• 제목/요약/키워드: Na Metal

검색결과 1,289건 처리시간 0.034초

자동차용휘발유의 산화열화특성 규명 연구 (Study on the Characterization of Oxidative Degradation of Automotive Gasoline)

  • 민경일;임의순;정충섭;김재곤;나병기
    • Korean Chemical Engineering Research
    • /
    • 제51권2호
    • /
    • pp.250-256
    • /
    • 2013
  • 휘발유는 온도 및 햇빛 노출 등의 저장환경에 따라 산화에 의해 유기산 및 중축합 고분자 물질(검질)이 생성되어 금속재료의 부식과 고무수지 등의 열화 및 연료공급 시스템의 축적물로 남아 차량 문제를 유발시킬 수 있다. 최근에 LPG와 휘발유 겸용 차량에서 장기간 사용하지 않은 휘발유가 차량문제를 유발하거나, 옥탄가가 비이상적으로 낮은 연료들이 출현하고 있지만 명확한 원인규명이 되지 않은 상황이다. 이에, 휘발유의 산화에 대한 명확한 규명을 통해 저장환경, 품질변화 추정 등 관리방안을 제시하고자 하였다. 휘발유의 산화특성 규명을 위해 현재 유통되고 있는 자동차용 휘발유와 향후 보급가능 바이오에탄올 혼합연료(바이오에탄올 10%)에 대해 저장용기(차량 연료탱크, 폴리에틸렌(PE) 재질 및 철재 용기) 별, 저장환경(햇빛 노출(옥상), 햇빛 비노출(창고)), 대기 중 공기노출 등에 대한 산화열화 영향을 산화가 일어나기 쉬운 여름철(6월~10월)에 18주간 저장평가하여 실제 품질기준 항목에 미치는 영향을 분석하였다. 폴리에틸렌(PE) 재질 용기의 경우 마개 틈 또는 표면으로의 고옥탄가 저비점 성분의 증발로 옥탄가의 품질기준이 벗어나는 경우가 있었다. 특히 햇빛 노출의 상태에서는 휘발유 산화와 저비점 성분의 증발로 옥탄가 및 증기압이 급격히 감소하였고, 검(gum)질도 과량 생성되었다. 바이오에탄올 혼합연료도 유사한 결과를 나타내었다.

계면활성제 첨가에 의한 산화아연의 수열합성과 광촉매 특성 (Effect of Surfactants on ZnO Synthesis by Hydrothermal Method and Photocatalytic Properties)

  • 현혜현;이동규
    • 한국응용과학기술학회지
    • /
    • 제34권1호
    • /
    • pp.50-57
    • /
    • 2017
  • 금속산화물 반도체 중 하나인 산화아연은 인체에 무해하고 친환경적이며, 우수한 화학적, 열적 안정성의 특성을 지니며 3.37 eV의 넓은 밴드갭 에너지와 60 meV의 높은 엑시톤 바인딩 에너지로 인해 태양전지, 염료페기물의 분해, 가스센서 등 다양한 분야에 응용이 가능한 물질이다. 산화아연은 입자 형상 및 결정성의 변화에 따라 광촉매 활성이 변하게 된다. 따라서, 다양한 실험변수와 첨가제를 사용하여 입자를 합성하는 것이 매우 중요하다. 본 논문에서는 마이크로파 수열합성법을 사용하여 산화아연을 합성하였다. 전구체로는 질산아연을 사용하였고, 수산화나트륨을 사용하여 용액의 pH를 11로 조정하였다. 첨가제로는 계면활성제인 에탄올아민, 세틸트리메틸암모늄브로마이드, 소듐도데실설페이트, 솔비탄모노올레이트를 첨가하였다. 합성된 입자는 별모양, 원추형, 씨드형태, 박막형태의 구형의 형상을 보였다. 합성된 산화아연의 물리 화학적 특성은 XRD, SEM, TGA을 통하여 확인하였고, 광학적 특성은 UV-vis spectroscopy, PL spectroscopy, Raman spectroscopy으로 확인하였다.

