• 제목/요약/키워드: N_4

검색결과 39,247건 처리시간 0.057초

SOME RESULTS ON CENTRALIZERS OF SEMIPRIME RINGS

  • ANSARI, ABU ZAID
    • Journal of Applied and Pure Mathematics
    • /
    • 제4권3_4호
    • /
    • pp.99-105
    • /
    • 2022
  • The objective of this research paper is to prove that an additive mapping T from a semiprime ring R to itself will be centralizer having a suitable torsion restriction on R if it satisfy any one of the following algebraic equations (a) 2T(xnynxn) = T(xn)ynxn + xnynT(xn) (b) 3T(xnynxn) = T(xn)ynxn+xnT(yn)xn+xnynT(xn) for every x, y ∈ R. Further, few extensions of these results are also presented in the framework of *-ring.

침지식 여과조를 이용한 합성 폐수의 탈질화 (Denitrification of Synthetic Wastewater in Submerged Biofilter)

  • 오승용;조재윤;김인배
    • 한국양식학회지
    • /
    • 제10권3호
    • /
    • pp.335-346
    • /
    • 1997
  • 연구는 순환 여과식 어류 양식 시설에 일반적으로 이용되고 있는 선라이트 골판을 여과재료로 한 침지식 여과조의 적정 탈질 조건을 구명하기 위해 외부 탄소원으로 메탄올과 글루코스를 사용하여 수리학적 체류 시간 (hydraulic retention time, HRT)과 COD에 대한 NO 하(3) 상(-)-N 비율 변화에 따른 적정 탈질 조건을 알아보았다. 질산성 질소와 총무기질소(TIN)의 제거 효율은 HRT 4 시간보다는 8 시간이 좋았으며, 글루코스보다는 메탄올을 이용한 것이 좋았다(P<0.05). 최대 질산성 질소 제거는 글루코스의 경우 HRT 8 시간과 C : N 비율 4일 때 86.3%였고, 메탄올은 HRT 8시간과 C : N 비율 5일 때 97.8%, 6일 때 92.2%를 보여 C : N 비율 5가 가장 최적인 것으로 나타났다. 최대 총무기질소 제거 효율은 HRT 8 시간일 때 C : N 비율 5에서 글루코스는 71.5%, 메탄올은 96.9%을 보였다. 탈질화에 필수적인 혐기적 조건은 HRT 8 시간과 C : N 비율 5 이상이 되었을 때 이루어진 것으로 보아 적정 C : N 비율과 혐기적 조건이 이루어졌을 때의 최적의 탈질 효율을 보이는 것으로 나타났다.

  • PDF

ApPDE4 long-form의 N-말단 돌연변이체들의 세포내타기팅과 타기팅 기전 분석 (Analysis of molecular mechanism of cellular localization of various N-terminal mutants of Aplysia PDE4 in HEK293T cells)

  • 엄수민;전용우;김건형;이진아;장덕진
    • 분석과학
    • /
    • 제29권1호
    • /
    • pp.10-18
    • /
    • 2016
  • Phosphodiesterase(PDE)는 세포내에서 cAMP를 분해하는 효소로 세포의 신호 전달에 중요한 기능을 수행하는 것으로 알려져 왔다. 이전의 연구를 통해 군소에서 클로닝된 PDE4 long-form의 N-말단에 위치하는 16개 아미노산만으로 충분히 원형질막에 타기팅됨을 알 수 있었다. 본 연구에서는 ApPDE4의 N-말단 16개(L(N16))를 주형으로 해서 9-11번째와 15번째 아미노산들(RHW-C)을 무작위적으로 아마노산에 돌연변이를 주어서 세포내 타기팅에 미치는 영향을 분석해 보았다. 본 연구를 통해 원형질막과 골지체로 타기팅되는 돌연변이체들과 골지체로만 타기팅되는 돌연변이체들과, 소포체와 골지체로 동시에 타기팅되는 돌연변이체들과, 세포질에만 위치하는 돌연변이체들을 얻을 수 있었다. 또한, 이러한 타기팅에 palmitoylation이 영향을 주는지 확인하기 위해 palmitoylation 억제제인 2-BR을 처리해보니 대부분의 돌연변이체에서 원형질막 타기팅이 사라지는 것을 확인하였다. 이를통해 palmitoylation이 ApPDE4 돌연변이체들의 원형질막 타기팅에 중요하다는 사실을 확인할 수 있었다. 또한, 이들 돌연변이체들중 골지체로만 타기팅되는 L(N16,C3S/VV/G)-mRFP와 L(N16,C3S/LFS/R)-mRFP와 L(N16,EPL/R)-mRFP들의 경우는 골지체 타기팅에 인지질 중에 하나인 PI4P가 중요한 역할을 하는 것을 알 수 있었다.

