• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.50.1-50.1
• /
• 2011

Lead-free ceramics with a composition of 0.55 mol%$K_4CuNb_8O_23-(K_{1-x}Na_x)NbO_3$ (KCN-KNNx) where $0.45{\leq}x{\leq}0.60$ were synthesized by conventional ceramic processing. Results revealed that the addition of Na was effective in changing the microstructure and relative density of KCN-KNNx. Further, the addition of Na resulted in a slight shift of the phase transition temperatures (To-t and Tc) toward low values. A high mechanical quality factor (Qm) of 1850 was found atx=0.54, which might be due to the build-up of an internal bias field (Ei) within KCN. Thermal hysteresis in KNNx was confirmed with an increase in the Na content during the heating and cooling cycles, resulting from structural changes. Thus, KCN-KNNx with x=0.54 exhibits excellent piezoelectric properties with d33 (97 pC/N), kp (36%), and Qm (1850), being promising candidates for application in high-power piezoelectric devices.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.9
• /
• pp.701-706
• /
• 2013

We have focused on the conversion efficiency of CIGS thin film solar cell prepared by co-evaporation method as well as the optimization of process condition. The total thickness of back electrode was fixed at 1 ${\mu}m$ and the structural, electric and optical properties of CIGS thin film were investigated by varying the thickness of Mo:Na bottom layer from 0 to 500 nm. From the experimental results, the content of Na was appeared as 0.28 atomic percent when the thickness of Mo:Na layer was 300 nm with compactly densified plate-shape surface morphology. From the XRD measurements, (112) plane was the strongest preferential orientation together with secondary (220) and (204) planes affecting to the crystallization. The lowest roughness and resistivity were 2.67 nm and 3.9 ${\Omega}{\cdot}cm$, respectively. In addition, very high carrier density and hole mobility were recorded. From the optimization of Mo:Na layer, we have achieved the conversion efficiency of 9.59 percent.

• Korean Journal of Materials Research
• /
• v.24 no.3
• /
• pp.123-128
• /
• 2014

To realize high-performance thin film solar cells, we prepared CIGS by the co-evaporation technique on both sodalime and Corning glass substrates. The structural and efficient properties were investigated by varying the thickness of the Mo:Na layer, where the total thickness of the back contact was fixed at 1${\mu}m$. As a result, when the Mo:Na thickness was 300 nm on soda-lime glass, the measured Na content was 0.28 %, the surface morphology was a plate-like compact structure, and the crystallinity by XRD showed a strong peak of (112) preferential orientation together with relatively intense (220) and (204) peaks as the secondary phases influenced crystal formation. In addition, the substrates on soda-lime glass effected the lowest surface roughness of 2.76 nm and the highest carrier density and short circuit current. Through the optimization of the Mo:Na layer, a solar conversion efficiency of 11.34% was achieved. When using the Corning glass, a rather low conversion efficiency of 9.59% was obtained. To determine the effects of the concentration of sodium and in order to develop a highefficiency solar cells, a very small amount of sodium was added to the soda lime glass substrate.

• Journal of the Korean Ceramic Society
• /
• v.28 no.8
• /
• pp.626-634
• /
• 1991

The specimens for the corrosion test were made by hot-pressing of SiC power with 2 wt% Nl2O3 and 10wt% Al2O3 additions at 200$0^{\circ}C$ and 205$0^{\circ}C$. The specimens were corroded in 37 mole% NaCl and 63 mole% Na2SO4 salt mixture at 100$0^{\circ}C$ up to 60 min. SiO2 layer was formed on SiC and then this oxide layer was dissolved by Na2O ion in the salt mixture. The rate of corrosion of the specimen containing 10 wt% Al2O3 was slower than that of the specimen containing 2 wt% Al2O3. This is due to the presence of continuous grain boundary phase in the specimen containing 10 wt% Al2O3. The oxidation of SiC produced gas bubbles at the SiC-SiO2 interface. The rate of corrosion follows a linear rate law up to 50 min. and then was accelerated. This acceleration is due to the disruption oxide layer by the gas evolution at SiC-SiO2 interface. Pitting corrosion has found at open pores and grain boundaries.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.4
• /
• pp.425-428
• /
• 1992

