• The Journal of Korean Obstetrics and Gynecology
• /
• v.28 no.2
• /
• pp.193-203
• /
• 2015

Objectives : The purpose of this study is to evaluate the clinical effects of ascending kidney water and descending heart fire pharmacopuncture treatment for hot flush and sweating. Methods : Ascending kidney water and descending heart fire pharmacopuncture is achieved by injecting pharmacopuncture on a specific acupoint to change from the state of water-fire disharmony to harmonious state. Hwangryunhaedok-tang (黃連解毒湯) pharmacopuncture is injected on both side Gyeonjeong (GB ₂₁ ), Pungji (GB ₂₀ ). Total 0.4 cc was injected by 0.1 cc each point. BUM (Bear’s gall bladder, ox bezoar and musk) pharmacopuncture is injected on both side Jeonjung (CV ₁₇ ), Jungwan (CV ₁₂ ), Gihae (CV ₆ ). Total 0.15 cc was injected by 0.05 cc each point. Treatment was done daily. The method of evaluation are Hot Flush Score (HFS), VAS and sweating areas. Results : In case 1, after treatment hot flush score was reduced from 24 to 4 points. VAS scale was reduced from 7 to 2. It took about two weeks for the symptoms to decrease by half. Associated symptoms almost did not stay at discharge. In case 2, after treatment hot flush score was reduced from 28 to 2 points. VAS scale was reduced from 10 to 3. And emotional symptoms were reduced about 70%. In case 3, after treatment hot flush score was reduced from 8 to 1 points. VAS scale was reduced from 6 to 1. And headache and chest discomfort symptoms have disappeared. Conclusions : Ascending kidney water and descending heart fire pharmacopuncture treatment is effective for improve ascending kidney water and descending heart fire energy. Therefore, it will be used to alleviate hot flush and sweating.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.3
• /
• pp.31-41
• /
• 2024

Food waste compost with high salt content produced by aerobic digestion, but concerns about application of cropland. To address this issue, food waste is being composted by mixing it with livestock manure, which has a lower salt content. Therefore, this study aimed to evaluate the growth characteristics of red pepper and soil chemical properties for continuous application with different amounts of food waste compost with manure (FWC). Treatments were consisted of no fertilizer (NF), inorganic fertilizer (N-N-P₂O₅-K₂O, 19.0-11.2-14.9 kg 10a^-1), and inorganic fertilizer + food waste compost with manure (NPKFWC). FWC treatment was applied at three treatment rates based on soil organic matter content: 900 kg 10a^-1, 1,800 kg 10a^-1, and 2,700 kg 10a^-1 ( referred to a s FWC 1, 2, 3 , respectively). As a r esult of the red pepper yield was about 1.8 times higher in NPKFWC 1 and NPKFWC 2 than that in the NF, but decreased in the NPKFWC 3, 300% of the recommended FWC application rate. Yield decreased in all FWC treatments with continuous application for three year and also decreased about 40% from 3,265 kg 10a^-1 in the first year to 1,948 kg 10a^-1 in the third year. For the soil chemical properties, the content of soil organic matter, available P₂O₅, and exchangeable cations increased in the FWC treatments, and were higher than the NF. Exchangeable sodium in all treatments was increased slightly compared to the soil before used, and no significant salinization was observed in the FWC. This study confirmed that excessive use of FWC not only reduced nutrient use efficiency, but also decreased the red pepper yield. Therefore, it is concluded that optimum usage of FWC is effective for agroecological impacts.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.30-37
• /
• 2009

