• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.189-193
• /
• 2008

In this study, the effect of reaction conditions on the transesterification of soybean oil and methanol was investigated in a high-pressure-fixed-bed-reactor-system with zinc aluminate catalysts. Without catalysts, high-pressure-reaction at $300^{\circ}C$ and 1,200 psi brought 19% yields of methyl esters, which was caused by the approach of reaction condition to supercritical point of methanol. However, except the specific reaction condition, the yields in the reaction with no catalyst were very low below 4.5%. The zinc aluminate was prepared as catalyst by coprecipitation and characterized with $N_2$ gas adsorption/desorption and X-ray diffraction. With catalyst, the effect of the reaction parameters such as temperature, pressure, and molar ratio of reactants on biodiesel production was demonstrated. The higher temperature, pressure, and methanol molar ratio to soybean oil, the more yields of methyl esters. It was proved that among the reaction parameters, the reaction temperature be the most influential variable on methyl ester yields.

• Elastomers and Composites
• /
• v.36 no.2
• /
• pp.102-110
• /
• 2001

The three types of surfactants such as nonylphenoxy poly(ethylene) ethanol homologues, caster oil poly(ethylene) ethanol homologues, and sodium perfluoroalkyl carboxylates are used to improve the wettability of rubber impression material. Among the surfactants, the usage of sodium perfluoroalkyl carboxylates containing fluoro group resulted in the lowest surface energy of impression material and the result gave the positive effect on the wettability of rubber impression material to teeth. Also, the anti-foaming agents were used to reduce or remove the hydrogen gas generating on the impression material by reaction. In the case of rubber impression material containing sodium perfluoroalkyl carboxylate as a surfactant, it was found that the tear strength of rubber impression material increased over 3 N/mm with the addition of anti-forming agent. Therefore, the anti-foaming agent could contribute to the mechanical property of rubber impression material without the change of surface property.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1757-1762
• /
• 2006

A solvent sublation using salphen as a ligand was studied and applied for the determination of trace Ni(II), Co(II) and Cu(II) in water samples. The fundamental study was investigated by a solvent extraction process because the solvent sublation was done by extracting the floated analytes into an organic solvent from the aqueous solution. The salphen complexes of Ni(II), Co(II) and Cu(II) ions were formed in an alkaline solution of more than pH 8 and then they were extracted into m-xylene. It was known that the each metallic ion formed 1 : 1 complex with the salphen and the logarithmic values of extraction constants for the complexes were 3.3 5.1 as an average value. Based on the preliminary study, the procedure was fixed for the separation and concentration of the analytes in samples. Various conditions such as the pH of solutions, the influence of $NaClO_4$, the bubbling rate and time of $N_2$ gas, and the type of organic solvent were optimized. The metal-salphen complexes could be extracted into m-xylene from the solution of more than pH 8, but the pH could be shifted to acidic solution of pH 6 by the addition of $NaClO_4$. In addition, the solvent sublation efficiency of the analytes was increased by adding $NaClO_4$. The recovery of 97-115% was obtained in the spiked samples in which given amounts of 0.3 mg/L Ni(II), 0.8 mg/L Co(II) and 0.04 mg/L Cu(II) were added.

• Journal of Environmental Science International
• /
• v.11 no.3
• /
• pp.215-225
• /
• 2002

In order to evaluate the relationship between geochemical characteristics and benthic facies of the sediments from the Oenaro Island where red tide proliferation is first observed every year including this year, surface and short multiple core sediment samples were analyzed in terms of geochemical and benthic facies variation. The contents of organic carbon, carbonate, and sulfide gas were relatively low. The variation in C/N ratios, which indicate nature of organic carbon, suggested that the organic carbon recorded in the study area is composed of mixtures of marine and terrigenous organic matters. The concentration of minor elements found at the surface and multiple core sediment samples were also low as well as the enrichment factors(Ef) for the seven heavy metals indicated that the sediment of this area is not polluted significantly. The macrobenthic faunal community comprised 61 species, and their mean density was 708 ind./m2. Polychaete worms were major taxa of this benthic community. A crustacean amphipod, Melita sp. was the most abundant species accounted for 20.7% of total abundance, and the small polychaetes such as Heteromastus filiformis, Paralacydonia poradoxa, Magelona japonica and Sigambra tentaculata were the next dominant species. The macrobenthos around the Oenaro Island were more diverse and abundant than that in Gamak Bay. The benthic communities in the study area sustained somewhat different species composition based on the cluster analysis and the MDS ordination. The benthic community health condition at three stations seemed to be unbalanced, and slightly polluted based on the biological index such as BPI and BC. There was no clear relationship between the geochemistry characteristic and the benthic faunal facies attributed by the micro-algal blooms in this coastal area.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1637-1638
• /
• 2006