Luminescence properties of InGaN/GaN green light-emitting diodes grown by using graded short-period superlattice structures

  • Cho, Il-Wook;Na, Hyeon Ji;Ryu, Mee-Yi;Kim, Jin Soo
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.279.2-279.2
    • /
    • 2016
  • InGaN/GaN multiple quantum wells (MQWs) have been attracted much attention as light-emitting diodes (LEDs) in the visible and UV regions. Particularly, quantum efficiency of green LEDs is decreased dramatically as approaching to the green wavelength (~500 nm). This low efficiency has been explained by quantum confined Stark effect (QCSE) induced by piezoelectric field caused from a large lattice mismatch between InGaN and GaN. To improve the quantum efficiency of green LED, several ways including epitaxial lateral overgrowth that reduces differences of lattice constant between GaN and sapphire substrates, and non-polar method that uses non- or semi-polar substrates to reduce QCSE were proposed. In this study, graded short-period InGaN/GaN superlattice (GSL) was grown below the 5-period InGaN/GaN MQWs. InGaN/GaN MQWs were grown on the patterned sapphire substrates by vertical-metal-organic chemical-vapor deposition system. Five-period InGaN/GaN MQWs without GSL structure (C-LED) were also grown to compare with an InGaN/GaN GSL sample. The luminescence properties of green InGaN/GaN LEDs have been investigated by using photoluminescence (PL) and time-resolved PL (TRPL) measurements. The PL intensities of the GSL sample measured at 10 and 300 K increase about 1.2 and 2 times, respectively, compared to those of the C-LED sample. Furthermore, the PL decay of the GSL sample measured at 10 and 300 K becomes faster and slower than that of the C-LED sample, respectively. By inserting the GSL structures, the difference of lattice constant between GaN and sapphire substrates is reduced, resulting that the overlap between electron and hole wave functions is increased due to the reduced piezoelectric field and the reduction in dislocation density. As a results, the GSL sample exhibits the increased PL intensity and faster PL decay compared with those for the C-LED sample. These PL and TRPL results indicate that the green emission of InGaN/GaN LEDs can be improved by inserting the GSL structures.

  • PDF

토양(土壤)에서 분리(分離)한 Streptomyces sp. s-45의 효소학적(酵素學的) 성질(性質)에 관한 연구(硏究) (Studies on the Enzymatical Properties of Streptomyces sp. S-45 Isolated from Soil)

  • 김영일;김용웅;김광식
    • 한국토양비료학회지
    • /
    • 제21권2호
    • /
    • pp.129-134
    • /
    • 1988
  • 토양(土壤)으로부터 분리(分離)한 Streptomyces sp. S-45 균주(菌株)의 효소학적(酵素學的) 성질(性質)을 검토(檢討)한 결과(結果)는 다음과 같다. 1. 분리균(分離菌) Streptomyces sp. S-45의 Chitinase activity는 $3.01({\mu}/m{\ell})$이고 ${\beta}$-1.3-Glucanase activity는 $2.49({\mu}/m{\ell})$이었다. 2. 탄소원(炭素原)으로서 Colloidal chitin 0.7%, Glucose 0.3%, 질소원(窒素原)으로서 Asparagine 0.5%, Peptone 0.2% 존재(存在)가 효소생산(酵素生産)에 효과적(效果的)이었다. 3. 최적(最適) 효소생성(酵素生成) 조건(條件)으로 pH 7.0, $30^{\circ}C$에서 6일간(日間) 진탕배양시(培養時) 최고(最高)의 효소생성(酵素生成)을 나타내었다. 4. 효소(酵素)의 활성(活性)에 미치는 최적(最適) 작용조건(作用條件)은 pH 6.5~7.0, 온도(溫度)는 $45{\sim}50^{\circ}C$였다. 5. 본(本) 효소(酵素)는 pH6.0~7.0에서 안정성(安定性)이 가장 높았고, $80^{\circ}C$로 10분(分) 처리시(處理時) Chitinase는 10%, ${\beta}$-1.3-Glucanase는 12%로 잔존활성(殘存活性)이 감소(減少)하였다. 6. 금속(金屬)이온에 대한 효소(酵素)의 영향(影響)은 $Co^{{+}{+}}$, $Cu^{{+}{+}}$, $Mn^{{+}{+}}$, $Al^{{+}{+}{+}}$$10^{-2}M$$Sn^{{+}{+}}\;10^{-3}M$에서 활성(活性)이 증대(增大)하였고, $Ag^{{+}{+}}$, $Hg^{{+}{+}}$는 현저(顯著)한 저해작용을 하였다.

