• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.3
• /
• pp.432-438
• /
• 2017

Objective: The objective of this study was to evaluate the effect of combinations of $NaNO_2$ and NaCl concentrations on Listeria monocytogenes (L. monocytogenes) growth in emulsion-type sausage. Methods: Emulsion-type sausages formulated with different combinations of $NaNO_2$ (0 and 10 ppm) and NaCl (1.00%, 1.25%, and 1.50%) were inoculated with a five-strain L. monocytogenes mixture, and stored at $4^{\circ}C$, $10^{\circ}C$, and $15^{\circ}C$, under aerobic or vacuum conditions. L. monocytogenes cell counts were measured at appropriate intervals, and kinetic parameters such as growth rate and lag phase duration (LPD) were calculated using the modified Gompertz model. Results: Growth rates increased (0.004 to 0.079 Log colony-forming unit [CFU]/g/h) as storage temperature increased, but LPD decreased (445.11 to 8.35 h) as storage temperature and NaCl concentration increased. The effect of combinations of NaCl and low-$NaNO_2$ on L. monocytogenes growth was not observed at $4^{\circ}C$ and $10^{\circ}C$, but it was observed at $15^{\circ}C$, regardless of atmospheric conditions. Conclusion: These results indicate that low concentrations of $NaNO_2$ and NaCl in emulsion-type sausage may not be sufficient to prevent L. monocytogenes growth, regardless of whether they are vacuum-packaged and stored at low temperatures. Therefore, additional techniques are necessary for L. monocytogenes control in the product.

• Economic and Environmental Geology
• /
• v.33 no.6
• /
• pp.491-504
• /
• 2000

Environmental isotope $^{18}O$, $^{2}H$, $^{3}H$,$^{13}C$, $^{34}S$and $^{87}Sr/^{86}Sr$) studies on ${CO_2}$-rich waters in the Kangwon Province were carried out to elucidate the origin, residence time, water-rock interaction and mixing process of their. ${\delta}^{18}O$ and ${\delta}D$ data indicate that ${CO_2}$-rich waters were derived from the local meteoric water. It also shows that each type of ${CO_2}$-rich water has distinct isotopic composition and Na-${HCO_3}$ type water (-10.8 to -12.1${\textperthousand}$, ${\delta}^{18}O$ ) is lighter than other type waters. These depleted isotopic values supposedly indicate that, considering the altitude effect of isotope in Korea, the recharge area of Na-${HCO_3}$ type water can be estimated to be relatively higher in elevation than those of Ca-${HCO_3}$ and Ca-Na-${HCO_3}$ type waters. Tritium contents close to zero are observed in the Na-${HCO_3}$ type water, confirming a long residence time and the possibility of a ${CO_2}$ inflow into the aquifer at great depth. These isotope data also show that the Ca-${HCO_3}$ type water has undergone mixing process with surface water during ascending at depth, whereas Na-${HCO_3}$ type water was less mixed with surface waters. The carbon isotope data (-8.8 to ＋0.8 ${\textperthousand}$ ${\delta}^{13}C$) indicate that dissolved carbon in the ${CO_2}$-rich waters was possibly derived from deep seated ${CO_2}$ gas. The high ${\delta}^{34}S$ values (up to 38.1${\textperthousand}$) of dissolved sulfates suggest that sulfate reduction by microbial activity had occurred at depth. Strontium isotopic data ($^{87}Sr/^{86}Sr$) of ${CO_2}$-rich waters indicate that the chemistry of the ${CO_2}$-rich waters is determined by water-rock (granite) interaction.

• Journal of the Korean Ceramic Society
• /
• v.22 no.1
• /
• pp.35-39
• /
• 1985

Synthetic mica $NaMg_{2.5}(Si_4O_{10})F_2 (Na-TSM)$ was treated with HCl solution and H-type exchange resin to investigate the chemical stability and the ion exchange by measuring the dissolution of chemical components and the exchanged $H^+$ ion. The replacement of $Na^+$ ion occurred in contact with HCl solution and H-type ion exchange resin at the surface of Na-TSM particles reached $Na^+$ ions at maximum value of 70~80%. $Mg^{2+}$ ion of octahedral layer became to dissolve from the pH2 solution and th amount of it dissolved in-creased almost proportional to $H^+$ ion concentration from around 0.02N $H^+$ ion equilibrium concentration. The crystalline structure of Na-TSM was destructed by dissolution of Mg2+ ion in cncentrated hydrochloric acid solution and resulted silica gel precipitation.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.15 no.3
• /
• pp.312-320
• /
• 2008

Purpose: The purpose of this study was to verify the validity and reliability of the Type D Scale-14 (DS14). Methods: The participants were 288 patients who were diagnosed with angina pectoris, myocardial infarction, and hypertension. DS14 was developed by Denollet(2005) and consists of two domains, 7 items on negative affectivity (NA) and 7 items on social inhibition (SI). The Korean version of DS14 was developed through translation-reversed translation and a preliminary test. Data were collected using a self-report questionnaire. Cronbach $\alpha$ and Guttman split-half were used to test reliability and item analysis and factor analysis for validity. The SPSS program was used. Results: 35.8% of the participants were classified as Type D. Mean score for NA was 16.80 and for SI, 14.10 in Type D participants. For reliability of NA, Cronbach $\alpha$=0.771, and for SI, 0.707. Factor analysis on 12 items(numbers 1 & 3 were excluded as the corrected item-total correlations were below r=0.3) yielded two factors for NA (6 items) and SI (6 items). Number 7 in the NA domain was sorted into the SI domain. Conclusion: The results indicate, the cultural differences were between Europeans and Koreans. Repetition of the research is needed for generalization of DS14.

