• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.658-663
• /
• 2018

Current measuring methods for air quality are based on ground measurement networks and satellite data. New methods of collecting evidence with advanced sensors are needed because current methods have limitations in collecting evidence for the illegal emission of air pollutants at narrow areas or specific sites. This study analyzed the possibility of using an ultraviolet hyperspectral sensor to measure the concentration of nitrogen dioxide and sulfur dioxide. Two types of spectra were used: simulated spectra for gases with various concentrations using a radiative transfer model and observed spectra for each gas for a concentration. To understand the possibility of using a hyperspectral sensor, the differences between the simulated spectra and the observed spectra were analyzed, and the variation of simulated spectra were then analyzed according to the concentration. The results showed good agreement between observed spectra and simulated spectra. In addition, the absorption depth at specific wavelengths in the simulated spectra had a very strong correlation with the gas concentration. The gas concentration could be estimated using the hyperspectral sensor. In the future, validation would be needed to estimate the gas concentration through observations of various concentrations of gases using a hyperspectral sensor.

• Journal of Korean Society of Forest Science
• /
• v.95 no.4
• /
• pp.405-414
• /
• 2006

Korea is expected to be included in the countries of compulsory reduction of greenhouse gas emissions from the 2nd commitment period (2013~2017). For the negotiations in the future, this study was designed to review the tendency of discussions about carbon account in harvested wood products (HWP), which is currently underway around the globe and approach-specific characteristics, and analyze effects on carbon emissions in our country. As a result, most importantly, except the current IPC default approach there is no big difference among the 3 approaches of carbon account in HWP, which were newly suggested on the basis importers because all the HWP circulated at home are accounted for by carbon-stock changes. Under production approach, those HWP produced at home only are evaluated according to carbon-stock changes with the exception of imported HWP. Atmospheric-flow approach is favorable to net wood exporters, because the spot where ultimate decomposition and combustion arising out of the use of HWP occur is regarded as the place of carbon emission. Meanwhile, the estimation of korean carbon-stock change in HWP showed that as of 2004, stock-change approach was 1.567 Tg C, with production approach being 0.581 Tg C and atmospheric-flow approach being -1.425 Tg C, which means stock-change approach is most favorable to Korea as a net wood importer, while atmospheric-flow approach is the least favorable one, in terms of carbon emissions reduction in Korea.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.24
• /
• pp.10899-10903
• /
• 2015

Background: In this study, we aimed to investigate the benefits of 18F-deoxyglucose positron emission tomography/computed tomography (FGD-PET/CT) imaging for staging and radiotherapy planning in patients with head and neck cancer undergoing definitive radiotherapy. Materials and Methods: Thirty-seven head and neck cancer patients who had undergone definitive radiotherapy and PET/CT at the Uludag University Medical Faculty Department of Radiation Oncology were investigated in order to determine the role of PET/CT in staging and radiotherapy planning. Results: The median age of this patient group of 32 males and 5 females was 57 years (13-84years). The stage remained the same in 18 cases, decreased in 5 cases and increased in 14 cases with PET/CT imaging. Total gross tumor volume (GTV) determined by CT (GTVCT-Total) was increased in 32 cases (86.5%) when compared to total GTV determined by PET/CT (GTVPET/CT-Total). The GTV of the primary tumor determined by PET/CT (GTVPET/CT) was larger in 3 cases and smaller in 34 cases compared to that determined by CT (GTVCT). The GTV of lymph nodes determined by PET/CT (GTVLNPET/CT) was larger in 20 cases (54%) and smaller in 12 cases (32.5%) when compared to GTV values determined by CT (GTVLNCT). No pathological lymph nodes were observed in the remaining five cases with both CT and PET/CT. Conclusions: We can conclude that PET/CT can significantly affect both pretreatment staging and assessed target tumor volume in patients with head and neck cancer. We therefore recommend examining such cases with PEC/CT before treatment.