Sodium substituted samples of $Y_{1-x}Na_xBa_2Cu_3O_{7-y}$ for $0.00{\leq}x{\leq}0.16$ were prepared and characterized by X-ray powder pattern, electrical resistivity and magnetic susceptibility measurements, Raman spectroscopy, and idometric titration. The Na substituted compounds have narrow solid solution limits where $0.00{\leq}x{\leq}0.16.$ As the Na concentration increases, the parent orthorhombic structure tends to gradually change to tetragonal. Small changes in the superconducting transition temperature, Tc, are observed in this solid solution region. Raman spectra for the Na phases are virtually identical with that of $YBa_2Cu_3O_7$ except that the Cu(1)-O(4) stretching mode at 504 $cm^{-1}$ and the Cu(2)-O(2,3) bending mode at 340 $cm^{-1}$ for x = 0.16 are slightly shifted. The hole concentrations of the sodium substituted compounds ranged from 0.31 to 0.33 per Cu site are increased with Na content. The substitution of $Na^+$ for $Y^{3+}$ site appears to create oxygen vacancies in the Cu-O chains, causes structural change from orthorhombic to tetragonal, and increases hole concentration in the substituted system.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.848-856
• /
• 2018

The aim of this study was to investigate the hematology and serum chemistry values on Sprague-Dawley rats, used krill (Euphausia superba) meal diet and sodium fluoride (NaF) for 5 weeks. Seven-week-old male rats were divided into five groups and fed experimental diets containing three krill meal contents, administrated orally 10 mg of NaF, basal diet group (BG), basal diet plus 10 mg of NaF group (BFG), 10.0% krill meal plus 10 mg of NaF group (KMF10), 20.0% krill meal plus 10 mg of NaF group (KMF20), and 30.0% krill meal plus 10 mg of NaF group (KMF30). Concentrations of non-esterified fatty acid (NEFA), blood urea nitrogen (BUN), creatinine in sera were significantly lower in the KMF10, KMF20, KMF30 than BFG (p<0.05). In uric acid concentration KMF10 showed no significant difference with the BFG group, was significantly lower than KMF20 and KMF30 (p<0.05). Total calcium (T-Ca) concentrations was all observed to be no significant difference, was increased with krill meal content (p<0.05). Phosphorus (Pi) concentration was no change in the content of krill meal. Accordingly, krill meal was considered to be effective in improving NEFA and BUN, creatinine, uric acid concentration.

• Korean Journal of Food Science and Technology
• /
• v.38 no.2
• /
• pp.222-231
• /
• 2006

Deoxynivalenol (DON)-contaminated barley was treated with 0.1 M $Na_2CO_3$ solution to reduce DON content. DON content of barley was reduced from 2.08 to 0.67 ppm. Bread was made with 10, 20, and 30% DON-reduced barley flour added to white wheat flour. Farinogram showed water absorption and arrival time increased, while stability and mechanical tolerance index decreased when DON-reduced barley flour was added to white wheat flour. Gelatinization temperature, temperature at maximum viscosity, and maximum viscosity increased in amylogram with increasing addition of DON-reduced barley flour. Loaf volume of bread decreased with increasing amount of DON-reduced barley flour, while loaf weight increased. Barley flour pH increased by treatment with$Na_2CO_3$, and pH reduction decreased fermentation rate of yeast. Volume and size of gluten matrix decreased and crumb hardened in bread made with DON-reduced barley flour. Acceptabilities for color and texture were low in bread made with DON-reduced barley flour. Addition of DON-reduced barley flour at 30% reduced overall acceptability, whereas no significant difference in overall acceptability was observed when DON-reduced barley flour was added at 10 and 20%.

