• Analytical Science and Technology
• /
• v.14 no.6
• /
• pp.535-539
• /
• 2001

One-dimensional coordination polymer of cadmium(II) complex, $[Cd(SCN)_2(C_4H_6N_2]_n$, has been prepared and characterized by X-ray single crystallography. Structure analysis reveals that each cadmium(II) atom is six-coordinated in distorted octahedral fashion with $CdS_2N_4$ composition. $CdS_2N_4$ composition contains two S and two N atoms from four thiocyanates and tow N atoms from two 4-methylimidazole ligands. Central cadmium(II) atoms are run in parallel to the a-axis and are doubly bridged with neighboring cadmium(II) atoms by the thiocyanate and isothiocyanate ligands. Thus, this complex has a one-dimensional polymer structure in which the 4-methylimidazole is in the trans conformation.

• Journal of the Korean Mathematical Society
• /
• v.43 no.4
• /
• pp.783-801
• /
• 2006

Let A be the mod p Steenrod algebra for p an arbitrary odd prime and S the sphere spectrum localized at p. In this paper, some useful propositions about the May spectral sequence are first given, and then, two new nontrivial homotopy elements ${\alpha}_1{\jmath}{\xi}_n\;(p{\geq}5,n\;{\geq}\;3)\;and\;{\gamma}_s{\alpha}_1{\jmath}{\xi}_n\;(p\;{\geq}\;7,\;n\;{\geq}\;4)$ are detected in the stable homotopy groups of spheres, where ${\xi}_n\;{\in}\;{\pi}_{p^nq+pq-2}M$ is obtained in [2]. The new ones are of degree 2(p - 1)($p^n+p+1$) - 4 and 2(p - 1)($p^n+sp^2$ + sp + (s - 1)) - 7 and are represented up to nonzero scalar by $b_0h_0h_n,\;b_0h_0h_n\tilde{\gamma}_s\;{\neq}\;0\;{\in}\;Ext^{*,*}_A^(Z_p,\;Z_p)$ in the Adams spectral sequence respectively, where $3\;{\leq}\;s\;<\;p-2$.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1988.06a
• /
• pp.39-42
• /
• 1988

요업체 절삭공구(ceramic tool)는 공구강이나 초경제품에 비해 고속 절삭 작업이 가능하며 생산성을 높일 수 있기 때문에 최근 주목을 받고 있다. 본 실험에서 모재(substrate)로 사용된 $Si_3N_4$-TiC ceramic은 요업체 공구중에서 파괴인성이 우수하며, 주철이나 초합금을 절삭할 때 우수한 성능을 나타낸다. 그러나 요업체 절삭공구중에서 경도가 낮은 편에 속하며, Fe,Mn,O와 $Si_3N_4$가 화학적 반응을 일으켜서, steel을 절삭할 때 상면 마모(crater wear)가 심하게 발생하기 때문에 우수한 성능을 나타내지 못하고 있는 실정이다. 따라서 이러한 단점을 보완하기 위해 공구의 표면에 보호피막(protective coating)을 입히는 것은 필수적이다. 본 연구에서는 반응변수들이 TiC 및 TiN 증착층의 증착속도, 미세구조, 화학적 조성 및 증착층과 substrate 사이의 interface를 조사하여 각 증착층의 최적증착조건을 규명하고자 한다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.4
• /
• pp.585-589
• /
• 2012

The characteristics of interface layer and the effect of mole fraction of inlet gas mixture($B_2H_6/H_2/N_2/TiCl_4$) on the microstructure of Ti(B,N) films were studied by microwave plasma hot filament CVD process. Ti(B,N) films were deposited on a substrate(STD-61) to develop a high performance of resistance wear coating tool. Ti(B,N) films were obtained at a gas pressure of 1 torr, bias voltage of 300 V and substrate temperature of $480^{\circ}C$ in $B_2H_6/H_2/N_2/TiCl_4$gas system. It was found that TiN, $TiB_2$, TiB and hexagonal boron nitride(h-BN) phases exist in thin layer on the STD-61.

