• Journal of Nutrition and Health
• /
• v.24 no.4
• /
• pp.344-349
• /
• 1991

This study was undertaken to evaluate the potassium consumption and excretion in forty healthy male workers of a tire company in Seoul. Mean postassium intake for three days in the subject was $54.5\pm16.7mEq/day(2.13\pm0.64g)$ and urinary excretion of potassium in 24 hours was $45.9\pm10.5mEq(1.77\pm0.41g)$. Thus 83% of dietary potassium was excreted in the form of urine. Dietary ratio of Na to K was $4.15\pm0.58$ while urinary ratio of Na to K was $5.20\pm1.11$. The main food source of potassium was cooked rice with soybean in the rice group, potato with soybean paste soup in the part of soup group. and seasoned Spanish mackerel with raddish in the side dish group. There was a strong correlation between dietary protein and dietary potassium(r=0.694, p<0.001). Urinary sodium and potassium were also strongly associated with each other(r=0.647, p<0.001).

• Journal of Environmental Science International
• /
• v.33 no.2
• /
• pp.121-129
• /
• 2024

The study investigated the effect of thermo-alkaline pretreatment on the solubilization of polyhydroxybutyrate (PHB) and its potential to enhance of thermophilic anaerobic digestion, focusing on biochemical methane potential (BMP) and methane production rate, using two different particle sizes of PHB (1500 ㎛ and 400 ㎛). Thermo-alkaline pretreatment tests were conducted at 90 ℃ for 24 hours with varying NaOH dosages from 0-80% (w/w). BMP tests with untreated PHB exhibited methane production ranging from 150.4~225.4 mL CH₄/g COD and 21.5~24.2 mL CH₄/g VSS/d, indicating higher methane production for smaller particle sizes of PHB, 400 ㎛. Thermo-alkaline pretreatment tests achieved a 95.3% PHB solubilization efficiency when 400 ㎛ PHB particles were treated with 80% NaOH dosage at 90 ℃ for 24 hours. BMP tests with pretreated PHB showed substantial improvement in thermophilic anaerobic digestion, with an increase of up to 112% in BMP and up to 168% in methane production rate. The results suggest that a combined pretreatment process, including physical (400 ㎛ PHB particles) and thermo-alkaline (90 ℃, 40-80% NaOH dosage, and 24 hours reaction time), is required for high-rate thermophilic anaerobic digestion of PHB with enhanced methane production.

• Membrane Journal
• /
• v.24 no.4
• /
• pp.285-291
• /
• 2014

The PTMSP[Poly(1-trimethylsilyl-1-propyne)]-NaY zeolite composite membranes were prepared by adding 0~50 wt% NaY zeolite to PTMSP. In order to investigate the characteristics of these membranes, we used the analytical methods such as FT-IR, $^1H$-NMR, GPC, DSC, TGA, and SEM. Gas permeation experiments were carried out at $23{\sim}26^{\circ}C$, $2kgf/cm^2$, and the permselectivity of $H_2$ and $N_2$ gases through the composite membranes was studied as a function of the NaY zeolite contents. According to TGA measurements, when NaY zeolite was inserted within the PTMSP, thermal stability of PTMSP was enhanced. Based on SEM observation, NaY zeolite was dispersed in the PTMSP-NaY zeolite composite membrane with a size of $1.5{\mu}m$. The permeability of $H_2$ and $N_2$ through the PTMSP-NaY zeolite composite membranes increased as NaY zeolite content increased. On the contrary, the selectivity($H_2/N_2$) of the PTMSP-NaY zeolite composite membranes decreased as zeolite content increased.

• Korean Journal of Community Nutrition
• /
• v.10 no.5
• /
• pp.677-692
• /
• 2005