  • PDF

Elk종의 녹용과 부산물의 이화학적 특성에 관한 연구 (A Study on Physico-chemical Property and Composition of Velvet Antler and Byproducts in Elk.)

  • 이길왕
    • 생명과학회지
    • /
    • 제14권3호
    • /
    • pp.496-500
    • /
    • 2004
  • 녹용 및 녹혈, 녹미, 녹신, 녹건 등의 유리 아미노산 함량을 보면 녹용에서는 glutamic acid, lysine, taurine, 녹혈에는 histidine, glycine, lysine, 녹미에는 glutamic acid, lysine, alanine, 녹신에는 histidine, glutamic acid, taurine, 녹건에는 taurine, alanine, histidine등이 많이 함유되었다 무기물의 함량을 보면 녹용은 $K^{+}$, $Ca^{2+}$, $P^{+}$가 각각 888.4, l1533.1, 147.2 (mg/100g)였고 F $e^{3+}$ , $K^{+}$, $P^{+}$가 각각 344.1, 1023.6, 157.2 (mg/100g). 녹미에는 $K^{+}$, $Mg^{2+}$, $P^{+}$가 각각 1420.6, 118.4, 1105.2 (mg/100g), 녹신에는 $K^{+}$, $Ca^{2+}$, $P^{+}$ 이 각각 294.4, 330.5, 514.3 (mg/100g)였으며 녹건에는 $K^{+}$, $Ca^{2+}$, $P^{+}$가 각각 444.84, 166.61, 242.87 (mg/100g)이였다. 유리 양이온 함량을 보면 $Na^{+}$$K^{+}$는 사슴의 혈액에서 가장 많았고 $Mg^{2+}$는 꼬리에서 그리고 $Ca^{+}$은 녹용에서 가장 많았으며 비교적 다른 부산물 보다 혈액에서 양이온 함량이 많았다.

대전지역 상수도 물의 계절변화에 따른 물리화학적 불균질 (Physicochemical Heterogeneity of the Supply Water Quality depending on Seasonal Changes in the Taejon Area, Korea)

  • 이현구;이찬희;서호택
    • 자원환경지질
    • /
    • 제33권6호
    • /
    • pp.505-517
    • /
    • 2000
  • This study was undertaken to provide a drinking water quality on the basis of physicochemical properties. In this study, the 25 samples of supply waters of the Taejon area were sampled twice (February and August in 1999). Hydrochemistry of the supply water belongs to the $Ca^{2+}$-${HCO_3}^{-1}$ type, whereas the supply water was characterized by the relatively significant enrichment of ${Ca}^{2+}$, ${Na}^{2+}$, ${K}^{2+}$, ${Cl}^{2+}$ ions and heavy metals compared to the original water from the Daecheong lake. Generally, the supply water has a mean values for $10.7^{\circ}C$ of temperature, 6.86 of pH, -12 mV of Eh, 88 ${\mu}S$/cm of EC and 70.379 mg/l of TDS in February, whereas the waters of the same sites in August are a slightly high temperature ($26.1^{\circ}C$), TDS (78.069 mg/l) and extremely high EC (442 ${\mu}S$/cm) value. These values are similar with physicochemical properties of the original lake water depending on the seasonal differences. Results of speciation calculation indicate that potentially toxic ions might exist mainly in the forms of free metal (${Cu}^{2+}$ or ${Zn}^{2+}$) and a small amount of ${CO_3}^{2-}$and ${OH}^{-}$in the supply water. The water seemed to be in equilibrium with kaolinite field of the normal stability diagrams for the natural water. Based on enrichment parameter of the supply water normalized by original lake water composition, the average value of those parameter can be calculated with nearly 1.00, but the those values for Cu+Zn possible source of decrepit pipe lines are 126.75 in February and 115.63 in August samples. The parameter values varied with sampling sites, however, do not exceed by chemistry of drinking water standard. Solid compounds remained on the membrane filter papers after filtration are adhered to pale yellow or yellowish brown colored dissolved solids and precipitates, which are coated by 0.02 to 0.35 mm thick per 500 ml with colloidal particles of about 1 to 2${\mu}m$ size. The particles are mainly Fe-Cu-Zn compounds and partly detected to Mn and Pb.

