• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.399-399
• /
• 2013

Metal silicides는 Si 기반의microelectronic devices의 interconnect와 contact 물질 등에 사용하기 위하여 그 형성 mechanism과 전기적 특성에 대한 연구가 많이 이루어지고 있다. 이 중 Rare-earth(RE) silicides는 저온에서 silicides를 형성하고, n-type Si과 낮은 Schottky Barrier contact (~0.3 eV)을 이룬다. 또한 낮은 resistivity와 Si과의 작은 lattice mismatch, 그리고 epitaxial growth의 가능성, 높은 thermal stability 등의 장점을 갖고 있다. RE silicides 중 ytterbium silicide는 가장 낮은 electric work function을 갖고 있어 n-channel schottky barrier MOSFETs의 source/drain으로 주목받고 있다. 또한 Silicon 기반의 CMOSFETs의 성능 향상 한계로 인하여 germanium 기반의 소자에 대한 연구가 이루어져 왔다. Ge 기반 FETs 제작을 위해서는 낮은 source/drain series/contact resistances의 contact을 형성해야 한다. 본 연구에서는 저접촉 저항 contact material로서 ytterbium germanide의 가능성에 대해 고찰하고자 하였다. HRTEM과 EDS를 이용하여 ytterbium germanide의 미세구조 분석과 면저항 및 Schottky Barrier Heights 등의 전기적 특성 분석을 진행하였다. Low doped n-type Ge (100) wafer를 1%의 hydrofluoric (HF) acid solution에 세정하여 native oxide layer를 제거하고, 고진공에서 RF sputtering 법을 이용하여 ytterbium 30 nm를 먼저 증착하고, 그 위에 ytterbium의 oxidation을 방지하기 위한 capping layer로 100 nm 두께의 TiN을 증착하였다. 증착 후, rapid thermal anneal (RTA)을 이용하여 N2 분위기에서 $300{\sim}700^{\circ}C$에서 각각 1분간 열처리하여 ytterbium germanides를 형성하였다. Ytterbium germanide의 미세구조 분석은 transmission electron microscopy (JEM-2100F)을 이용하였다. 면 저항 측정을 위해 sulfuric acid와 hydrogen peroxide solution (H2SO4:H2O2=6:1)에서 strip을 진행하여 TiN과 unreacted Yb을 제거하였고, 4-point probe를 통하여 측정하였다. Yb germanides의 면저항은 열처리 온도 증가에 따라 감소하다 증가하는 경향을 보이고, $400{\sim}500^{\circ}C$에서 가장 작은 면저항을 나타내었다. HRTEM 분석 결과, deposition 과정에서 Yb과 Si의 intermixing이 일어나 amorphous layer가 존재하였고, 열처리 온도가 증가하면서 diffusion이 더 활발히 일어나 amorphous layer의 두께가 증가하였다. $350^{\circ}C$ 열처리 샘플에서 germanide/Ge interface에서 epitaxial 구조의 crystalline Yb germanide가 형성되었고, EDS 측정 및 diffraction pattern을 통하여 안정상인 YbGe2-X phase임을 확인하였다. 이러한 epitaxial growth는 면저항의 감소를 가져왔으며, 열처리 온도가 증가하면서 epitaxial layer가 증가하다가 고온에서 polycrystalline 구조의 Yb germanide가 형성되어 면저항의 증가를 가져왔다. Schottky Barrier Heights 측정 결과 또한 면저항 경향과 동일하게 열처리 증가에 따라 감소하다가 고온에서 다시 증가하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.816-825
• /
• 2018

Recently, it was emerged to need the necessity of LPG residues management due to the finding some substances such as rust. This study is performed to investigate the characteristics of LPG residues in the production and distribution stage of LPG. For the qualitative analysis of LPG residues, it was operated to be set up the analysis conditions(the flow rate, etc) of GC-MS and was performed to analyze the component of LPG residues. From the analysis result using GC-MS, it was shown that the component of LPG residues was turned out the plasticizer to be used in the rubber manufacturing process. The inorganic components of LPG residues were analyzed using ICP-OES. At the results of inorganic analysis, it was shown that the Si element was detected, which was presumably derived from defoamers used mainly in the LPG production. Also, the P and Zn element, which are estimated to be components of grease additives used for filling facilities, were also partially detected. No trace of rusting was detected in the LPG residues in the production and distribution stages analyzed in this study. But, as plasticizers and grease additives can affect to the LPG fuel system in vehicles, it will be necessary to use the proper quality of rubber and to expand the use of low boiling grease additives.