• Textile Coloration and Finishing
• /
• v.13 no.2
• /
• pp.120-127
• /
• 2001

In order to make a microfiber fabric with PET/Co-PET Sea-Island Type microfiber, the optimum condition of extraction and elimination of Co-PET from the mocrofiber was examined. At the same time, the physical property change of the fabric with respect to the change of the relative amount of the Co-PET in the microfiber was also examined to provide a directly applicable data set to the industry. The sample fabric used was warp 75/36(DTY) and weft 0.05d(PET/Co-PET, Sea Island Type Microfiber) twill fabric of 36 separated yarns＋40/24(high shrinking yarn) with 130/48 ITY. The data set was made at various NaOH concentrations and steam temperatures with time as a main variable. The physical properties examined were the tensile properties. The results obtained were the tensile. The results obtained were 1. For a proper extraction of Co-PET (13.5%)from the microfiber with wet curing, it takes more than 5 min. in 8 and 12% of NaOH solutions but it takes only 3 min. in 18% of NaOH solution at 12$0^{\circ}C$. 2. For a proper extraction of Co-PET (13.5%) from the microfiber with wet curing, ti takes 3~5min. in 12 and 14% of NaOH solution and it takes less than 3 min. in 18% of NaOH solution at $130^\circ{C}$. 3. The increasing ratio of WT increased with increasing NaOH concentrations and the equilibrium point reached was 3 min. at $120^\circ{C}$. 4. The WT increasing ratio was greater in 14 and 18% NaOH solutions than in 8 and 12% of NaOH solutions at $130^\circ{C}$5. The RT ratio changes at $120^\circ{C}$ in 8 and 12% of NaOH solutions were indifferent from that at $130^\circ{C}$ in 12% of NaOH solution. However, the RT was apparently decreased with increasing NaOH concentration.

• Textile Coloration and Finishing
• /
• v.13 no.2
• /
• pp.34-34
• /
• 2001

In order to make a microfiber fabric with PET/Co-PET Sea-Island Type microfiber, the optimum condition of extraction and elimination of Co-PET from the microfiber was examined. At the same time, the physical property change of the fabric with respect to the change of the relative amount of the Co-PET in the microfiber was also examined to provide a directly applicable data set to the industry. The sample fabric used was warp 75/36(DTY) and weft 0.05d(PET/Co-PET, Sea Island Type Microfiber) twill fabric of 36 separated yarns＋40/24(high shrinking yarn) with 130/48 ITY. The data set was made at various NaOH concentrations and steam temperatures with time as a main variable. The physical properties examined were the tensile properties. The results obtained were the tensile properties. The results obtained were 1. For a proper extraction of Co-PET (13.5%)from the microfiber with wet curing, it takes more than 5 min. in 8 and 12% of NaOH solutions but it takes only 3 min. in 18% of NaOH solution at 120℃. 2. For a proper extraction of Co-PET (13.5%) from the microfiber with wet curing, it takes 3∼5 min. in 12 and 14% of NaOH solution and it takes less than 3 min. in 18% of NaOH solution at 130℃. 3. The increasing ratio of WT increased with increasing NaOH concentrations and the equilibrium point reached was 3 min. at 120℃. 4. The WT increasing ratio was greater in 14 and 18% NaOH solutions than in 8 and 12% of NaOH solutions at 130℃. 5. The RT ratio changes at 120℃ in 8 and 12% of NaOH solutions were indifferent from that at 130℃ in 12% of NaOH solution. However, the RT was apparently decreased with increasing NaOH concentration.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.2
• /
• pp.77-90
• /
• 1997

Positive type presensitized offset plate developer were blended by quantitative analysis method. The test had been proceeeded to check variation of developability, shelf life and tone reproduction by SiO2/Na2O ratio to PS plate developer, added glycerin, and sodium phosphate with glycerin. This study of tone reproduction had been tested 5 times to get accuracy by PS platesusing kodak CCG C-3, KMS. The test result of tone reproduction of presensitized offset plates can be summarized as follows ; major compositions in positive type plate developer were Na, Si, K and P, developability were increased by Sio2/NaO2 ratio in positive type plate developer. Shelf life can be kept by add glycerin to positive type plate developer. Tone reproduction were improved by sodium phosphate due to buffer action while shelf life can be kept by add glycerin in positive type plate developer.

