• 한국추진공학회지
• /
• 제6권2호
• /
• pp.29-36
• /
• 2002

두 번째 벤츄리 끝단 각도가 가스터빈 연소기의 유동 및 분무 특성에 미치는 영향을 이해하기 위해 스월 vane 형태의 2중 스월컵을 장착한 산업용 가스터빈 엔진에 대해 두 번째 벤츄리 끝단 각이 수렴형, 직선형, 발산형의 세 경우에 대해 실험을 수행하였다. 두 번째 벤츄리 끝단 각도의 변화가 가스터빈 연소기의 재순환 영역의 위치, 크기 및 형상 등의 유동 특성과 연료 액적 분무 형태를 크게 변화시킴을 확인 할 수 있었다. 발산형 벤츄리에서는 내부 재순환 영역이 점화가 일어나는 지점에서 가까운 곳에서 형성되므로 화염의 안정화에는 탁월할 것으로 판단되지만, 수렴형 벤츄리에서 가장 작고 균일한 크기의 액적들이 측정되었고, 내부 재순환 영역이 연소기 내에 길게 형성된 점으로 고효율, 저공해 연소기로는 수렴형 벤츄리의 경우가 적합하리라 판단된다.

• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.530-537
• /
• 2012

This work experimentally investigates that Diesel-DME blended fuel influences combustion characteristics and emissions (NOx, CO, HC, smoke) in a single-cylinder DI diesel engine. Diesel is used as a main fuel and DME is blended for the use of its quick evaporating characteristics. Diesel and DME are blended by the method of weight ratio. Weight ratios for Diesel and DME are 95:5 and 90:10 respectively and the both ratios have been used altogether in blended fuel. The experiments are conducted in this study single cylinder engine is equipped with common rail and injection pressure is 700 bar at 1200 rpm. The amount of injected fuels is adjusted to obtain the fixed input calorie value as 972.2 J/cycle in order to compare with the fuel conditions. DME is compressed to 15 bar by using nitrogen gas thus it can be maintained the liquid phase. In this study, different system compared others paper is common rail system, also there is combustion and emission about compared DME and diesel fuel. It is expected to be utilized about blended fuel.

• 한국환경과학회지
• /
• 제29권5호
• /
• pp.559-573
• /
• 2020

The purpose of this study analyzed the overview of corrugated cardboasrd manufacturing industry and then provide direction for improvement. The BREF (BAT reference document) is an important reference for licensees and officer, including the best available techniques for the industry and achievable environmental performance, technical characteristics, and economic information. In the corrugated cardboard manufacturing process, wastewater pollutants are generated throughout the production process, and water is used in the dissociation and aging process. Atmospheric emissions are mostly generated by steam production from boilers and incinerators for the dry process. SO₂, NOx, CO₂, CO, HCl, dust, VOC, and odor were common. In the EU-BREF (European union BAT reference documents) BAT for wastewater have taken up a relatively large proportion. Items of water pollutants in wastewater were common in COD, BOD, N, P, SS, and however EU-BREF had different pollutants such as AOX and salt compared to K-BREF. In order to improve the quality of the K-BREF, it is necessary to devise basic data research method and data acqusitiom method. Consideration should be given to additional environmental management techniques that reflect the emissions characteristics of the corrugated cardboard manufacturing process. In addition, further research is needed to develop methodologies for selecting BATs considering environmental and economic feasibility.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권6호
• /
• pp.264-273
• /
• 2006

In this paper, we propose a new architecture of Self-Organizing Fuzzy Polynomial Neural Networks (SOFPNN) by means of consecutive optimization and also discuss its comprehensive design methodology involving mechanisms of genetic optimization. The network is based on a structurally as well as parametrically optimized fuzzy polynomial neurons (FPNs) conducted with the aid of information granulation and genetic algorithms. In structurally identification of FPN, the design procedure applied in the construction of each layer of a SOFPNN deals with its structural optimization involving the selection of preferred nodes (or FPNs) with specific local characteristics and addresses specific aspects of parametric optimization. In addition, the fuzzy rules used in the networks exploit the notion of information granules defined over system's variables and formed through the process of information granulation. That is, we determine the initial location (apexes) of membership functions and initial values of polynomial function being used in the premised and consequence part of the fuzzy rules respectively. This granulation is realized with the aid of the hard c-menas clustering method (HCM). For the parametric identification, we obtained the effective model that the axes of MFs are identified by GA to reflect characteristic of given data. Especially, the genetically dynamic search method is introduced in the identification of parameter. It helps lead to rapidly optimal convergence over a limited region or a boundary condition. To evaluate the performance of the proposed model, the model is experimented with using two time series data(gas furnace process, nonlinear system data, and NOx process data).

• 한국해양공학회지
• /
• 제32권5호
• /
• pp.380-385
• /
• 2018

With the tightening of environmental regulations (i.e., IMO Tier III), natural gas (NG) has been spotlighted as an eco-friendly fuel with few air pollutants other than nitrogen oxides (NOx) and sulfur oxides (SOx). For reasons of economic efficiency, it is mainly stored and transported in a liquid state at $-163^{\circ}C$, which is a cryogenic temperature, using a liquefied gas storage tank. Accordingly, it is necessary to reduce the boil-off gas (BOG) occurrence due to the heat flow according to the temperature difference between the inside and outside of the storage tank. Therefore, in this study, a BOG measurement test on an independent-type storage tank made up of SUS304L was carried out. The test results showed the tendency for BOG occurrence according to the temperature under different filling ratios.