GENERALIZED MODULE LEFT (m, n)-DERIVATIONS

  • Lee, Sung Jin;Lee, Jung Rye
    • 한국수학교육학회지시리즈B:순수및응용수학
    • /
    • 제23권4호
    • /
    • pp.385-387
    • /
    • 2016
  • $Fo{\check{s}}ner$ [4] defined a generalized module left (m, n)-derivation and proved the Hyers-Ulam stability of generalized module left (m, n)-derivations. In this note, we prove that every generalized module left (m, n)-derivation is trival if the algebra is unital and $m{\neq}n$.

IMPROVED UPPER BOUNDS OF PROBABILITY

  • Lee, Min-Young;Jo, Moon-Shik
    • 대한수학회논문집
    • /
    • 제18권4호
    • /
    • pp.725-736
    • /
    • 2003
  • Let $A_1,{\;}A_2,...,A_n$ be a sequence of events on a given probability space. Let $m_n$ be the number of those $A'_{j}s$ which occur. Upper bounds of P($m_n{\;}\geq{\;}1) are obtained by means of probability of consecutive terms which reduce the number of terms in binomial moments $S_2,n,S_3,n$ and $S_4,n$.

EVALUATIONS OF THE ROGERS-RAMANUJAN CONTINUED FRACTION BY THETA-FUNCTION IDENTITIES

  • Paek, Dae Hyun
    • 한국수학교육학회지시리즈B:순수및응용수학
    • /
    • 제28권4호
    • /
    • pp.377-386
    • /
    • 2021
  • In this paper, we use theta-function identities involving parameters 𝑙5,n, 𝑙'5,n, and 𝑙'5,4n to evaluate the Rogers-Ramanujan continued fractions $R(e^{-2{\pi}{\sqrt{n/20}}})$ and $S(e^{-{\pi}{\sqrt{n/5}}})$ for some positive rational numbers n.

제주도 한라산 1100 고지 대기 에어로졸의 조성 및 특성 (Compositions and Characteristics of Atmospheric Aerosols Collected at the 1100 Site in Mt. Halla, Jeiu)

  • 김원형;강창희;신찬성;고선영;홍민선
    • 한국대기환경학회지
    • /
    • 제19권2호
    • /
    • pp.145-156
    • /
    • 2003
  • The atmospheric aerosols collected at the 1100 site located in Mt. Halla have been analyzed to investigate their compositions and chemical characteristics . The average concentrations of water-soluble cations were in the order of N $H_{4}$$^{+}$ > $Ca^{2+}$ > N $a^{+}$ > $K^{+}$ > $Mg^{2+}$ during the spring, showing high increase of $Ca^{2+}$ concentration with the value of 0.60 $\mu\textrm{g}$/ $m^3$, and N $H_{4}$$^{+}$> N $a^{+}$> $K^{+}$> $Ca^{2+}$ > $Mg^{2+}$ during the other seasons. The average concentrations of anions have shown in the order of S $O_{4}$$^{2-}$ > N $O_{3}$$^{[-10]}$ >C $l^{[-10]}$ for all seasons, and S $O_{4}$$^{2-}$ and N $O_{3}$$^{[-10]}$ had higher concentrations in spring with the values of 4.84 $\mu\textrm{g}$/ $m^3$ and 1.08 $\mu\textrm{g}$/ $m^3$, respectively. From the analytical data of size-segregated particles by cascade impactor sampling, the components of N $H_{4}$$^{+}$, S $O_{4}$$^{2-}$, N $O_{3}$$^{[-10]}$ and $K^{+}$ were distributed mainly in fine particles, but $Ca^{2+}$, N $a^{+}$, $Mg^{2+}$ and C $l^{[-10]}$ were included mostly in coarse particles. The correlation coefficients of nss-S $O_{4}$$^{2-}$/N $H_{4}$$^{+}$, nss-S $O_{4}$$^{2-}$/ $K^{+}$ and N $O_{3}$$^{[-10]}$ /nss-C $a^{2+}$ showed quite high values with 0.871, 0.857 and 0.654, respectively Based on the study of enrichment factors, it is considered that N $a^{+}$, $Mg^{2+}$, C $l^{[-10]}$ and $Ca^{2+}$ components were delivered from oceanic and soil sources, but S $O_{4}$$^{2-}$, N $O_{3}$$^{[-10]}$ and N $H_{4}$$^{+}$ might have other source origins. The factor analysis study showed the aerosol at the 1100 site was influenced mainly by anthropogenic factors, followed by oceanic and soil factors. followed by oceanic and soil factors.