• Environmental and Resource Economics Review
• /
• v.19 no.1
• /
• pp.81-100
• /
• 2010

This paper measures the impacts of the Korea-China Free Trade Agreement (FTA) on the emissions of carbon dioxide ($CO_2$) in Korean export industries. The Korean industrial exports were forecasted by employing Bayesian Kalman Filter Vector Auto-Regression (BVAR) model. The emissions of $CO_2$ were then estimated by applying the $CO_2$ emission coeffcients on the conditionally forecasted values of export by industries. Under the conditional scenario of the 50% reduction in current tariff rate through FTA between Korea and China, the total $CO_2$ emissions in Korea were expected to increase by 1.96% compared to the BAU (Non FT A) trend at the end of 2010. Another conditional scenario with no tariff after 2012 was also adopted. In this case, the total $CO_2$ emlssions were estimated to increase by 2.06% compared to the BAU up until the end of 2014. These facts imply that the FTA between Korea and China would not result in the significant increase of $CO_2$ emissions in Korea.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.10
• /
• pp.1039-1046
• /
• 2008

The combining process of UV irradiation and H$_2$O$_2$ was used to investigate characteristics of cefaclor decomposition in the aquatic environment. The separate mixing tank was used to minimize the decreasing effective of contact area caused by sampling. Four baffles were installed inside the UV reactor for the complete mixing of the sample and outside of the reactor was wrapped with aluminum foil to protect the emission of photon energy. Production of OH radical was measured using pCBA(p-Chlorobenzoic acid) indirectly and rate constants were withdrawn pseudo-frist order reaction. Optimum condition for the maximum production of OH radical was found to be pH 3, hydrogen peroxide of 5 mmol/L and recirculation rate of 400 mL/min. Pseudo-frist order reaction rate constant was 0.1051 min$^{-1}$. In the optimum condition, cefaclor was completely decomposed within 40 min and rate constant was 0.093 min$^{-1}$. Decomposition by OH radical producted intermediate anions such as chloride, nitrate, sulfite and acetic acid and phenylglycine. After 6 hr most cefaclor was decomposed by UV/H$_2$O$_2$ process and converted to CO$_2$ and H$_2$O, resulting of operation in the decrease of TOC and acetic acid and the disappearance of phenylglycine.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.9
• /
• pp.643-653
• /
• 2013

In this study, trend analysis was performed by various runoff analysis method of Non-point Pollution Source(NPS) at the impervious area. The characteristics of rainfall at impervious area appeared to be influenced by rainfall strength and it appeared that first flush phenomenon occurs often if rainfall strength acts largely. It is judged that the measure is required to be prepared against that now that concentration difference of non-point pollution source appeared to be big by precedent number of days of no rainfall. As the result of calculating Decrease Rate (DR) by first flush of non-point pollution source, it is judged that it is important to prepare the measure against the pollutants about initial rain and it is necessary to calculate the capacity of non-point pollution source processing facilities regarding that now that the non-point pollution source integrated at impervious area showed the characteristics that are flowed out in high concentration by initial rain in case of non-rainfall considering the characteristics of non-point pollution source at impervious area. When taking 50% of non-point pollution source as the standard for decrease rate that was evaluated previously, it appeared as 15~60 min in case of TSS and it appeared as 30~90 min in case of organic compound, but the characteristic whose decrease rate is below 50% also appeared even till rainfall-runoff ends. Based on that, it is judged that it could be used as the reference when designing the structural BMPs facilities later.

