• Journal of Oral Medicine and Pain
• /
• v.20 no.2
• /
• pp.497-513
• /
• 1995

Human genomic Deoxyribonucleic acid(DNA) was extracted from teeth by boiling, salting-out, phenol, boiling-phenol methods. The author compared DNA concentration and its purity, the accuracy of sex determination and the results of the D1S80 locus detection among above 4 methods. The following results were obtained : 1. DNA concentration was the highest in pulp with salting-out method and DNA purity was higher in pulp with salting-out and phenol methods than other 2 methods. 2. Sex determination was possible using of the pulp and the dentin of the teeth with four methods but, it was impossible in the enamel and some pulp with boiling method. 3. Amplification of D1S80 locus occurred from pulp and dentin with salting-out, phenol, and boiling-phenol methods. 4. There are no differences among the amplification of X-Y homologus amelogenin gene by application of 4 methods and salting-out, phenol methods efficiently makes available to amplification of D1S80 locus. From the investigation DNA extraction, sex determination, amplification of D1S80 locus was successfully accomplished with salting-out, phenol, boiling-phenol methods Therefore above 3 methods are available and applicable as forensic odontology for individual identification.

• Steel and Composite Structures
• /
• v.16 no.1
• /
• pp.45-58
• /
• 2014

EC3 provides several methodologies for the stability verification of members and frames. However, when dealing with the verification of non-uniform members in general, with tapered cross-section, irregular distribution of restraints, non-linear axis, castellated, etc., several difficulties are noted. Because there are yet no guidelines to overcome any of these issues, safety verification is conservative. In recent research from the authors of this paper, an Ayrton-Perry based procedure was proposed for the flexural buckling verification of web-tapered columns. However, in order to apply this procedure, Linear Buckling Analysis (LBA) of the tapered column must be performed for determination of the critical load. Because tapered members should lead to efficient structural solutions, it is therefore of major importance to provide simple and accurate formula for determination of the critical axial force of tapered columns. In this paper, firstly, the fourth order differential equation for non-uniform columns is derived. For the particular case of simply supported web-tapered columns subject to in-plane buckling, the Rayleigh-Ritz method is applied. Finally, and followed by a numerical parametric study, a formula for determination of the critical axial force of simply supported linearly web-tapered columns buckling in plane is proposed leading to differences up to 8% relatively to the LBA model.

• The Korean Society of Law and Medicine
• /
• v.15 no.1
• /
• pp.303-333
• /
• 2014

The right to self-determination in regard to one's body is a key element of human dignity, privacy and freedom. It is constitutionally enshrined in the guarantee of human dignity, in the general right of personality and, most concretely of all, in the right to physical integrity. In principle No-one may trespass another person's body against his will, whether this act improves his physical condition or not. This right of self-determination applies equally to healthy and to sick people. Hence everyone has the right either to permit or to refuse a medical treatment, unless he can not make a rational decision. If the person does not consent himself, for whatever reason, another one must do for him as guardian. Representation in consent to medical treatment is therefore the exception of self-determination rule. This article explored, 1. who can consent to the medical treatment in the case of the mentally incapacitated adult and the infant, 2. what kind of consent to the medical treatment can the deputy determinate for the mentally incapacitated adult and the infant, 3. when the deputy can not determinate without permission of the court, and 4. what can the doctor do in the case of conflict between minors and guardians.

• The Journal of the Korean dental association
• /
• v.55 no.1
• /
• pp.42-52
• /
• 2017

The purpose of this study is to evaluate the preferred method of root canal length determination and the apical limit for canal instrumentation among endodontic teachers of dental school. A questionnaire on the preferred method of root canal length determination and the apical limit for canal instrumentation was designed and distributed to endodontic teachers of various dental schools. The response rate was 90%. The most preferred method of root canal length determination was Electronic apex locator (EAL)(89%). The most favoured apical limit for canal instrumentation was 0.5 to 1.0 mm short of the radiographic apex(78%). The most preferred method of using EAL was that the working length is taken at 'APEX' mark and then distracted 0.5mm from that length.(41%). When there is no agreement between radiographic measurement and EAL measurement, 74% of respondents chose the length of EAL measurement. The majority of endodontic teachers from Korean dental schools preferred EAL to radiograph method in determining root canal length.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.9
• /
• pp.1324-1328
• /
• 2003

The simultaneous determination of anions ($SO_4 ^{2-},\;Cl^-,\;and\;NO_3^-$) and cations ($Na^+,\;NH^{4+},\;K^+,\;Mg^{2+},\;and\;Ca^{2+}$) in natural water obtained by Nakdong River waters system in Korea were performed by ion-exclusion/cationexchange chromatography with conductimetric detection. The stationary phase was a polymethacrylate-based weakly acidic cation-exchange resin column in the $H^+$-form and a weak-acid eluent. When using only a 1.4 mM sulfosalicylic acid/6 mM 18-crown-6 ether as an eluent, good resolution of both anions and cations, minimum time required for the separation, and satisfactory detection sensitivity were obtained in a reasonable time. The method was successfully applied to the simultaneous determination of anions and cations in natural waters.

• Journal of Ecology and Environment
• /
• v.30 no.2
• /
• pp.195-199
• /
• 2007

Statistical tools for determining sex in the sexually monomorphic black-billed magpie based on morphological characters have been developed based on studies of European and North American populations. However, since no morphological method has been developed for black-billed magpies in Korea, it has been difficult to conduct field studies that require information about the sex of individuals. We present two discriminant equations for determining sex of second-year (SY) and after-second-year (ASY) magpies in north- and midwestern part of South Korea. Based on morphological measurements on 105 SY (56 females, 49 males) and 72 ASY (36 females, 36 males) individuals, we found body mass, wing chord, and head length to be the most useful features for morphological sex determination. The accuracy of our method was 86.5% for SYs and 93.1% for ASYs, which is similar to values reported previously from American and European magpies. Since the equations contain morphological traits which are only minimally susceptible to seasonal variation and measurement errors, our discriminant equations should be both useful and robust for sex determination on black-billed magpies in the northern and mid-western regions of South Korea.