Early enamel caries is commonly remineralized by the patient‘s improved oral hygiene or fluoridation, however the result is clinically unreliable. As an alternative, we tried to seal the lesions with low-viscosity light-curing resin. The aim of the present study was to search the proper methods of the adequate pretreatment prior to applying adhesive resin on natural proximal caries lesions. Thirty nine extracted deciduous molar teeth showing proximal early caries lesion were used for this study. They were divided into 5 groups : Group 1; only carefully cleaned with water, group 2; etched with 15% HCl for 15s, group 3; etched with 35% phosphoric acid for 15s, group 4; etched with 35% phosphoric acid for 30s, and group 5; cleaned with 0.5% NaOCl. Following results were obtained by evaluating with SEM and CLSM after applied with adhesive resin. 1. As a result of SEM evaluation, group 2 showed clearly removed surface layer, group 3,4 showed partially removed surface layer irregularly, group 5 showed slightly removed surface layer. 2. Group 2 showed the deepest infiltration depth, followed by group 4, group 3, group 5, group 1 and besides group 5, other groups showed significantly deep infiltration depth. (p < 0.01) In conclusion, the best methods of the adequate pretreatment on natural proximal caries lesion for deep infiltration of adhesive resin was to etch with 15% HCl for 15s.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.133-140
• /
• 2005

Purpose : This test is designed to identify the validity of treatment plan by implementing real-time dosimetry by means of dose that is absorbed into PTV and OAR when preparing doses of 3D and POP plans. Materials and Methods : In treatment. error can be calculated be comparing Exp. Dose with the actual dose, which has been converted from 'the reading value obtained by placing diode detector on the area to be measured'. Same test can be repeated using Alderson-Rando phantom. Results : Errors were found: A patient(POP plan): 197.6/199=-1.2%, B patient(3D-plan): 199.9/198.7=+0.6%, C patient: 196/200=-1.5%. In addition, considering the resulted value of measuring OAR besides target-dose for C patient showed 96/200, representing does of 47%, the purpose of protection was judged to be duly accomplished. Also it was acknowledged the resulted value of -3.7% met the targeted dose within the range of ${\pm}5%$. Conclusion : Aimed for identifying the usefulness of pre-treatment dose measurement using diode detector, this test was useful to evaluate the validity of curing because it resulted in the identification of category to be protected as well as t dose. Moreover, it is thought to have great advantage in ascertaining the dose of target, dose of which is not calculated yet. Similar to L-gram before treatment, this test is thought to be very effective so that it can bring great advantages in the aspects such as validity of curing method and post-treatment plan as well.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.2
• /
• pp.115-123
• /
• 2013

Stoker type incinerator is one of the most popular one used as municipal solid waste (MSW) incineration because, in general, it is quite suitable for large capacity and need no preprocessing facility. Nowadays, however, since the combustible portion of incoming MSW increases together with the decrease of the moisture content due to prohibition of directly burying food waste in landfill, the heating value of waste is remarkably increasing in comparison with the early stage of incinerator installation. Consequently, the increased heating value in incinerator operation causes a number of serious problems such as reduction of waste amount to be burned due to the boiler heat capacity together with the significant NO generation in high temperature environment. Therefore, in this study, a series of numerical simulation have been made as parameters of waste amount and the fraction of moisture in air stream in order to investigate optimal operating condition for the resolution of the problems associated with the high heating value of waste mentioned above. In specific, a detailed turbulent reaction flow field calculation with NO model was made for the full scale incinerator of D city. To this end, the injection method of moisturized air as oxidizer was intensively reviewed by the addition of moisture water amount from 10% and 20%. The calculation result, in general, showed that the reduction of maximum flame temperature appears consistently due to the combined effects of the increased specific heat of combustion air and vaporization heat by the addition of water moisture. As a consequence, the generation of NOx concentration was substantially reduced. Further, for the case of 20% moisture amount stream, the afterburner region is quite appropriate in temperature range for the operation of SNCR. This suggests the SNCR facility can be considered for reoperation. which is not in service at all due to the increased heating value of MSW.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.3
• /
• pp.348-356
• /
• 2007