• Microbiology and Biotechnology Letters
• /
• v.4 no.3
• /
• pp.91-97
• /
• 1976

During the course of studies on the production and utilization of thermostable ${\alpha}$-amylase from a thormophilic actinomycete species isolated from soil, partial characterization of the ${\alpha}$-amylase has been (arried out. The optimum pH for the dextrinogenic activity of the enzyme was found to be 6.5 and the maximum reaction rate was achieved at a temperature range of 55$^{\circ}$ to 65$^{\circ}C$. Calcium ion was recognized to have a slight effect in activating the enzyme, while heavy metal salts especially ferrous and cupric ions showed a remarkable inhibition effect. The enzyme was best protected iron thermal denaturation at pH 8.0 with tris-HCI buffer；inactivation was rapid at higher or lower pH values. Furthermore, its thermal stability was greatly increased by calcium ion, particulary at the final concentration of 1${\times}$10$\^$－2/ mole in the reaction mixture. The Km value for the ${\alpha}$-amylase was calculated to be 2.17${\times}$10$\^$－4/g per $m\ell$ and the energy of activation for the dextrinogenic reaction to be 12,000${\pm}$580 ㎈ per mole.

• Microbiology and Biotechnology Letters
• /
• v.30 no.2
• /
• pp.142-150
• /
• 2002

Streptomyces polychromogenes IFO 13072 was used as a strain producing cholesterol oxidase(EC 1.1.3.6). The conditions of cholesterol oxidase production were investigated. The optimum composition of medium for production of the enzyme was 1% dextrin, 0.5% casamino acid, 0.1% $KH_2$PO$_4$, 0.5% $NaNO_3$ and 0.05% $MgSO_4$(pH 7.3). The enzyme was purified specifically by cholesterol affinity column chromatography with a yield of 23.2%. The purified enzyme showed a single polypeptide on SDS-PAGE and the molecular weight was estimated about 52,000 daltons. The optimum pH and temperature of the cholesterol oxidase were pH 7.0 and $37^{\circ}C$, respectively. The enzyme was stable in the range of pH 6.0~7.0 and $25^{\circ}C$. The cholesterol oxidase activity was strongly inhibited by metal ions such as $Hg^{2＋}$ and $Fe^{2＋}$ and inhibitors such as dithiothreitol, mercaptoethanol and isonicotinic acid. The Michaelis constant(Km) for the cholesterol was found to be 25 mM by Lineweaver-Burk plot analysis.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.689-693
• /
• 1993

${\alpha}-galactosidase$ releases galactoside from raffinose and stachyose which are the major sugars in soybean, Although raffinose and stachyose were known as flatulence factors, these sugars were recently claimed as bifidus factors. In this experiment we studied the properties of ${\alpha}-galactosidase$ and its production from Bifidobacterium sp. Int-57. Int-57 produced higher level of ${\alpha}-galactosidase$ than other intestinal bacteria. The production of ${\alpha}-galactosidase$ was greater when grown on raffinose compared with other carbohydrates tested. Partially purified ${\alpha}-galactosidase$ was obtained after sonication of harvested cell pellet followed by DEAE-cellulose chromatography and Sepharose CL-6B gel filtration, and assayed using PNP-${\alpha}-galactosidase$ as a substrate. Optimum pH for activity was 7.0 and optimum temperature was $40^{\circ}C$. At 5 mM concentration of metal ions, $CoCl_{2}\;and\;CuCl_{2}$ and inhibited the enzyme activity by 33% and 21% respectively. The enzyme was shown to hydrolyse genuine substrates, i.e. raffinose and stachyose.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1422-1426
• /
• 2008