산림토양내(山林土壤內) 질소(窒素)의 양료화(養料化)와 질산화(窒酸化)에 관(關)한 연구(硏究) : ion 교환수지(交換樹指)의 처리(處理) 방법(方法)에 따른 질소(窒素)의 흡수율(吸收率) 변화(變化) (N Mineralization and Nitrification in Forest Soils : Effect of Chemical Treatment on N Adsorption by Ion Exchange Resin)

  • 이천용
    • 한국산림과학회지
    • /
    • 제79권3호
    • /
    • pp.285-289
    • /
    • 1990
  • 산림토양내(山林土壤內) N 양료화(養料化)와 질산화(窒酸化)를 구명(究明)하기 위하여 최근(最近) 많이 사용하고 있는 ion 교환 (交換) 수지(樹脂) (Ion Exchange Resin : IER)의 방법(方法)을 구명(究明)하고 실험실(實驗室)과 토양(土壤)에 묻었던 IER의 재사용(再使用) 여부를 판단(判斷)하기 위하여 흡수율(吸收率)을 분석(分析)하였다. IER 20g을 나이론 스타킹에 넣고 무처리구, 2M NaCl에 진탕한 후 물에 씻은 처리구(處理區)(2M NaCl구(區), 4M NaCl에 진탕한 처리구(處理區)로서 N 흡수율(吸收率)을 분석(分析)한 결과(結果) 2M NaCl구(區)의 IER은 $NH_4$$NO_3$를 각각(各各) 70, 60% 흡수(吸收)하여 가장 높은 결과를 보였고 4M NaCl구(區)는 40%정도의 흡수율(吸收率)을 나타냈다. 무처리(無處理) IER은 $NO_3$ 흡수율에서 2M NaCl구(區)와 비슷하였으나 $NH_4$는 낮은 N 농도에서 과대치를 나타냈다. 재사용(再使用)한 IER의 흡수율은 60~80%로서 일정한 흡수율을 나타내지 않았지만 전처리(前處理)로서, 흡수율(吸收率)을 구명(究明)하여 N 농도별로 각각(各各) 흡수율(吸收率)을 적용하면 재사용이 가능할 것으로 판단(判斷)된다.

  • PDF

ON PERMUTING n-DERIVATIONS IN NEAR-RINGS

  • Ashraf, Mohammad;Siddeeque, Mohammad Aslam
    • 대한수학회논문집
    • /
    • 제28권4호
    • /
    • pp.697-707
    • /
    • 2013
  • In this paper, we introduce the notion of permuting $n$-derivations in near-ring N and investigate commutativity of addition and multiplication of N. Further, under certain constrants on a $n!$-torsion free prime near-ring N, it is shown that a permuting $n$-additive mapping D on N is zero if the trace $d$ of D is zero. Finally, some more related results are also obtained.

Novel Synthesis and Properties of $Si_3N_4$-based Nano/Nano-Type Composites

  • Yoshimura, Masahi
    • 한국분말재료학회지
    • /
    • 제8권3호
    • /
    • pp.210-213
    • /
    • 2001
  • $Si_3N_4$/TiN nano/nano-type composites were successfully fabricated by the combination of a mechano-chemical grinding (MCG) method and a short time sintering process, and their wear resistance was evaluated. Powder mixtures of $\alpha-Si_3N_4$and Ti were prepared using mechano-chemical grinding process and the resulting nanocomposite powder mixtures were consolidated using pulsed electric current sintering (PECS). TEM observation showed that the nano/nano-type composites consisted of homogeneous and very fine matrix grains with the size less than 100 nm. The obtained $Si_3N_4$-based nano/nano-type showed high wear resistance and electric discharge machinability.

  • PDF