  • PDF

국내 사업장 폐기물 중 유기오염물질의 배출특성 연구 - 금속과 플라스틱 제조공정 및 폐수처리시설 중심으로 - (Characteristics of organic pollutants in discharged industrial waste in Korea - Focuse on metallic and plastic manufacturing processes and wastewater treatment plants -)

  • 연진모;강영렬;김우일;신선경;정성경;조윤아;김나;김민선
    • 분석과학
    • /
    • 제25권6호
    • /
    • pp.421-428
    • /
    • 2012
  • 본 연구는 국내에서 배출되는 금속과 플라스틱 및 폐수처리시설 폐기물 중 유기오염물질류인 PCDD/PCDFs, PAHs, PCBs의 배출 특성을 파악하고자 수행하였다. PCDD/PCDFs의 농도는 비산재가 7.37~432.20 ng-TEQ/kg, 소각재는 0.51~855.01 ng-TEQ/kg, 분진의 0.37~385.81 ng-TEQ/kg 범위로 나타났으며 외국의 분석결과에 비해 다이옥신의 함량농도가 낮은 것으로 조사되었다. PAHs의 농도는 공정오니의 평균 함량농도가 0.0075~2.9225 mg/kg, 폐수처리오니는 0.0035~1.6716 mg/kg 범위로 나타나 해양환경관리법의 규제기준을 모두 만족하였으며, 공정오니 및 폐수슬러지의 PAHs 농도는 외국의 경우와 비교하여 다소 낮은 것으로 조사되었다. 또한, 해양환경보전법에서 관리하고 있는 PCBs 7 종을 분석한 결과(제 1기준 0.15 mg/kg 비교) 검출농도는 0.0~0.65 mg/kg으로 나타났으며, 일부 기계유 및 작동유에서 PCB-52, PCB-101, PCB-138, PCB-153 및 PCB-180 개별이성체가 초과되었다.

놀이터 바닥재로부터 용출되는 중금속 노출 특성 (Characteristics of heavy metals's exposure from playground flooring)

  • 조윤아;김우일;신선경;강영렬;김민선;정성경;연진모;김나;이지영
    • 분석과학
    • /
    • 제25권6호
    • /
    • pp.416-420
    • /
    • 2012
  • 재활용 제품의 사용이 증가함에 따라 이에 대한 위해성 평가가 필요한 실정이다. 본 연구에서는 재활용 제품 중 재활용 고무분말을 이용한 놀이터용 바닥재와 해당 고무분말의 중금속 함량을 비교하였다. 또한 각각의 물질이 경피로 전이되는 양을 확인하여 피부에 흡수되는 중금속 노출 특성을 살펴보았다. 아연의 경우 함량이 높은데 반해 전이량이 0.1 $mg/cm^2$으로 매우 낮았는데 이는 아연은 표면 접촉으로는 잘 묻어나지 않는다는 것을 나타낸다. 그러나 철과 알루미늄의 경우, 함량이 바닥재에서 12 배 높게 나타났고, 전이량이 아연보다 약 5 배 높게 나타났다. 이것은 철과 알루미늄이 바닥재에 사용된 안료에서 기인했다는 것을 말한다. 놀이터 6 개소를 대상으로 피부 흡수에 의한 중금속 노출량을 산정한 결과, Ba의 경우 타 중금속에 비하여 비교적 높게 산정되었다. Zn의 함량이 높음에도 불구하고 Ba의 노출량이 더 높은 것은 Ba의 피부흡수율이 Zn에 비해 약 5 배 높기 때문인 것으로 판단된다.