The purpose of this study was to test characteristics between normal and autistic children via comparison of nutrient intakes, hair mineral, blood free radical, and serotonin contents. A total of 50 children aged 3-9 were divided into two main groups of normal control children (n=22) and autistic children (n=28) tested by child psychiatrist. The nutrient intakes by 24-hour recall method were no significantly different between the two groups. The concentrations of toxic mineral, such as cadmium (Cd) and lead (Pb) in hair of autistic children were significantly higher, while concentration of antioxidant mineral (Cu, Zn, Fe) was lower than that of normal children. The autistic children had significantly higher concentrations of blood free radical than that of normal children. No significant difference was observed in serotonin concentration between the two groups. Our results suggest a possible role of increased toxic mineral and free radical, both of which may be relevant to the pathophysiology of autism in children with developmental delay.

• Journal of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.366-370
• /
• 1989

A new macrocyclic ligand 1,15,18-triaza-3,4;12,13-dibenzo-5,8,11-cycloeicosane (NdienOdien$H_4$ = $N_3O_3$) has been synthesized and identified by element analysis, NMR and IR spectrophotometry. Stepwise protonation constants of ligand are determined by potentiometry in 95% methanol solution(I = 0.1 mol $dm^{-3}$, $Me_4$NCl). log $K_1$;log $K_2$;log $K_3$ = 9.1;8.1;3.6.The kinetics of the acid-promoted dissociation reactions of complex cations of nickel(II) and copper(III) with NdienOdien and NdienOen macrocyclic ligands having, respectively, 17 and 20 ring members, have been studied spectrophotometrically in HCl$O_4$ NaCl$O_4$ aqueous solutions. From the temperature effect on kinetic constant ($k_{obs}$), the parameters of activation(${\Delta}H^{\neq}$, ${\Delta}S^{\neq}$) of dissociation reaction for $ML^{2+}$ with $H^+$ ion have been determined. We have proposed the possible mechanism of the reaction from the data obtained.

• Journal of Korean Library and Information Science Society
• /
• v.41 no.4
• /
• pp.211-240
• /
• 2010

Gwang-Kuk Wonjong Gongsin-Nokgwon(光國原從功臣錄券) is a book which recorded the titles of position and the names of retainers who corrected the Chosun dynasty's genealogy. This study aims to research into existing 4 books of Gwang-Kuk Wonjong Gongsin-Nokgwon, which were to analyze the reasons of grant, structure and forms, the characteristics of meritorious retainers' official positions and social status. As the result, Gwang-Kuk Wonjong Gongsin-Nokgwon is the metal typologic book which was made up Jaeju-Gapin(再鑄甲寅) letter type. The structure of the Gwang-Kuk Wonjong Gongsin-Nokgwon was composed of the beginning(卷首) the body(本文) the end(卷末). Gwang-Kuk Wonjong meritorious retainers formed the total of 872 persons(1st grade: 137 persons, 2nd grade: 136 persons, 3rd grade: 599 persons) with 354 official titles. Also an analysis of their social status confirmed that 872 persons were "Yang-ban(兩班)" which constituted the largest group(748 persons : 85.8%), "Jung-in(中人)" were second group(103 persons : 11.8%), "Yang-in(良人)" were 13 persons(1.5%) and "Chun-in(賤人)" were 8 persons(0.9%).

