• Elastomers and Composites
• /
• 제13권2호
• /
• pp.89-98
• /
• 1978

1. The effect of reactive type antioxidant, G-1 in comparism to ordinary antioxidant, SP, which are used for NR and SBR has teen studied, and its recipes are equal. The effects against ozone aye been shown that ill ordinary antioxidant, SBR, no an particular effect both for NR and SBR was found, where as in reactive type, considerable influence was recogniged particulary in dynamic ozone test. 2. The influence of reactive antioxidants on velcanization has been studied by means of Mooney viscometer and Rheometer. 3. The ageing properties of vulcanizates containing reactive antioxidant have been studied in terms of tensile strength.

• Elastomers and Composites
• /
• 제36권1호
• /
• pp.30-36
• /
• 2001

이 연구의 목적은 카본블랙이 충전된 천연고무에서 비 등방성 발생에 영향을 주는 인자를 조사하기 위함이다. 고분자 사슬의 방향성은 인장특성에 영향을 준다. Pre-strained 방향의 parallel 시편은 등방성 혹은 perpendicular 시편에 비하여 낮은 인장영역에서 낮은 강도를 보이지만 높은 신장영역에서 높은 강도를 보인다. 고 인장 영역에서 parallel한 천연고무 시편은 비결정성인 SBR에 비하여 높은 강도를 보여주고 있다. 이것은 parallel 시편의 방향성에 영향을 받는 것으로, 시편의 방향성은 2차 인장시 결정화를 위한 핵으로 작용하여 결정화도를 증가시키는 것으로 보인다.

• Elastomers and Composites
• /
• 제34권1호
• /
• pp.31-44
• /
• 1999

4종류의 고무(NR, SBR, EPDM, BIMS)에 대해 완전가교 고무층과 부분가교 고무층간 계면 결합의 변화에 따른 계면 접착강도를 $30{\sim}120^{\circ}C$ 조건에서 조사하였고, 전자현미경을 이용하여 접착파단면을 조사하였다. 두 개의 완전가교 고무층간 계면에서는 물리적 결합이 계면 접착강도에 주도적인 역할을 하였고, 완전가교 고무층과 부분가교 고무층간 계면에는 물리적 결합과 화학적 결합이 공존하여 계면 접착강도에 영향을 미쳤다. 접착강도가 응집 인열강도와 유사한 수준으로 높을 때 NR은 "계면 노티인열" 형태를, EPDM은 "cross-hatched" 형태를 보였다.

• Elastomers and Composites
• /
• 제16권3호
• /
• pp.141-150
• /
• 1981

• 한국대기환경학회지
• /
• 제3권2호
• /
• pp.39-45
• /
• 1987

Rubber particles emitted from automobile tire tread by abrasion were collected by Andersen sampler with atmospheric dusts. The samples of atmospheric dusts at each stage were analysed for rubber particles by Curie point pyrolysis-gas chromatography with Apiezon grease L column. Pyrolysis was done at 740$^circ$C for 5 seconds. In the pyrogram, NR rubber (bus and truck tire tread) was determined by isoprene peak, and SBR rubber (passenger car tire tread) was determined by styrene peak simultaneously. The size distribution of rubber particles was proportioned with the size of rubber particles. The concentrations of NR and SBR rubber were 0.23 $\mug/m^3$ and 1.31 $\mug/m^3$, respectively, in the atmospheric dusts which were collected from the street in front of Yonsei University on April 1986. The ratio of tire tread rubber in the atmospheric dusts was about 0.63%.

• Macromolecular Research
• /
• 제8권6호
• /
• pp.268-275
• /
• 2000

After imposing a large pre-strain, anisotropy increases with increasing residual extension ratio. Gums have very low residual extension ratio and exhibit little anisotropy, while black filled SBR and especially sulfur-cured carbon black filled NR have large set and anisotropy. For carbon black filled rubber, samples subjected to tensile loading in perpendicular to the pre-strain direction have the same stress-strain curves shape as the sample without pre-strain (=isotropic samples), but slightly lower modulus. However, compared to isotropic or perpendicular directional samples to pre-strain direction, samples subjected to tensile loading in parallel to the pre-strain direction show low stress at low deformation, but have high stiffness at high deformation. Normalized anisotropy changes with strain. The normalized anisotropy for various deformations is a linear function of residual extension ratio.