배리어방전을 이용한 메탄전환반응에서 함산소 가스가 전환율 및 생성물변화에 미치는 영향 (The Conversion of Methane with Oxygenated Gases using Atmospheric Dielectric Barrier Discharge)

  • 이광식;여영구;최재욱;이화웅;송형근;나병기
    • 에너지공학
    • /
    • 제15권1호
    • /
    • pp.52-59
    • /
    • 2006
  • 본 연구에서는 배리어 방전을 이용한 메탄전환 반응에서 수소 및 다른 탄화수소류 화합물의 생성율과 분포에 관하여 알아보았다. 반응기의 외부전극과 내부전극은 SUS로 만들어진 원통형을 사용하였으며, 배리어 방전을 일으키기 위해서 전극 사이에 알루미나 튜브를 사용하였다. 전환된 메탄으로부터 다양한 생성물을 얻기 위해서 유입가스의 조성, 유량변화, 주파수 및 전압을 변화시켜 주면서 실험하였다. 플라즈마 반응에 의한 주요한 생성물들은 에틸렌, 에탄, 프로판, 부탄, 수소, 일산화탄소, 그리고 이산화탄소 등으로 나타났다. 비활성 가스의 사용과 인가전압의 증가에 의해서 메탄 전환율 및 탄화수소류의 선택도가 향상되었다. 유입가스 내에 수증기의 첨가로 인해서 메탄의 전환율 및 수소의 수율이 증가되었다. 수증기 첨가 반응에서 에탄, 프로판 그리고 부탄은 더 높은 전압을 인가하였을 때 수율이 증가하였으며, 아세틸렌과 에틸렌은 보다 낮은 전압에서 수율이 증가함을 알 수 있었다.

PEMFCB금속분리판 코팅 기술 개발 : I. 표면 및 부식 특성 평가 (Development of Surface Coating Technology fey Metallic Bipolar Plate in PEMFC : I. Study on Surface and Corrosion Properties)

  • 정경우;김세융;양유창;안승균;전유택;나상묵
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2006년도 추계학술대회
    • /
    • pp.348-351
    • /
    • 2006
  • Bipolar plate, which forms about 50% of the stack cost, is an important core part with polymer electrolyte membrane in PEMFC. Bipolar plates have been commonly fabricated from graphite meterial having high electrical conductivity and corrosion resistance. Lately, many researchers have concentrated their efforts on the development of metallic bipolar plate and stainless steel has been considered as a potential material for metallic bipolar plate because of its high strength, chemical stability, low gas permeability and applicability to mass production. However, it has been reported that its inadequate corrosion behavior under PEMFC environment lead to a deterioration of membrane by dissolved metal ions and an increase in contact resistance by the growth of passive film therefore, its corrosion resistance as well as contact resistance must be improved for bipolar plate application. In this work, several types of coating were applied to 316L and their electrical conductivity and corrosion resistance were evaluated In the simulated PEMFC environment. Application of coating gave rise to low interfacial contact resistances below $19m{\Omega}cm^2$ under the compress force of $150N/cm^2$. It also made the corrosion potential to shift in the posit ive direct ion by 0.3V or above and decreased the corrosion current from ca. $9{\mu}A/cm^2$ to ca. $0.5{\mu}A/cm^2$ in the mixed solution of $0.1N\;N_2SO_4$ and 2ppm HF A coat ing layer under potentiostatic control of 0.6V and $0.75V_{SCE}$ for 500 hours or longer showed some instabilities, however, no significant change in coat Ing layer were observed from Impedance data. In addition, the corrosion current maintained less than $1{\mu}A/cm^2$ for most of time for potentiostatic tests. It indicates that high electrical conductivity and corrosion resistance can be obtained by application of coatings in the present work.

  • PDF