• Textile Coloration and Finishing
• /
• v.26 no.4
• /
• pp.331-338
• /
• 2014

In this research, split-type complex yarn of 20:80, 40:60, 50:50 nylon6/polyester composition ratio was used in order to impose unique sense on split-type complex woven. After treating both split-type complex yarn of each ratio and its produced woven in alkali solution, we got the following results by checking physical properties based on alkali proportion and treatment time. Under the condition of NaOH 20% in this experiment, it took approximately double time 20% loss of weight. The loss of weight became high when polyester proportion of N/P(nylon6/polyester) composition ratio was low, in the same fineness yarn. Even though polyester proportion was low, the loss of weight was low when the fineness was high. N/P division was well processed at about 25% loss of weight under the condition of NaOH 20%, treatment temperature $50^{\circ}C$, and treatment time 60 minutes. The research provides that the loss of weight should be processed around treatment time 24 hours in the case of NaOH concentration 15%, and treatment time 15 hours in the case of NaOH concentration 18%, respectively, in order to achieve N/P woven division ratio of about 70%-80% in industrial fields.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.703-707
• /
• 2017

배아줄기세포 유래 심근세포는 심근경색 등으로 심장이 제 기능을 다 하지 못할 때 치료적 목적으로 주사하여 환자의 심기능을 정상화 시키는 데에 쓰인다. 배아줄기세포 유래 심근세포는 페이스메이커 활동을 보이면서 막전압 고정상태에서도 주기적인 일과성 내향전류를 보이는 특징을 갖고 있다. 본 연구는 기존에 발표된 배아줄기세포 유래 심근세포의 시뮬레이션 모델을 이용하여 어떻게 하여 페이스메이커 활동이 나타나는지 그 기전을 밝히고자 하였다. 세포내 모든 이온을 고정하였을 때 모델 세포는 여전히 페이스메이커 활동을 보였다. 근장그물내 칼슘 이온을 고정하였을 때도 모델 세포는 페이스메이커 활동을 보였다. 그러나 Na-Ca 교환 전류를 차단하였을 때는 모델 세포의 페이스메이커 활동이 사라졌는데, 여기서 L-type $Ca^{2+}$ 전류의 칼슘 의존성 비활성화 기전을 제거하자 페이스메이커 활동이 지속되었다. 또한 Na-Ca 교환전류와 L-type $Ca^{2+}$ 전류만으로는 페이스메이커 활동이 보이지 않았으나 L-type $Ca^{2+}$ 전류의 크기를 3배로 증가시키자 페이스메이커 활동이 다시 나타남을 확인하였다. 따라서, 배아줄기세포 유래 심근세포의 페이스메이커 활동은 Na-Ca 교환전류와 L-type $Ca^{2+}$ 전류의 역할이 매우 중요하며, Na-Ca 교환전류는 L-type $Ca^{2+}$ 전류가 비활성화되지 않도록 칼슘 이온의 농도를 조절하는 데에 큰 역할을 하는 것으로 결론을 내렸다.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.698-702
• /
• 2017

배아줄기세포 유래 심근세포는 심근경색 등으로 심장이 제 기능을 다 하지 못할 때 치료적 목적으로 주사하여 환자의 심기능을 정상화 시키는 데에 쓰인다. 배아줄기세포 유래 심근세포는 페이스메이커 활동을 보이면서 막전압 고정상태에서도 주기적인 일과성 내향전류를 보이는 특징을 갖고 있다. 본 연구는 기존에 발표된 배아줄기세포 유래 심근세포의 시뮬레이션 모델을 이용하여 어떻게 하여 페이스메이커 활동이 나타나는지 그 기전을 밝히고자 하였다. 세포내 모든 이온을 고정하였을 때 모델 세포는 여전히 페이스메이커 활동을 보였다. 근장그물내 칼슘 이온을 고정하였을 때도 모델 세포는 페이스메이커 활동을 보였다. 그러나 Na-Ca 교환 전류를 차단하였을 때는 모델 세포의 페이스메이커 활동이 사라졌는데, 여기서 L-type $Ca^{2+}$ 전류의 칼슘 의존성 비활성화 기전을 제거하자 페이스메이커 활동이 지속되었다. 또한 Na-Ca 교환전류와 L-type $Ca^{2+}$ 전류만으로는 페이스메이커 활동이 보이지 않았으나 L-type $Ca^{2+}$ 전류의 크기를 3배로 증가시키자 페이스메이커 활동이 다시 나타남을 확인하였다. 따라서, 배아줄기세포 유래 심근세포의 페이스메이커 활동은 Na-Ca 교환전류와 L-type $Ca^{2+}$ 전류의 역할이 매우 중요하며, Na-Ca 교환전류는 L-type $Ca^{2+}$ 전류가 비활성화되지 않도록 칼슘 이온의 농도를 조절하는 데에 큰 역할을 하는 것으로 결론을 내렸다.