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.77-77
• /
• 2017

Titanium and its alloys offer attractive properties in a variety of applications. These are widely used for the field of biomedical implants because of its good biocompatibility and high corrosion resistance. Titanium anodizing is often used in the metal finishing of products, especially those can be used in the medical devices with dense oxide surface. Based on SAE/AMS (Society of Automotive Engineers/Aerospace Material Specification) 2488D, it has the specification for industrial titanium anodizing that have three different types of titanium anodization as following: Type I is used as a coating for elevated temperature forming; Type II is used as an anti-galling coating without additional lubrication or as a pre-treatment for improving adherence of film lubricants; Type III is used as a treatment to produce a spectrum of surface colours on titanium. In this study, we have focused on Type II anodization for the medical (dental and orthopedic) application, the anodized surface was modified with gray color under alkaline electrolyte. The surface characteristics were analyzed with Focused Ion Beam (FIB), Scanning Electron Microscopy (SEM), surface roughness, Vickers hardness, three point bending test, biocompatibility, and corrosion (potentiodynamic) test. The Ti-6Al-4V alloy was used for specimen, the anodizing procedure was conducted in alkaline solution (NaOH based, pH>13). Applied voltage was range between 20 V to 40 V until the ampere to be zero. As results, the surface characteristics of anodic oxide layer were analyzed with SEM, the dissecting layer was fabricated with FIB method prior to analyze surface. The surface roughness was measured by arithmetic mean deviation of the roughness profile (Ra). The Vickers hardness was obtained with Vickers hardness tester, indentation was repeated for 5 times on each sample, and the three point bending property was verified by yield load values. In order to determine the corrosion resistance for the corrosion rate, the potentiodynamic test was performed for each specimen. The biological safety assessment was analyzed by cytotoxic and pyrogen test. Through FIB feature of anodic surfaces, the thickness of oxide layer was 1.1 um. The surface roughness, Vickers hardness, bending yield, and corrosion resistance of the anodized specimen were shown higher value than those of non-treated specimen. Also we could verify that there was no significant issues from cytotoxicity and pyrogen test.

• Journal of environmental and Sanitary engineering
• /
• v.23 no.1
• /
• pp.33-48
• /
• 2008

The purpose of this study was to characterize background mass concentration of $PM_{10},\;PM_{2.5}$ and metallic composition from June 2004 to June 2005 in comparison with Seoul and Asan city. The results were as follows: 1. Annual mean of $PM_{10}$ concentrations in Seoul and Asan were $56.95({\pm}25.63){\mu}g/m^3,\;57.02({\pm}27.22){\mu}g/m^3$ respectly. 2. Annual mean of $PM_{2.5}$ concentrations in Seoul and Asan were $46.97({\pm}40.36){\mu}g/m^3,\;42.16({\pm}21.79){\mu}g/m^3$ respectly. 3. The average $PM_{2.5}/PM_{10}$ ratio was 0.82 in Seoul and 0.74 in Asan city. 4. The concentration of $PM_{10},\;PM_{2.5}$ were the highest in spring and the lowest in summer. Asan was higher than Seoul in spring and summer. 5. The results showed that average $PM_{10}$ composition order as Si>Fe>Pb>Zn>Mn in Seoul and Si>Fe>Zn>Pb>Mn in Asan. The concentration of metals in $PM_{10}$ of Seoul that Cr, Cu, Fe, Mn were high in spring and Zn was low in Fall. Fe, Mn were high in spring of Asan. 6. The results showed that average $PM_{2.5}$ composition order as Si>Pb>Fe>Zn>Mn in Seoul and Si>Fe>Pb>Zn>Cr in Asan. The concentration of metals in $PM_{2.5}$ of Seoul that Cr was high in spring. 7. The result showed that relation between Cr and Cu, Cu and Fe, Fe and Mn, Mn and Zn, Zn and Si in Seoul, Cr and Zn, Cu and Pb, Zn and Pb, Pb and Mn in Asan. The result showed that $PM_{10}$ concentration exceeding $50{\mu}g/m^3$(US-EPA Standard) and $PM_{2.5}$ concentration exceeding $15{\mu}g/m^3$(US-EPA Standard). In urban area, the monitoring of $PM_{2.5}$ permits the anthropogenic sources and the interference of natural sources with respect to $PM_{10}$ measurements.