Statistical and probabilistic method was used in the analysis of data, which is the most effective one in describing the various natures, and the methodology relating the results with the design was developed. Influents and effluents of three treatment plants were analyzed and the focus was made on BOD, COD, SS, IN, TP The fluctuations of influent such as BOD, COD, SS were extremely large and their standard deviations(st.dev) were more than 10 mg/L. but those of TN, TP were small; the st.dev was 6.6 mg/L for TN, 0.6 mg/L for TP, respectively. But, effluent concentration showed consistent pattern regardless of the influent fluctuations, the st.dev was ranged between 0.28 and 4.48 mg/L. Effluent distributional characteristics were as follows; BOD, COD were distributed normally, but SS, TN, and TP, log-normally; unsymmetric and skewed to the right. The coefficient of reliability(COR) based on the results of statistics of data was introduced to evaluate the process performance an4 to reflect the process performance to the process design. The coefficient of reliability relates the design value(the goal) with the standards and it can be used in operating treatment facilities under a certain reliability level and/or in evaluating the reliability of the treatment facilities on operation. Each treated water quality of effluent showed the half of water quality standards in the level of 50% percentile and all treatment plant was achieved 100% probability of water quality standards. It was concluded that the variability of the process performance should be reflected to the design procedure and the standards through the analysis based on the statistics and the probability.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.3
• /
• pp.321-329
• /
• 2008

Amorphous silica nanoparticles are among the most fundamental $SiO_2$ compounds, having implications in diverse geological processes and technological applications. Here, we explore structural details of amorphous silica nanoparticles with varying particle sizes (7 and 14 nm) using $^{29}Si$ and $^{1}H$ MAS NMR spectroscopy together with quantum chemical calculations to have better prospect for their size-dependent atomic structures. $^{29}Si$ MAS NMR spectra at 9.4 T resolve $Q^2,\;Q^3$ and $Q^4$ species at -93 ppm, -101 ppm, -110 ppm, respectively. The fractions of $Q^2,\;Q^3,\;O^4$ species are $7{\pm}1%,\;27{\pm}2%$, and $66{\pm}2%$ for 7 nm amorphous silica nanoparticles and $6{\pm}1%,\;21{\pm}2%$, and $73{\pm}2%$ for 14 nm amorphous silica nanoparticles. Whereas it has been suggested that $Q^2$ and $Q^3$ species exist on particles surfaces, the difference in $Q^{2}\;+\;Q^{3}$ fraction in both 7 and 14 nm particles is not significant, suggesting that $Q^2$ and $Q^3$ species could exist inside particles. $^{1}H$ MAS NMR spectra at 11.7 T shows diverse hydrogen environments, including physisorbed water, hydrogen bonded silanol, and non-hydrogen bonded silanol with varying hydrogen bond strength. The hydrogen contents in the 7nm silica nanoparticles (including water and hydroxyl groups) are about 3 times of that of 14 nm particles. The larger chemical shills for proton environments in the former suggest stronger hydrogen bond strength. The fractions of non-hydrogen bonded silanols in the 14 nm amorphous silica nanoparticles are larger than those in 7 nm amorphous silica nanoparticles. This observation suggests closer proximity among hydrogen atoms in the nanoparticles with smaller diameter. The current results with high-resolution solid-state NMR reveal previously unknown structural details in amorphous silica nanoparticles with particle size.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.4
• /
• pp.227-235
• /
• 2020

This study was conducted to investigate the growth characteristics of the shoot and roots and to analyse the morphological characteristics of roots of waterlogging resistant and susceptible maize inbred lines. Six maize inbred lines were treated with waterlogging for 10 days at V3, and the degree of leaf senescence was evaluated for waterlogging resistance. As a result of waterlogging resistance evaluation, KS85 was the most damaged inbred line with 3.33 senescence leaves and 5.54 degree, and KS141 was the least damaged inbred line with 1.33 senescence leaves and 3 degree. At 20 days after treatment, the effect of waterlogging stress on the shoot dry matter accumulation of KS85 and KS141 were decreased by 86.1% and 77.0%, respectively, compared to the control. Similarly, root dry matter accumulation of KS85 and KS141 were decreased by 77.6% and 65.0%. As a result of SEM photographs of the nodal roots of the two maize inbred lines, the thickness of cortex of KS141 was thicker than that of KS85, and the distortion of the cortex was observed in KS85 at 20 days after waterlogging. It was concluded that the thickness of cortex was related to maize waterlogging resistance.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.1
• /
• pp.63-73
• /
• 2022