• 한국가스학회지
• /
• 제12권3호
• /
• pp.7-12
• /
• 2008

본 연구에서는 DME가 함유된 LPG 연료를 불꽃 점화 기관에서 적용 가능 여부를 실험적으로 살펴보고 있다. LPG와 DME가 함유된 혼합연료로 엔진 구동시 엔진출력, 배출가스 특성, 연소안정성 등의 항목에 대한 실험을 $1200{\sim}5200\;rpm$에서 수행하였다. 결과를 살펴보면 20% 내외의 범위에서 DME를 혼합하는 경우 안정된 연소성능을 얻을 수 있었으며 10%까지는 엔진 출력 저하가 거의 없다. 하지만 혼합율이 증가할수록 DME 연료는 LPG보다 에너지 밀도가 낮으므로 출력이 감소하고 제동연료소비율은 증가하는 현상을 보인다. LPG/DME 혼합연료는 향후 DME 시장을 넓혀 나가는 최선의 방법이 될 것이다.

• 한국산학기술학회논문지
• /
• 제16권11호
• /
• pp.7433-7438
• /
• 2015

암모니아를 환원제로 사용하는 선택적 촉매 환원법에서 $V_2O_5/TiO_2$ 촉매를 사용하여 황산화물에 대한 비활성화 특성을 연구하였다. 반응온도와 황산화물 농도를 변경시키면서 촉매의 활성변화를 측정하였다. 촉매의 활성은 황산화물의 농도와 반응시간이 증가할수록 감소하였다. 또한 황산화물에 대한 촉매의 활성감소 정도는 반응온도 $250{\sim}300^{\circ}C$의 범위에서 반응온도가 증가할수록 크게 감소하였다. BET, XRD, SEM, TPD분석을 통해 비활성화된 촉매의 물리화학적인 특성을 조사하였다. 분석결과, 비활성화현상은 황산화물이 존재하는 상태에서 미반응 암모니아, 수분 등이 반응하여 황산암모늄이 생성되기 때문이다. 황산암모늄은 촉매의 기공을 막으며 활성물질에 침적된다.

• 환경영향평가
• /
• 제11권1호
• /
• pp.25-36
• /
• 2002

The purpose of this study is to assess the environmental carrying capacity of Chongju City for the environmental management and the urban growth management. The urban environmental carrying capacity assessment of the city by the index of ecological footprint(EF), shows that the ecosystem of the city has been overloaded and most of the deficiencies has come from outside of the city. The EF index, the area of land per capita required for production and consumption in the city, was 1.731 ha per capita in 1989 and 1.901 ha per capita in 1999. On the other side, the ecologically productive land is 0.0175 ha per capita. It means that every citizen owes 1.88 ha per capita to the ecosystem in 1999. The land consumption of the city has increased by 0.1705 ha per capita during the last 10 years. The capacity of infrastructure and the service supply estimated by the Onishi model does not exceed the demand of the city in 1999. But the rapidly increasing population and fast urban growth need the expansion of the capacity. The water supply capacity of the city appears to be sufficient in 1999, but the water supply demand will increase in the future. The capacity of sewage treatment facilities seems to be sufficient, but the higher level of sewage treatment facilities should be adopted for the improvement of water quality as the generation of sewage will increase and its characteristics will also make the wastewater treatment difficult. Due to the decrease of solid waste generated, the land fill capacity for solid waste disposal is not insufficient at present, but the capacity will be saturated in the near future. Therefore, the scientific management system of solid wastes should be introduced. The air quality of the city meets both the national air quality standard and WHO recommendation standard, but the strong regulation and control of automobile emission gas such as CO, $CO_2$, NOx and HC is required for clean air.

• 한국연소학회지
• /
• 제18권2호
• /
• pp.32-41
• /
• 2013

This study presents both experimental and numerical investigation of ignition delay time of n-heptane and n-butanol binary fuel. The $O_2$ concentration in the mixture was set to 9-10% to make high exhaust gas recirculation( EGR) rate condition which leads low NOx and soot emission. Experiments were performed using a rapid compression machine(RCM) at compressed pressure 20bar, several compressed temperature and three equivalence ratios(0.4, 1.0, 1.5). In addition, a numerical study on the ignition delay time was performed using CHEMKIN codes to validate experimental results and predict chemical species in the combustion process. The results showed that the ignition delay time increased with increasing the n-butanol fraction due to a decrease of oxidation of n-heptane at the low temperature. Moreover, all of the binary fuel mixtures showed the combustion characteristics of n-heptane such as cool flame mode at low temperature and negative-temperature-coefficient(NTC) behavior. Due to the effect of high EGR rate condition, the operating region is reduced at lean condition and the ignition delay time sharply increased compared with no EGR condition.

• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.32-38
• /
• 2006

Currently, due to the serious world-wide air pollution by substances emitted from vehicles, emission control is enforced more firmly and it is expected that the regulation requirements for emission will become more severe. A new concept combustion technology that can reduce the NOx and PM in relation to combustion is urgently required. Due to such social requirement, technologically advanced countries are making efforts to develop an environment-friendly vehicle engine at the nation-wide level in order to respond to the reinforced emission control. As a core combustion technology among new combustion technologies for the next generation engine, the homogenous charge compression ignition(HCCI) is expanding its application range by adopting multiple combustion mode, catalyst, direct fuel injection and partially premixed combustion. This study used a 2-staged injection method in order to apply the HCCI combustion method without significantly altering engine specifications in the aspect of multiple combustion mode and practicality by referring to the results of studies on the HCCI engine. In addition, this study confirmed the possibility of securing optimum fuel economy emission reduction in the IMEP 8bar range(which could not be achieved with existing partially premixed combustion) through forced charging, exhaust gas recirculation(EGR), compression ratio change and application of DOC catalyst.