The assessment of sodium intake is complex because of the variety and nature of dietary sodium. This study intended to develop a dish frequency questionnaire (DFQ) for estimating the habitual sodium intake and a short DFQ for screening subjects with high or low sodium intake. For DFQ112, one hundred and twelve dish items were selected based on the information of sodium content of the one serving size and consumption frequency. Frequency of consumption was determined through nine categories ranging from more than 3 times a day to almost never to indicate how often the specified amount of each food item was consumed during the past 6 months. One hundred seventy one adults (male: 78, female: 93) who visited hypertension or health examination clinic participated in the validation study. DFQ55 was developed from DFQ112 by omitting the food items not frequently consumed, selecting the dish items that showed higher sodium content per one portion size and higher consumption frequency. To develop a short DFQs for classifying subjects with low or high sodium intakes, the weighed score according to the sodium content of one protion size was given to each dish item of DFQ25 or DFQ14 and multiplied with the consumption frequency score. A sum index of all the dish items was formed and called sodium index (Na index). For validation study the DFQ112, 2-day diet record and one 24-hour urine collection were analyzed to estimate sodium intakes. The sodium intakes estimated with DFQ112 and 24-h urine analysis showed $65\%$ agreement to be classified into the same quartile and showed significant correlation (r=0.563 p<0.05). However, the actual amount of sodium intake estimated with DFQ112 (male: 6221.9mg, female: 6127.6mg) showed substantial difference with that of 24-h urine analysis (male: 4556.9mg, female: 5107.4mg). The sodium intake estimated with DFQ55 (male: 4848.5mg, female: 4884.3mg) showed small difference from that estimated with 24-h urine analysis, higher proportion to be classfied into the same quartile and higher correlation with the sodium intakes estimated with 24-h urine analysis and systolic blood pressure. It seems DFQ55 can be used as a tool for quantitative estimation of sodium intake. Na index25 or Na index14 showed $39\~50\%$ agreement to be classified into the same quartile, substantial correlations with the sodium intake estimated with DFQ55 and significant correlations with the sodium intake estimated with 24-h urine analysis. When point 119 for Na index25 was used as a criterion of low sodium intake, sensitivity, specificity and positive predictive value was $62.5\%,\;81.8\%\;and\;53.2\%$, respectively. When point 102 for Na index14 was used as a criterion of high sodium intake, sensitivity, specificity and positive predictive value were $73.8\%,\;84.0\%,\;62.0\%$, respectively. It seems the short DFQs using Na index 14 or Na index25 are simple, easy and proper instruments to classify the low or high sodium intake group.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.2
• /
• pp.316-322
• /
• 1996

The effects of Sodium Fluoride on squamous cell carcinoma cell line(SCC-cells) cultured in vitro have been studied with respect to cytotoxicity and induction of chromosome aberrations. Cytotoxicity of NaF on SCC-cells, as determined by a decrease in colony-forming ability, linearly increased with dose of NaF(150-300 ug/ml) or exposure time (3-24h). SCC-cells treated with 30-60ug/ml NaF for 24h were analyzed for chromosome aberrations. A significant increase in the frequency of chromosome aberration at the chromatid level was induced by NaF in a dose-dependent manner. These results suggest that NaF is a toxic substance which inhibit cell proliferation and causes DNA damage in SCC-cells cultured in Vitro.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.39-45
• /
• 2009

Statement of problem: Recently precalcification treatment has been studied to shorten the period of the implant. Purpose: This study was performed to evaluate the effect of precalcification treatment of $TiO_2$ Nanotube formed on Ti-6Al-4V Alloy. Material and methods: Specimens of $20{\times}10{\times}2\;mm$ in dimensions were polished sequentially from #220 to #1000 SiC paper, ultrasonically washed with acetone and distilled water for 5 min, and dried in an oven at $50^{\circ}C$ for 24 hours. The nanotubular layer was processed by electrochemical anodic oxidation in electrolytes containing 0.5 M $Na_2SO_4$ and 1.0 wt% NaF. Anodization was carried out using a regulated DC power supply (Kwangduck FA, Korea) at a potential of 20 V and current density of $30\;㎃/cm_2$ for 2 hours. Specimens were heat-treated at $600^{\circ}C$ for 2 hours to crystallize the amorphous $TiO_2$ nanotubes, and precalcified by soaking in $Na_2HPO_4$ solution for 24 hours and then in saturated $Ca(OH)_2$ solution for 5 hours. To evaluate the bioactivity of the precalcified $TiO_2$ nanotube layer, hydroxyapatite formation was investigated in a Hanks' balanced salts solution with pH 7.4 at $36.5^{\circ}C$ for 2 weeks. Results: Vertically oriented amorphous $TiO_2$ nanotubes of diameters 48.0 - 65.0 ㎚ were fabricated by anodizing treatment at 20 V for 2 hours in an 0.5 M $Na_2SO_4$ and 1.0 NaF solution. $TiO_2$ nanotubes were composed with strong anatase peak with presence of rutile peak after heat treatment at $600^{\circ}C$. The surface reactivity of $TiO_2$ nanotubes in SBF solution was enhanced by precalcification treatment in 0.5 M $Na_2HPO_4$ solution for 24 hours and then in saturated $Ca(OH)_2$ solution for 5 hours. The immersion in Hank's solution for 2 weeks showed that the intensity of $TiO_2$ rutile peak increased but the surface reactivity decreased by heat treatment at $600^{\circ}C$. Conclusion: This study shows that the precalcified treatment of $TiO_2$ Nanotube formed on Ti-6Al-4V Alloy enhances the surface reactivity.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.12
• /
• pp.1838-1840
• /
• 2003

• Product Safety
• /
• no.1 s.145
• /
• pp.24-25
• /
• 2006

• Korean Architects
• /
• no.10 s.92
• /
• pp.17-24
• /
• 1976

• The Science & Technology
• /
• v.24 no.2 s.261
• /
• pp.52-53
• /
• 1991