The aim of this study was to cluster according to the bone age of elementary school students in order to analyze the physique, physical fitness, and skeletal maturation of each cluter group and to provide basic data for the balanced development of elementary school students through data analysis. The subjects of this study were 2243 students aged 8 to 13 years, and the skeletal maturation were calculated by applying them to the TW3 method score conversion table after the X-ray films were taken. A total of 2 components in physique were measured using a stadiometer(Hanebio, Korea, 2021) and the Inbody 270(Biospace, Korea, 2019), and a total of 7 components in physical fitness, which included muscular strength(Hand Grip Strength), balance(Bass Stick Test), agility(Plate Tapping), power(Standing Long Jump), flexibility(Sit&Reach), muscular endurance(Sit-Up), and cardiovascular endurance(Shuttle Run) were measured as well. K-Means clustering method, cross-tabulation analysis, and one-way variable analysis(ANOVA) were conducted for data processing using the SPSS PC/Program(Version 26.0) and Bristics Studio Tool, and it was considered significant at the level of p< .05. The results of this study may be summarized as follow. First, as a result of clustering using three components of skeletal maturation: retarded, normal, and advanced, cluster 1(Retarded) showed excellence in muscular strength, balance, and agility. cluster 2(Normal) showed poor flexibility, whereas cluster 3(Advanced) showed excellence in muscular strength. Second, as a result of analyzing the differences in physique according to the clustering of elementary school students by their individual characteristics, cluster 3(Advanced) showed excellence in height, weight, and body fat percentage. Third, as a result of analyzing the differences in physical fitness according to the clustering of elementary school students by their individual characteristics, cluster 3(Advanced) showed excellence in Hand Grip Strength(Left, Right), whereas cluster 1(Retarded) showed excellence in Bass Stick Test, and cluster 3(Advanced) showed excellence in Standing Long Jump.

• Science of Emotion and Sensibility
• /
• v.13 no.2
• /
• pp.359-370
• /
• 2010

The purpose of this study is to test the performance of the recommended summer dressing for office man through the analysis of skin temperature changes by air-conditioning temperature. We tested two clothing combinations; formal wear with necktie and casual shirts without necktie as for Cool mapsi. 4 male subjects sat to stabilize for thirty minutes after entering artificial-climate chamber with both temperature of $25^{\circ}C$, $27^{\circ}C$ and $50{\pm}10%$ R.H. And during 60 minute experiments of simulating office work, the subjective feelings including thermal, humidity and comfort sensation, skin temperature, clothing humidity and sweat amount were measured at the equal intervals. The result is that formal wear of $25^{\circ}C$ and Cool mapsi of $27^{\circ}C$ show good values such as low skin temperature, low clothing humidity and neutral thermal sensation. And Cool mapsi of $25^{\circ}C$ shows the risk of low rectal temperature for long and static energy level of office work. Formal wear of $27^{\circ}C$ shows high values of mean skin temperature, clothing humidity and thermal sensation. Second experiment was to find the ambient temperature when the subject wearing formal wear shows the skin temperature corresponding to which he shows on Cool mapsi of $27^{\circ}C$. The air-conditioning temperature on wearing formal wear has to be $2^{\circ}C$ lower to produce the corresponding skin temperature to which shows on wearing Cool mapsi of $27^{\circ}C$. Therefore it is possible to increase room temperature to $27^{\circ}C$, when wear Cool mapsi for summer office, for skin temperature and thermal sensation are produced the same.