• Analytical Science and Technology
• /
• v.32 no.3
• /
• pp.88-95
• /
• 2019

This study was conducted to establish the analytical method for the determination of cyanide in blood, urine, lung and skin tissues in rats. In order to detect or quantify the sodium cyanide in above biological matrixes, it was derivatized to Pentafluorobenzyl cyanide (PFB-CN) using pentafluorobenzyl bromide (PFB-Br) and then reaction substance was analyzed using gas chromatography mass spectrometer (GC/MS)-SIM (selected ion monitoring) mode. The analytical method for cyanide determination was validated with respect to parameters such as selectivity, system suitability, linearity, accuracy and precision. No interference peak was observed for the determination of cyanide in blank samples, zero samples and lower limit of quantification (LLOQ) samples. The lowest limit detection (LOD) for cyanide was $10{\mu}M$. The linear dynamic range was from 10 to $200{\mu}M$ for cyanide with correlation coefficients higher than 0.99. For quality control samples at four different concentrations including LLOQ that were analyzed in quintuplicate, on six separate occasions, the accuracy and precision range from -14.1 % to 14.5% and 2.7 % to 18.3 %, respectively. The GC/MS-based method of analysis established in this study could be applied to the toxicokinetic study of cyanide on biological matrix substrates such as blood, urine, lung and skin tissues.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.3
• /
• pp.171-178
• /
• 2013

BACKGROUND: Consensus of heavy metal phytoavailability in soils needs to be introduced for soil management protocols in relation to safer food production in the contaminated agricultural soils. For this, setting up the method for evaluation of metal phytoavailability in soil is an essential prerequisite. METHODS AND RESULTS: The current study was carried to select a proper single extraction method for determination of phytoavailable metal concentration in soil. Two extraction methods were examined including 1 M $NH_4NO_3$ extraction and 0.01 M $Ca(NO_3)_2$ extraction methods using 142 soil samples collected from the agricultural soils nearby abandoned mining area in Korea. Corelation analysis was conducted between phytoavailable metal concentrations and soil properties potentially influencing on the metal phytoavailability. Both methods showed similar significance (p<0.001) in correlation with soil properties such as soil pH. However, higher correlation coefficients between phytoavailable metal concentrations and soil properties were observed when used $Ca(NO_3)_2$ extraction rather than using $NH_4NO_3$ extraction. CONCLUSION(S): It appeared that 0.01 M $Ca(NO_3)_2$ extraction was better option for determination of phytoavailable metals in soils and further study to test the efficiency of this method is required in combination with plant uptake.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.358-363
• /
• 2010

This paper proposes a step-by-step method of determining the parameters of equivalent circuit which is considered the no load losses for the single phase induction motor which has the starting winding. This method is comprised of three steps, and the stator resistance which is measured by the method of voltage drop is treated as constant and the stator and the rotor leakage reactances are assumed to be the same in every step. The test results of no load and locked rotor test are used in the 1st and 2nd step, and the ratings of name plate of the motor are needed in the 3rd step. In the 1st step, the traditional equivalent circuit parameters are directly calculated by no load and locked rotor conditions. In the next step, five nonlinear simultaneous equations for five unknown parameters can be set up by no load and locked rotor equivalent circuits. These equations are solved by using the initial parameters obtained by the 1st step parameters. In the final step, three nonlinear simultaneous equations for rotor winding resistance, leakage reactance and no load losses component resistance can be set up by equivalent circuit under the rated operation. Three parameters are solved by using the 2nd step parameters. Thus, equivalent circuit parameters are gradually refined step by step. The validity of the proposed method is evaluated by comparing the computed values obtained by the equivalent circuit parameters with the experimental values of the load test.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1438-1442
• /
• 2003

A method for the determination of nitrogen in ruminant feedstuffs, products and excreta (e.g. milk and urine) using a spectrophotometer is developed, where samples processed for P determination are also used to determine N. Samples are digested with sulphuric acid and subsequently with hydrogen peroxide in Kjeldahl tubes. Digested solutions along with phenol and buffered alkaline hypochlorite reagents are incubated in a water bath at $37^{\circ}C$ for 30 min and presented in the spectrophotometer. The spectrophotometer set at 625 nm measures the concentration of N of each sample. Nitrogen in 261 of the samples was also determined by the classical Kjeldahl method in order to develop a relationship between N determined by the Kjeldahl method (Y) and the colorimetric method (X). The mean value of Y was as high as that of X (0.92 vs. 0.96; p>0.05). The colorimetric method predicted Kjeldahl N highly significantly (Y=0.985X-0.024, $R^2=0.993$, p<0.001; or more simply Y=0.974X, $R^2=0.993$, p<0.001). An analysis of regression found no difference (p>0.05; both t-test and F-test) between colorimetric (0.96% N) and adjusted (0.96% N) N. In comparison with the Kjeldahl method, the analytical capacity of N by colorimetric method increases greatly, where 200-300 determinations of N are possible in a working day. In addition, the system provides an opportunity to use not only the same digested solution for both N and P determination of a particular sample, but also uses the same spectrophotometer to assay both N and P. Therefore, the system may be attractive in situations where both elements of a sample are to be determined. In conclusion, the speed of N determination, low cost, efficient use of labour, time and reagents, fewer items of equipment, and the reduction of environmental pollution by reducing effluent and toxic elements are the advantages of this method of N determination.