• Archives of Pharmacal Research
• /
• v.13 no.1
• /
• pp.78-81
• /
• 1990

N-Aryl-N'(4-hydroxy-6-methyl-2-pyrimidinyl)guanidines (IIa-c) were prepared by cyclization of N-arybiguanides (Ia-c) with ethyl acetoacetate. Coupling of compounds (IIa-c) with the appropriate diazotized arylamine gave N-aryl-N'-(5-arylhydrazono-6-methyl-4-oxopyrimidin-2-yl) guanidines (IIIa-f). Whereas, their chlorination with phosphorus oxychloride followed by treatment of N-aryl-N'-(4-Chloro-6-methyl-2-pyrimidinyl)guanidimes (IVac) with the appropriate arylamine afforded the corresponding 4-arylamino derivatives (Vaf). Compounds (IIa-f) were also formed when compounds (1a-c) were treated with ethyl 2-arylhydrazono-3-oxobutyrates. The antimircobial testing of some of the prepared compounds against some pathogenic microorganisms revealed that only two have a marked effect against Escherichia coli.

• Journal of the Korean Ceramic Society
• /
• v.37 no.2
• /
• pp.152-157
• /
• 2000

Si3N4/SiC nanocomposite ceramics containing 5 wt%dispersed SiC particles were prepared by gas-pressure-sintering at 200$0^{\circ}C$ under nitrogen atmosphere. SiC particles with average sizes of 0.2 and 0.5${\mu}{\textrm}{m}$ were used, and the effect of the SiC particle size on the microstructure was investigated. The addition of SiC particles effectively suppressed the growth of the Si3N4 matrix grains. The effect of grain growth inhibition was higher in the nanocomposites dispersed with fine SiC. SiC particles were dispersed uniformly inside Si3N4 matrix grains and on grain boundaries. When the fine SiC particles were added, large fraction of the SiC particles was trapped inside the grains. On the other hand, when the large SiC particles were added, most of the SiC particles were located on grain boundaries. Typically, the fraction of SiC particles located at grain boundaries was higher in the specimen prepared from $\beta$-Si3N4 than in the specimen prepared from $\alpha$-Si3N4.

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.136-140
• /
• 1993

New synthetic method for diethyl N-[4-{[(2,4-diamino-6-yl)methyl]-amino}benzoyl]-L-glutamate(10) which is an intermediate of methotrexate is described. p-Nitrobenzoyl-L-glutamate was obtained via a two-step sequence which involves condensation of p-nitrobenzoyl chloride with diethyl-L-glutamate and Fischer esterification reaction with ethanol. Reductive methylation of diethyl-p-nitrobenzoyl-L-glutamate were carried out by reaction with formic acid and paraformaldehyde in the presence of $PtO_2$ catalyst and yielded diethyl N-(4-methylaminobenzoyl)-L-glutamate(7). It was followed by allylation and iodoazidozation to give the diethyl-p-[N-(2-azido-3-iodopropyl)-N-methyl]aminobenzoyl-L-glutamate(9). The cyclization reaction of compound(9) with 2,4,5,6-tetraaminopyrimidine was carried out by intermolecular nucleophilic substitution to give the desired methotrexate diethylester.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2002.05a
• /
• pp.49-49
• /
• 2002

독립된 티타늄(Ti)과 실리콘(Si) 타켓을 사용하여 DC reactive magnetron co-sputtering 공 정으로 Ti-Si-N 코탱막을 SKD 11 합금강위에 합성하였다. 고분해능 TEM 및 XPS 분석들로부터 Ti-Si-N 코탱막은 나노미터 크기의 TiN결정체들이 비정질 Si3N4 기지에 분산된 나노복합체의 마세구조를 냐타내었다. 코탱막의 경도는 11 at.%의 Si 함량에서 39 GPa의 최 고 경도값을 나타내었고 이 경우 미셰조직은 5nm 크기의 미세한 TiN 결정이 비정절상의 기지에 균일하게 분포된 특성을 보였다 .. Ti-Si-N 박막내에 Si 함량이 증가할수록 TiN 결정 상들은 다배향성을 나타내었고 크기가 감소하였으며 비정질상에 의해 완전히 둘려싸언 형상 으로 변화하였다. 높은 Si 함량에서는 질소 소스의 부족현상에 의하여 코팅막내에서 free Si 가 나타났다. 상대습도가 증가함에 따라 Ti-Si-N 코탱막의 마찰계수와 마모량이 현저하게 감소하였다. 강재에 대한 Ti-Si-N 코팅막의 마모거동에 있어서 Si02 냐 Si(OH)2 같은 얇은 윤활막의 형성이 중요한 역할을 하는 것으로 판단되어졌다.