HVAC 시스템은 쾌적하고 깨끗한 운전환경을 만들어 줌으로써 운전자에게 향상된 안락성과 안전성을 제공한다. 이때 센서는 시시각각으로 변화하는 차실 내외의 환경변화에 대한 정보를 검출하여 HVAC 제어 유니트에 제공한다. 현재 HVAC 시스템에 사용되고 있는 후막 가스센서는 소자 크기와 소비전력이 크고, 제작공정이 까다로워 생산성이 낮은 단점이 있다. 이와 같은 문제점을 해결하기 위해서 최근에는 초소형화, 저소비전력, 대량생산에 의한 저가격화가 가능한 MEMS 가스센서의 연구개발이 활발히 진행되고 있다. 본 연구에서는 MEMS 구조체를 이용한 마이크로 가스센서를 설계 및 제작하였고, 감도특성을 고찰하였다. 가스 감지막은 금속산화물 페이스트를 스크린 프린팅 하는 종래의 방법 대신 MEMS 구조체에 적용 가능한 sol-gel 프로세스에 의해 형성하였다. 또 가스 감지전극과 micro-heater를 동일 평면상에 제작, 공정을 간소화하여 저가화를 시도하였다. MEMS 구조체 위에 제작된 Pt 박막 micro-heater의 인가전압에 따른 발열특성을 조사한 결과, 발열온도가 인가전압에 비례하는 이상적인 선형성을 나타내었으며, $300^{\circ}C$의 동작 온도에 도달하기 위해 65mW 이하의 저전력 동작이 가능하였다. 가스 센서의 감도특성 확인 실험은 CO 가스 10ppm, NO 가스 0.3ppm을 기준으로 수행되었으며, CO 및 NO에 대해 Rs(sensitivity, 가스반응저항/초기저항) 값은 각각 0.753 과 2.416로 우수한 성능을 나타내었다.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.11
• /
• pp.1174-1178
• /
• 2011

Exopolysaccharides (EPSs) are microbial polysaccharides that are released outside of the bacterial cell wall. There have been few studies on EPS-producing lactic acid bacteria that can enhance macrophage activity and the underlying signaling mechanism for cytokine expression. In the current study, EPS-overproducing Lactobacillus (L.) paracasei KB28 was isolated from kimchi and cultivated in conditioned media containing glucose, sucrose, and lactose. The whole bacterial cells were obtained with their EPS being attached, and the cytokine-inducing activities of these cells were investigated. Gas chromatography analysis showed the presence of glucose, galactose, mannose, xylose, arabinose, and rhamnose in EPS composition. EPS-producing L. paracasei KB28 induced the expression of tumor necrosis factor (TNF)-${\alpha}$, interleukin (IL)-6, and IL-12 in mouse macrophages. This strain also caused the degradation of $I{\kappa}B{\alpha}$ and phosphorylation of the major MAPKs: Jun N-terminal kinase (JNK), p38, and extracellular signal-regulated kinase (ERK)1/2. The use of pharmacological inhibitors showed that different signaling pathways were involved in the induction of TNF-${\alpha}$, IL-6 and IL-12 by L. paracasei KB28. Our results provide information for a better understanding of the molecular mechanisms of the immunomodulatory effect of food-derived EPS-producing lactic acid bacteria.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.179-185
• /
• 2000

In this study, we examined the movement of chlorophenol as a precursor of the dioxin in the after-combustion to minimize the creation and emission of dioxin in a municipal waste incinerator. The CPs was injected to the electric incinerator in temperature $300{\sim}500^{\circ}C$, using $N_2$ gas to control the reaction time, The oxygen quantity supplied into the $CP_s's$ isomer combustion was added with the value of experience formula. When the space velocity in reactor was 60~80/sec, the removal efficiency of CP was obtained in the presence of Mo-V catalyst and non catalyst. The efficiency in non-catalyst was 74% to 80% mono-CP, di-CP 55~66%, tri-CP 50~58%, while mono-CP 90~99.9%, di-CP 96~97%, tri-CP 76~99% in a catalyst. Consequently, it was shown that these were 20~30% more efficienct than those.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.373-376
• /
• 2006