• Elastomers and Composites
• /
• 제23권4호
• /
• pp.299-307
• /
• 1988

The mono-, di- and polysulfidic concentrations of the carbon black filled NR and SBR vucanizates which have different cure systems were determined. The n-decane was used as a swelling solvent. The propane-2-thiol and hexane thiol were used as specific chemical probes to cleavage the chemical crosslinks such as di- and polysulfide. In order to understand the effect of crosslink structure on the physical properties of vulcanizates, the tensile properties, fatigue failure, heat build up, compression set and viscoelastic properties were measured. From the results, the significant relationships between crosslink sturctures and physical properties, especially a gins resistance were obtained. Therefore, the better performances of the product can be satisfied by using the interpretations and approaches in this study.

• Elastomers and Composites
• /
• 제17권1호
• /
• pp.13-21
• /
• 1982

The purpose of this dissertation is to compare bound andtioxidant, MHPPD with the ordinary one, IPPD, when high polymers are used like NR and SBR. The effect of rubber bound antioxidant and ordinary antioxidant on the Mooney scorch time has been studied by means of the Mooney viscometer. The ageing properties of vulcanizates containing rubber-bound antioxidant and ordinary antioxidant have been studied in terms of hardness, tensile strength and elongation. The results of the Mooney scorch time and ageing properties are as follows: When MHPPD was mixed with NR or SBR compounds, the Mooney scorch time was faster than the IPPD compounds. Also the ageing properties of the vulcanizates containing MHPPD were much superior to the IPPD compounds. Furthermore, the vulcanizates comporised of MHPPD have taken andvantage of and resistance in the ozone test.

• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.1023-1030
• /
• 2001

The tensile properties of short nylon6 fiber reinforced NR and SBR have been investigated as functions of diameter ratio(DR), interphase condition, fiber aspect ratio(AR), and fiber content. The short-fiber(DR=3 and AR=2) reinforced SBR did not show the dilution effect for all interphase conditions. And the short-fiber(DR=3 and AR=2) reinforced NR did not show the dilution effect except for the no-coating. The better interphase condition, the lower dilution effect at same DR. The tensile moduli are significantly improved due to fiber content and diameter ratio at same interphase condition. The pull-out force increased with the DR. The better interphase condition, the higher pull-out force at same DR. It is found that the DR and AR have an important effect on tensile properties.

• Elastomers and Composites
• /
• 제24권4호
• /
• pp.276-289
• /
• 1989

This study deals with both effects of inorganic fillers to vulcanized rubbers such as NR, CR, EPDM, NBR & SBR and inorganic characteristics of domestic fillers in comparision with hard clay produced in the USA. The results were as follows. 1. Main ingredient of domestic clay "Ha-dong clay" was Halloysite, "No-ha Island" was Pyrophyllite with $\alpha$-Quartz, and both of "Hard clay" & "Hwa-soon clay" were proved to be Kaolinite by XRD, DT-TGA and chemical analysis by XRF. 2. Tensile strength value of SBR compounded with these fillers, was Hard clay $146kg\;f/cm^2$, Kaolinite $123kg\;f/cm^2$, Pyrophyllite $82kg\;f/cm^2$, Halloysite $80kg\;f/cm^2$, precipitated $CaCO_3\;27kg\;f/cm^2$, and ground $CaCO_3$ was $21kg\;f/cm^2$. These results showed the increase of seven times according to filler species. 3. The physical properties of non-crystalline rubbers, such as SBR, NBR & EPDM, compared with NR & CR, have been considerably changed according to crystalline phase, particle size, shape and surface structure of fillers. Especially, tensile strength value in case of SBR & EPDM, was differentiated about 1.5 times by the particle size of fillers. 4. In SBR, physical properties of rubber compounded with Kaolinite which was surface treated with fatty acid and silane, almost approach to the value of hard clay. 5. Delayed cure time of Kaolinite and decrease of rubber properties by $CaCO_3$ can be improved by blending kaolinite & $CaCO_3$ in the ratio of 2:1.