• Development and Reproduction
• /
• v.24 no.3
• /
• pp.215-224
• /
• 2020

Seawater adaptability of steelhead trout increases along with the increase in the size of the fish, independent of parr-smolt transformation. Three 96 h seawater challenge tests were conducted to determine the size at which seawater adaptability of steelhead trout develops. Plasma Na⁺ and Cl^- levels, moisture content, gill Na⁺/K⁺ ATPase activity, and mortality during the 96 h after direct transfer to seawater (32 ppt) were determined. Plasma Na⁺ and Cl^- levels in 50 g fish continuously increased during the 96 h after the transfer to seawater (p<0.05), but the levels in 100 and 150 g fish leveled off after 24 h (p<0.05). Both 100 and 150 g size steelhead trout maintained muscle moisture content (%) better than 50 g size fish (p<0.05). Gill Na⁺/K⁺ ATPase activity in the 100 g size group increased in a time-dependent manner after transfer to seawater (p<0.05), whereas activity in the 50 and 150 g sizes did not increase (p>0.05), for which a possible explanation was discussed. A mere 2.6% mortality in both the 50 and 150 g size groups was observed. In conclusion, the current results indicate that 50 g size steelhead trout did not show development of a high level of hypoosmoregulatory capacity, whereas fish in the 100 and 150 g size groups showed a high level in our experimental conditions. Therefore, the steelhead trout larger than a 100 g size is recommended for transfer to seawater culture.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.251-251
• /
• 2007

A new type of a lead-free positive temperature coefficient of resistivity(PTCR) material. based on $(Bi_{1/2}Na_{1/2})TiO_3\;-\;BaTiO_3$ solid solution ceramics has been developed. The effect of $Nb_O_5$ and $Y_2O_3$ content on the electrical properties and the microstructure of (1-x) $(Bi_{1/2}Na_{1/2})TiO_3\;-\;x\;BaTiO_3$ (BNBT) ceramics made using a conventional mixed oxide process has been studied. The Curie Temperature was obviously increased with the increasing of $(B_{0.5}Na_{0.5})TiO_3$ content. The Y-doped BNBT ceramics(x=0.02) display low resistivity values of $10^2-10^3$ ohm*cm at room temperature and the Curie Temperature of $Tc=155^{\circ}C$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.E2
• /
• pp.78-88
• /
• 2006

In order to study the characteristics of cloud, a real-scale experiment for cloud generation was carried out using an extinct vertical mine (430 m height) located in the northeastern Honshu, Japan. The dry particles generated from the three-step concentrations of NaCl solutions were used for cloud generation. The number size distributions of initial dry particles and cloud droplets were monitored by Scanning Mobility Particle Sizer (SMPS) and Forward Scattering Spectrometer Probe (FSSP) at bottom and upper sites of pit, respectively. The polymeric water absorbent film (PWAF) method was employed to measure liquid water content ($W_L$) as a function of droplet size. Moreover the chemical properties of individual droplet replicas were determined by micro-PIXE. The CCN number concentration shows the lognormal form in dependence of the particle size, while the number size distributions of droplets are bimodal showing the peaks around $9{\mu}m$ and $20{\mu}m$ for every case. In comparison to background mineral particles, right shifting of size distribution line for NaCl particles was occurred. When NaCl solutions with three-step different concentrations were neulized, $W_L$ shows the strong droplet size dependence. It varied from $10.0mg\;m^{-3}$ up to $13.6mg\;m^{-3}$ with average $11.6mg\;m^{-3}$. A good relationship between $W_L$ and cloud droplet number concentration was obtained. Both chemical inhomogeneities (mixed components with mineral and C1) and homogeneities (only mineral components or C1) in individual droplet replicas were obviously observed from micro-PIXE elemental images.