본 연구의 목적은 동해 울릉분지의 제4기 후기 퇴적물 내의 유기물, 공극수와 메탄의 특징 및 상호작용을 규명하는데 있다. 연구지역에서 채취한 코어퇴적물을 원소 분석한 결과 C/N 및 C/S 비(wt. %)는 퇴적물 내 유기물이 주로 해양조류 기원을 가지고, 일반적인 해양 또는 정체 환경에서 퇴적되어Tdam을 지시한다. 그러나 Rock-Eval 열분석 결과는 유기물 기원이 육상식물(Type III)이고, 열적 성숙단계가 미성숙단계임을 보여준다. 이러한 원소분석과 열분석간의 상반된 결과는 유기물이 침강하는 동안 또는 퇴적 후 이루어진 강한 산화작용에 기인한 것으로 추정된다. 퇴적물 내 공극수의 황산염 농도가 퇴적물의 심도가 증가할수록 감소하며, 감소하는 경향은 크게 두 가지 (적선성, concave down)로 나누어진다. 이는 모든 코어에서 황산엽 환원작용이 일어나고 있음을 지시한다. 또한 직선선의 황산엽농도 구배는 무산소 메탄 산화작용(AMO)의 전형적인 특징이다. 황산염 농도의 수직적 구배를 이용하여 SMI(sulfate-methane interface) 심도를 계산하면, 남부울릉분지의 코어 (03GHP-01, 03GHP-02; <3.5mbsf)가 북부울릉분지 코어(01GHP-05, 01GHP-07, 03GHP-03, 03GHP-04, 03GHP-05; > 6mbsf)보다 낮은 값을 갖는다. 위와 같은 SMI 심도차는 메탄의 상부 분산량과 밀접한 관련있는 것으로 추정된다. 메탄가스의 탄소 안정동위원소 $({\delta}^{13}C)$ 분석값들은 -83.5%o에서 -69.5%o의 범위를 가지고 있고, 이산화탄소 환원작용($CO)_2$ reduction)에 의한 생물 (biogenic) 기원임을 지시한다.

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.204-209
• /
• 2012

In this study, kinetics data was obtained for steam reforming reaction of ethane over the commercial ruthenium catalyst. The variables of ethane steam reforming were the reaction temperature, partial pressure of ethane, and steam/ethane mole ratio. Parameters for the power rate law kinetic model and the Langmuir-Hinshelwood model were obtained from the kinetic data. Also, sizing of steam reforming reactor was performed by using PRO/II simulator. The reactor size calculated by the power rate law kinetic model was bigger than that of using the Langmuir-Hinshelwood model for the same conversion of ethane. Reactor size calculated by the Langmuir-Hinshelwood model seems to be more suitable for the reactor design because the Langmuir-Hinshelwood model was more consistent with the experimental results.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.3
• /
• pp.216-222
• /
• 2017

This study was conducted to examine the effect of corn (Zea mays L.) - soybean (Glycine max L.) silage prepared by intercropping method on the nutritive value of the silage, in vitro rumen fermentation characteristics, dry matter degradability, as well as milk yield and milk composition of dairy cows. In a couple of experiments intercropped corn-soybean silage (CSBS) was compared with corn silage (CS) and/or Italian ryegrass hay (IRG). Numerically, CSBS had higher crude protein, ether extract, and lactic acid contents compared to CS. In vitro rumen fermentation analysis demonstrated that up to a 24-h incubation period, both CS and CSBS showed higher total gas production, ammonia N concentration, and dry matter degradability compared to IRG (p<0.05). The investigation on animals was conducted in a commercial dairy farm located in Gyeongju, South Korea, employing 42 Holstein cows that were divided into 2 group treatments: CS and CSBS in a completely randomized design. Although no significant difference was observed in milk yield, animals fed on CSBS showed significantly higher milk protein (p<0.05) and milk fat content (p<0.01), compared to animals fed on CS. Taken together, our findings indicate that corn-soybean silage that is cultivated, harvested, and prepared through intercropping can improve the protein content of the silage, and can also enhance in vitro rumen fermentation, dry matter degradability, and performance of dairy cattle.