• Journal of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.128-133
• /
• 1965

Hydrazonium diphosphate crystallizes with the space-group symmetry $P2_1/C.$ There are two formular units of $N_2H_6H_4(PO_4)_2$ in the unit cell, for which $a = 4.52{\pm}0.02, b = 8.06{\pm}0.03, c = 10.74{\pm}0.03{\AA}\;and\; {\beta} = 100{\pm}0.5^{\circ}.$ The determination of the crystal structure was carried out by means of Patterson, Fourier and difference syntheses. The phosphate group has configuration of nearly regular tetrahedron with the mean P-O distance of $1.55{\AA}.$ The N-N distance found is $1.40{\AA},$ which corresponds to previously reported values for the $N_2H_6^{++} \;ion \;in\; N_2H_6SO_4.$ A molecule has a transform with a center of symmetry in it. Each nitrogen atom forms three hydrogen bonds with the N…O distances 2.62, 2.79 and $2.89{\AA}.$ And a O…O hydrogen bond between different phosphate groups is found with the distance $2.63{\AA}.$ The structure is held together by three-dimensional network of the strong hydrogen bonds.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.2
• /
• pp.53-63
• /
• 1994

In order to investigate the effects of application rates of mineral N and cattle slurry on the dry matter yield of Reed canarygrass grown in different cutting frequency, was was cernpared for the efficiency of N utilization. Annual rates of mineral N and cattle slurry N of 0 (control), 90kg, 180kg, 270kg and 360kg/ha in 3 cuttings, 0, 120kg, 240kg, 360kg and 480kg/ha in 4 cuttings, and 0, 150kg, 300kg, 450kg and 600kg/ha were applied as urea and cattle slurry in 5 cuttings, respectively. The results were summarized as follows: 1. The annual dry matter yields were increased with application rates of mineral N and cattle slurry. The annual dry matter yields of mineral N obtained were 14.4 ton/ha(ranged from 10.46 ton to 16.91 ton/ha) in 3 cuttings, 13.88 ton/ha(ranged from 9.91 ton to 16.53 ton/ha) in 4 cuttings and 15.98 ton/ha(ranged from 12.0 ton to 18.25 ton/ha) in 5 cuttings. The annual dry matter yields of cattle slurry obtained were 12.14ton/ha(ranged from 8.92 ton to 11.79ton/ha) in 3 cuttings, 10.81ton/ha(ranged from 8.92 to 11.79 ton/ha) in 4 cuttings and 12.98ton/ha(ranged from 10.68 ton to 14.85ton/ha) in 5 cuttings. 2. Relative dry matter yield of cattle slurry as compared to mineral N were 84.3%, 77.9% and 81.2% in 3, 4 and 5 cuttings. 3. Average increase in dry matter production(kgDM/kgN) tended to decrease with application rates of mineral N and cattle slurry, and higher cutting frequencies. Average increase in dry matter production obtained were higher values at rates of 30kg/ha/cut in both of mineral N and cattle slurry. Average increase in dry matter production to mineral N were 23.9kg, 18.8kg and 15.2kgin 3, 4 and 5 cuttings, respectively. 4. Average increase in total nitrogen yield(kgTN/kgN) to mineral N obtained were 0.46kg at rates of 60kg/ha/cut in 3 cuttings, and 0.45kg and 0.40kg at rates of 30kg/ha/cut in 4 and 5 cuttings. 5. Average increase in dry matter production(kgDM/kgN) to cattle slurry obtained were 13.7kg and 19.5kg at rates of 30kg/ha/cut in 3 and 4 cuttings, and 9.7kg at rates of 60kg/ha/cut in 5 cuttings. 6. Average increase in total nitrogen yield(kgTN/kgN) to cattle slurry was not concern to the rates of application. Average increase in total nitrogen yield to cattle slurry obtained were 0.11kg, 0.20kg and 0.21kg in 3, 4 and 5 cuttings. 7. Relative average increase in dry matter production of cattle slurry as compared to mineral N were 33.1%, 52.1% and 50.0% in 3, 4 and 5 cuttings. Relative average increase in total nitrogen yield of cattle slurry as compared to mineral N were 28.9%, 51.3% and 55.3% in 3, 4 and 5 cuttings.