• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.93-100
• /
• 2002

For natural gas and LPG fuel, measurements on the concentrations of individual exhaust hydrocarbon species have been made as a function of air-fuel ratio in a 2-liter four-cylinder engine using a gas chromatography. NMHC in addition to the species of HC, other emissions such as CO$_2$, CO and NOx were examined for natural gas and LPG at 1800rpm far two compression ratios (8.6 and 10.6). Fuel conversion efficiencies were also investigated together with emissions to study the effect of engine parameters on the combustion performances in gas engines especially under the lean bum conditions. It was found that CO$_2$ emission decreased with smaller C value of fuel, leaner mixture strength and the higher compression ratio. HC emissions from LPG engine consisted primarily of propane (larger 60%), ethylene and propylene, while main emissions from natural gas were mothane (larger than 60%), ethane, ethylene and propane on the average. The natural gas was proved to give the less ozone formation than LPG fuel. This was accomplished by reducing the emissions of propylene, which has relatively high MIR factor, and propane that originally has large portion of LPG. In addition, natural gas shows a benefit in other emissions (i.e. NMHC,NOx, CO$_2$and CO), SR and BSR values except fuel conversion efficiency.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1421-1432
• /
• 2018

Water soluble oil was obtained from the pyrolysis of coconut waste as a biomass at $600^{\circ}C$. It was studied that the combustion characteristics of bio-emulsion fuel by mixing and emulsifying 15~20% of water soluble oil which obtained from pyrolysis of coconut waste as a biomass and MDO(marine diesel oil) as a marine fuel. Engine dynamometer was used for detecting emissions, temperature, and power. The temperature of combustion chamber was decreased because the moisture in bio-emulsion fuel deprived of heat of evaporation in combustion chamber. While combustion, micro-explosion took place in the combustion chamber by water in the bio-emulsion fuel, MDO fuel scattered to micro particles and it caused to smoke reduction. The temperature reduction of combustion chamber by using bio-emulsion fuel reduced the NOx emission. The increasing of bio-oil content caused increasing water content in bio-emulsion fuel so total calorific value was reduced. So the characteristics of power was decreased in proportion to using the increasing amount of bio-emulsion fuel. Heavy oil as a marine fuel exhausts a lot of smoke and NOx. We expect that we can reduce the exhaust gas of marine engine such as smoke and NOx by using of bio-emulsion fuel as a marine fuel.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.3
• /
• pp.232-237
• /
• 2009

$Ag/Al_2O_3$ 촉매하에 디젤 엔진에서 배출되는 NOx를 정화하기 위하여, 수소가 풍부한 바이오디젤을 환원제로 사용하였다. Ag 전구체 함침과정에서 촉매기공이 부분적으로 폐쇄되는 것을 BET 실험을 통하여 관찰하였다. 2% $Ag/Al_2O_3$ 촉매의 형상과 조성은 산처리 과정을 거치더라도 변화하지 않는 것을 SEM과 EDXS 분석으로부터 확인하였다. $Ag/Al_2O_3$ 촉매 표면에서 생성되는 -NCO 와 -CN을 in-Situ DRIFT 방법을 사용하여 관찰하여 HC-SCR에서의 NOx 제거 반응구조를 확인하였다.

• Journal of Power System Engineering
• /
• v.20 no.1
• /
• pp.18-23
• /
• 2016

As diesel engines have high power and good fuel economy on top of less $CO_2$ emissions, their market shares are increasing not only in commercial vehicles but also in passenger cars. LNT, urea-SCR and combination of them have been developed for after-treatment of the exhaust gas to reduce NOx on diesel vehicles. The aim of this study is to investigate the $NH_3$ generation characteristics of LNT catalyst downstream. It was found from the experiments of the LNT catalyst that $H_2$ was useful as a reductant in SCR catalyst because it can enhance the de-NOx performance and improve $NH_3$ selectivity. The $NH_3$ generation of the LNT, when hydrothermally aged at $900^{\circ}C$ for 18 hr, increased to about 90ppm at $300^{\circ}C$ due to Pt sintering and Ba agglomeration. LNT catalyst was most sulfur poisoning at $500^{\circ}C$. The $NH_3$ slip increased due to the reduction of residence time according to SV increase.

