• Journal of Adhesion and Interface
• /
• v.2 no.4
• /
• pp.32-38
• /
• 2001

Effects of the ratio of rubber composition on covulcanization and ozone resistance were studied in this study. Specimens used in this study were rubber compounds(specimen-A) blended with various ratio of NR, SBR, BR, IIR, and EPDM, unsaturated rubber compounds(specimen-B) with NR/BR/SBR, and saturated rubber compounds(specimen-C) with NR/IIR/EPDM. PAD adhesion specimen was prepared from vulcanizing specimen-A and B, and specimen-A and C, respectively. Using same adhesion specimen, peel strength was measured and tested ozone resistance. In specimen-A, peel strength was higher with increasing NR ratio for NR and BR contained blends. In other specimen-A containing NR and SBR, the peel strength was also increased with increasing SBR ratio. NR/BR/IIR/EPDM rubber compounds had also better adhesion property than NR/SBR/IIR/EPDM compounds. As more unsaturated rubber was blended, the peel strength was higher but ozone resistance was worse. Optimum ratio of unsaturated and saturated rubbers for the peel strength and ozone resistance was 60/40.

• Elastomers and Composites
• /
• v.35 no.3
• /
• pp.215-226
• /
• 2000

Cure characteristics of carbon black-filled rubber compounds with different rubber composition were studied using a rheometer. The carbon black-filled rubber compounds with single, binary, and ternary rubber compositions of natural rubber (NR), styrene-butadiene rubber (SBR), and butadiene rubber (BR) were used. Delta-torques of the NR/BR- and SBR/BR-based compounds with a high BR content were higher than those of the single rubber-based compounds. For ternary rubber-based compounds, the delta-torques of the compounds were lower when the difference in the rubber content ratios was small than when it was big. Scorch and optimum cure times of the rubber compounds became shorter by increasing the content of NR in the compounds while those became longer by increasing the SBR content. Cure rates of the rubber compounds increased with a decrease of the SBR content in the rubber compounds. Reversion ratios decreased with an increase of the SBR content in the rubber compounds.

• Korean Journal of Food Science and Technology
• /
• v.44 no.6
• /
• pp.722-727
• /
• 2012

In order to improve the physical properties of brown rice by hydration and cooking, the amount of water absorption, hardness, reducing sugar, and minerals were measured for rice (NR), brown rice (NBR), and scratched brown rice (SBR). The amounts of water absorption were present in the order of NBR<0.07 SBR<0.20 SBR=NR after 210 min. The moisture contents of gelatinization rice were significantly different by degree of milling and scratch. The hardness of gelatinization rice were present in the order of NR<0.20 SBR<0.07 SBR

• Elastomers and Composites
• /
• v.7 no.2
• /
• pp.183-192
• /
• 1972

As a series of tile studies of EPDM-Polymer blends, tile experiment are concentrated to the investigation of the physical properties of tile EPDM-NR-SBR blends. The results are shown as follows: 1. In blending, tensile strength decreased with increase in EPDM contents, especially the ratio of EPDM/NR-SBR is 75/25. 2. Elongation and tear strength were much influenced by blending, especially the ratio of EPDM/NR-SBR is 50/50. 3. Ozone resistance is much improved after blending. It was effective more than tile ratio of EPDM/NR-SBR is 25/75. 4. Aging resistance is much improved after blending. It was effective more than the ratio of EPDM/NR-SBR is 50/50. 5. Hardness increased with increase in EPDM contents and on the other hand, abrasion resistance decreased.

• Elastomers and Composites
• /
• v.42 no.3
• /
• pp.143-150
• /
• 2007

Hardness of rubbery materials, which is important for dimensional stability and product performance, was investigated upon temperature change in this study. A newly developed IRHD (International Rubber Hardness Degree) tester was used to measure the hardness changes of NR and SBR specimens at various temperatures and the hardness values were compared with the Young's modulus. The harness and Young's modulus of NR and SBR showed an abrupt change near the glass transition temperatures. The hardness and Young's modulus were increased by increasing temperature due to the increased random chain conformation of molecules. The effect of temperature on hardness and Young's modulus of NR and SBR specimens filled with carbon black and silica was decreased by increasing filler content.

• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.201-208
• /
• 2007

In this study, the thermal shrinkage and expansion stresses of filled NR and SBR vulcanizates were measured to investigate the dimensional stability at an elevated temperature. When a rubber sample was held at constant pre-strain, a thermal stress developed upon heating due to the entropic consideration. The peak shrinkage stress of carbon black or silica filled NR decreased with increasing filler content. In SBR compounds, however, the peak shrinkage stress of SBR with 30 phr filler content was higher than that of unfilled compounds. The expansion stress of carbon black filled NR was changed little, but that of filled SBR increased with increasing the filler content. The peak expansion stress of silica filled NR and SBR vulcanizates increased with increasing silica content.

• Elastomers and Composites
• /
• v.33 no.4
• /
• pp.281-289
• /
• 1998

Tensile properties including Young's modulus and tear strength were measured for four different rubber compounds; natural rubber(NR), styrene-butadiene copolymer(SBR), ethylene-propylene diene monomer (EPDM), and brominated isobutylene-p-methyl-styrene copolymer(BIMS) as a function of temperature and degree of cure. To see the effect of over cure, a measurement was made of the tensile strength and swelling behavior of the over-cured rubber compounds. Young's modulus, E, was found to have linear dependency on the degree of cure for all rubber compounds. EPDM and BIMS showed the highest and lowest slopes, respectively. The slope of NR and SBR lay between EPDM and BIMS. Tear strength, Gc, decreased in the order of NR>BIMS>SBR>EPDM. As the cure time was extended the degree of cure of NR and SBR decreased, while that of BIMS increased. EPDM showed little change in the degree of cure.

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.442-446
• /
• 2009

Recovery behaviors of unfilled NR, BR, and SBR vulcanizates after aging with a circular deformation were compared to prevent the influence of reinforcing agent. Samples were aged at room temperature, 50, 70, and $90^{\circ}C$ for 10 days. Recovery increased by increasing the measurement time. Instantaneous recoveries less than 1.0 sec were obtained using the recovery variations with the measurement time. For aging at room temperature, difference in the recoveries of the rubber samples was not significant because the aging time was too short. However, for accelerated thermal aging at 50, 70, and $90^{\circ}C$, difference in the recoveries of the rubber samples was significant. Degree of recovery of BR specimen was higher than those of the others, while that of SBR was lowest. However, for accelerated thermal aging at $90^{\circ}C$, recovery of the NR sample was higher than that of the BR one. The initial recovery decreased by increasing the aging temperature and the decrement of SBR was larger than the others. The experimental results were explained with the resilience properties of rubbers and the crosslink density changes by thermal aging.

• Elastomers and Composites
• /
• v.39 no.4
• /
• pp.263-273
• /
• 2004

The effects of zinc surfactant (ZB) on the bis(triethoxysilylpropyl)disulfide (TESPD)-silica mixture in natural rubber (NR) and solution butadiene-co-styrene rubber(S-SBR) were compared with respect to their rheological property, processability, physical properties, and silica dispersion. In the NR compound, addition of the ZB increased the reversion resistance time (T-2), the tensile modulus, and the BO time; however, lowered the viscosity, the HBU, and tans values. In the S-SBR copound, addition of the ZB increased the $tan{\delta}$ values while lowered the T-2, the tensile modulus the BO time, the viscosity, and the HBU of the compound. In the NR compounds, addition of the ZB significantly increased the processability and mechanical property. However, in the S-SBR compounds, it improved the processability the mechanical property was not improved.

• Elastomers and Composites
• /
• v.57 no.4
• /
• pp.188-196
• /
• 2022

Styrene-butadiene rubber(SBR) is a copolymer of styrene and butadiene. It is composed of 1,2-unit, 1,4-unit, and styrene, and its properties are dependent on its microstructure. In general, rubber composites contain a single rubber or a blended rubber. Similarly, SBR is used by mixing with natural rubber(NR) and butadiene rubber(BR). The composition of a rubber article affects its physical and chemical properties. Herein, an analytical method for determining the microstructure of SBR using via pyrolysis is introduced. Pyrolysis-gas chromatography/mass spectrometry is widely used to analyze the microstructure of polymeric materials. The microstructure of SBR can be determined by analyzing the principal pyrolysis products formed from SBR, such as 4-vinylcyclohexene, styrene, 2-phenylpropene, 3-phenylcyclopentene, and 4-phenylcyclohexene. An analytical method for determining the composition of SBR/NR, SBR/BR, and SBR/NR/BR blends via pyrolysis is introduced. The composition of blended rubber can be determined by analyzing the principal pyrolysis products formed from each rubber component.