PO_4$ solution by using SEM and epoxy replica method. The PEO film was formed on AZ31 Mg alloy by the application of anodic pulse current with 0.2 ms width and its formation behavior was studied by voltage-time curves during the formation of PEO films. It was found that the addition of NaOH into $PO_4{^{3-}}$ and $SiO_3{^{2-}}$ containing aqueous solution causes a decrease in the PEO film formation voltage, suggesting that dielectric breakdown of the PEO becomes easier with increasing $OH^-$ ion concentration in the solution. With increasing $OH^-$ ion concentration, thickness of the PEO film increased and surface roughness decreased. The size of pores formed in the PEO layer became smaller and the number of cracks in the PEO layer increased with increasing $OH^-$ ion concentration. Based on the experimental results obtained in the work, it is suggested that $OH^-$ ions in the solution can contribute not only to the dielectric breakdown but also to the formation of PEO films in the presence of $PO_4{^{3-}}$ and $SiO_3{^{2-}}$ ions in the solution.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.129-135
• /
• 2013

Recently, waste water treatment system is developed in small and middle size to get more economic advantage. Freeze concentration system has high thermodynamic efficiency and low energy consumption, can re-use purified water and cold energy obtained from ice. This study was experimentally performed to investigate pollution containment in frozen layer by cooling wall temperature, air-bubble flow methods, initial ice-lining thickness of frozen layer in NaCl aqueous solution and the representative heavy metals, Pb and Cr aqueous solution. As the result, a decrease in the cooling wall temperature bring a higher growth rate of ice front and the more solute was involved in frozen layer. The method to inject directly air-bubble into ice-liquid interface through ring shape nozzle gave high purity of ice compared to indirect method. Ice lining in 5mm thickness resulted in frozen layer with higher purity than 1mm thickness.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.425-430
• /
• 1994

The effect of inhibitors and catalysts in the synthesis of 2-hydroxyethyl methacrylate(2-HEMA) was studied. As catalysts, triethylamine(TEA), $FeCl_3{\cdot}6H_2O$, $Cu(NO_3)_2{\cdot}2H_2O$, $AlCl_3$, $Na_2Cr_2O_7$were selected. p-Methoxyphenol (PMP) of aq. $NaNO_3$ solution was used as an inhibitor in polymerization. in aq. $NaNO_3$ inhibitor system, triethylamine (TEA), $FeCl_3{\cdot}6H_2O$, and $Na_2Cr_2O_7$, showed good catalytic effects. When p-methoxyphenol(PMP) was used as a polymerization inhibitor, the reaction was very sluggish and noneffective because the metal ion such as $Fe^{3+}$ or $Cr^{6+}$ was reduced by PMP. On the contrary, when aq. $NaNO_3$ was used as an inhibitor in polymerization, the reaction was very fast without deactivation of the metal catalysts.