• Resources Recycling
• /
• v.29 no.1
• /
• pp.62-69
• /
• 2020

Manufacturing processes in industrial complexes produce NOx, SOx, VOCs, which cause particulate matter (PM). Therefore, this study analyzed the characteristics of each industrial complex by using scattered public data, matched the existing particulate matter(PM) reduction technology, and proposed an optimized reduction plan. The application of matching technologies and facilities by industrial complexes based on data is able to mitigate NOx, SOx, and VOCs which cause particulate matter in the process in advance. This way can be an effective alternative in order to reduce PM in the manufacturing processes as well as industrial complexes.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.150-158
• /
• 1999

본 연구는 저온플라즈마를 이용하여 배기가스중의 SOx와 NOx를 동시에 처리하는 공정을 개발하는 것으로서, 최적의 반응제 선정과 효율적인 공정의 구성을 위해 SOx, NOx와 반응제와 반응기구를 밝히고자 하였다. 실험은 1.0 N㎥/h의 모사가스를 이용한 기초실험과 20 N㎥/h의 실제 연소가스를 이용한 실험으로 진행되었으며, 반응제로는 NH3와 파리핀계 및 올레핀계 탄화수소를 사용하였다. NH3를 반응제로 한 SO2 제거반응은 비플라즈마 조건에서는 NH4HSO3, 플라즈마 조건에서는 (NH4)2SO4의 생성반응이었고, 두 조건 모두 높은 제거율을 나타냈다. 반응제를 사용하지 않은 플라즈마 조건에서 SO2는 환원반응이 일어나고 O2 농도의 증가는 역반응을 증가시키는 화학평형에 의해 SO2의 제거율이 감소되었다. 플라즈마 조건에서 NO는 O2농도가 낮은 경우는 NO의 환원반응이 주로 일어나고, O2 농도가 높을 경우는 산화반응이 지배적이었다. 올레핀계 탄화수소는 플라즈마 조건에서 NO 산화 반응에 탁월한 효과를 보였을 뿐만 아니라 SO2 제거에도 효과를 보여 최대 40%의 제거율을 나타냈으며, NH3의 사용을 줄일 수 있음을 확인하였다.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.576-580
• /
• 2017

In the present paper, the thermal deactivation characteristics of plate-type commercial $V_2O_5-WO_3/TiO_2$ SCR catalyst were investigated. For this purpose, the plate-type catalyst was calcined at different temperatures ranging from $500^{\circ}C$ to $800^{\circ}C$ for 3 hours. Structural and morphological changes were characterized byXRD, specific surface area, porosity, SEM-EDS and also NOx conversion with ammonia according to the calcine temperature. The NOx conversion decreased with increasing calcine temperature, especially when the catalysts were calcined at temperatures above $700^{\circ}C$. This is because the crystal phase of $TiO_2$ changed from anatase to rutile, and the $TiO_2$ grain growth and $CaWO_4$ crystal phase were formed, which reduced the specific surface area and pore volume. In addition, $V_2O_5$, which is a catalytically active material, was sublimated or vaporized over $700^{\circ}C$, and a metal mesh used as a support of the catalyst occurred intergranular corrosion and oxidation due to the formation of Cr carbide.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.394-396
• /
• 2008

주요 온실가스인 이산화탄소를 회수 및 저장(Carbon Capture and Storage)하는 기술은 주로 적은 $CO_2$농도를 가지는 연소후 포집공정이 개발 및 적용되었으나, 최근에는 보다 적극적으로 이산화탄소를 분리하기 위하여 연소전 석탄가스화복합발전(IGCC)과 같은 공정에 적용하여 반응공정 중에 생성되는 높은 농도의 $CO_2$를 분리하는 공정이 선진국을 중심으로 활발히 연구가 진행되고 있다. 본 연구에서는 고압의 연소전 조건에서 아민계보다 흡수속도는 느리나 생성가스에 유입되는 $O_2$, SOx, NOx에 의한 부반응 현상, 휘발에 의한 손실, 열적 열화현상이 나타나지 않는 알칼리염계 흡수제의 $CO_2$ 흡수특성에 대하여 연구하였다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.87-88
• /
• 1999

최근 들어 서울을 중심으로 한 수도권 지역에서는 여름철 오존주의보 발령이 빈번해지면서 광화학 반응에 의한 대기중 오존농도 상승에 많은 관심을 보이고 있다. 휘발성 유기물질 (Volatile Organic Compounds)은 광화학 반응을 통해 오존을 생성시키는 대표적인 대기오염 물질로 알려져 있으며 주로 자동차, 석유정제, 석유화학, 도장산업 등에서 배출되는 것으로 알려져 있다. 이렇나 VOC는 $NO_x$와 함께 대기중 오존농도 저감을 위한 대상물질로써 NOx 배출량 규제와 동시에 VOC 농도 및 특성 또한 면밀히 검토되어야 한다.(중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.233-234
• /
• 2002

도시대기오염의 주요 배출원으로 알려진 자동차에서 배출되는 VOCs는 인체에 유해할 뿐만 아니라 대기 중에서 질소산화물(NOx)과 함에 광화학반응을 통한 오존 둥 2차 오염물질인 광화학산화물을 형성하는 전구물질로 작용하기 때문에 환경학적, 보건학적으로 매우 큰 영향을 미친다. 이러한 자동차 배출 VOCs가 오존생성에 미치는 영향에 대한 연구는 갈수록 증가하고 있는 대기중 오존 농도 심화현상의 규명과 대기질 개선을 위한 기초자료로서 매우 그 필요성이 더해가고 있다. (중략)