• Journal of Biosystems Engineering
• /
• v.39 no.3
• /
• pp.227-234
• /
• 2014

Purpose: The aim of this research was to develop and evaluate natural hydroxyapatite (HA) ceramics produced from the heat treatment of pig bones. Methods: The properties of natural HA ceramics produced from pig bones were assessed in two parts. Firstly, the raw materials were characterized. A temperature of $1,200^{\circ}C$ was chosen as the calcination temperature. Fine bone powders (BPs) were produced via calcinations and a milling process. Sintered BPs were then characterized using field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XRF), energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared (FTIR) spectroscopy, and a 2-year in vitro degradability test. Secondly, an indirect cytotoxicity test was conducted on human osteoblast-like cells, MG63, treated with the BPs. Results: The average particle size of the BPs was $20{\pm}5{\mu}m$. FE-SEM showed a non-uniform distribution of the particle size. The phase obtained from XRD analysis confirmed the structure of HA. Elemental analysis using XRF detected phosphorus (P) and calcium (Ca) with the Ca/P ratio of 1.6. Functional groups examined by FTIR detected phosphate ($PO{_4}^{3-}$), hydroxyl ($OH^-$), and carbonate ($CO{_3}^{2-}$). The EDX, XRF, and FTIR analysis of BPs indicated the absence of organic compounds, which were completely removed after annealing at $1,200^{\circ}C$. The BPs were mostly stable in a simulated body fluid (SBF) solution for 2 years. An indirect cytotoxicity test on natural HA ceramics showed no threat to the cells. Conclusions: In conclusion, the sintering temperature of $1,200^{\circ}C$ affected the microstructure, phase, and biological characteristics of natural HA ceramics consisting of calcium phosphate. The Ca-P-based natural ceramics are bioactive materials with good biocompatibility; our results indicate that the prepared HA ceramics have great potential for agricultural and biological applications.

• The Korean Journal of Nuclear Medicine
• /
• v.25 no.1
• /
• pp.37-45
• /
• 1991

Infarct size is a major determinant of prognosis after acute myocardial infarction. Up to date, however, clinically available tests to estimate this size have not been sufficiently accurate. Twelve lead electrocardiogram and wall motion abnormality measurement are not quantitative, and creatine phophokinase (CPK) measurement is inaccurate in the presence of reperfusion or right ventricular infarction. Methods have been developed to localize and size acute myocardial infarcts with agents that are selectively sequestered in areas of myocardial damage, but previously used agents have lacked sufficient specificity. Antibodies that bind specifically only to damaged myocardial cells may resolve this problem and provide an accurate method for noninvasively measuring infarct size. We determined the accuracy with which infarcted myocardial mass can be measured using single photon emission computed tomography (SPECT) and radiolabeled antimyosin antibodies. Seven patients with acute myocardial infarction and one stable angina patient were injected with 2 mCi of Indium-111 labeled antimyosin antibodies. Planar image and SPECT was performed 24 hours later. None of the patients had history of prior infarcts, and none had undergone reperfusion techniques prior to the study, which was done within 4 days of the attack. Planar image showed all infarct patients to have postive uptakes in the cardiac region. The location of this uptake correlated to the infarct site as indicated by electrocardiography in most of the cases. The angina patient, however, showed no such abnormal uptake. Infarct size was determined from transverse slices of the SPECT image using a 45% threshold value obtained from a phantom study. Measured infarct size ranged from 40 to 192 gr. There was significant correlation between the infarct size measured by SPECT and that estimated from serial measurements of CPK (r=0.73, p<0.05). These date suggest that acute myocardial infarct size can be accurately measured from SPECT Indium-111 antimyosin imaging. This method may be especially valuable in situations where other methods are unreliable, such as early reperfusion technique, right ventricular infarct or presence of prior infarcts.

• The Korean Journal of Nuclear Medicine
• /
• v.31 no.3
• /
• pp.310-319
• /
• 1997

This study investigated regional blood flow changes of frontal, temporal, and basal ganglia in eleven schizophrenic patients on DSM-IV criteria to examine the relationship between rCBF and clinical improvement of symptoms. Single-photon emission computed tomography imaging with $^{99m}Tc$-HMPAO was peformed in baseline and sixth weeks after the treatment, and concurrently psychopathology was assessed by PANSS. Antipsychotics wash-out period was more than 2 weeks, and three patient were drug naive. All patients were finally divided into two groups, the improved or not improved. We examined the difference of the amount of rCBF changes between two groups. Finally, frontal activity shows no significant difference between two groups but both groups show decreased frontal blood flow after antipsychotic treatment. However, the change of right temporal rCBF had positive correlation with the change of the total PANSS score, and the change of left temporal lobe activity was greater in the improved group than in the not improved group. Our results suggest that the temporal lobe activity has relation to the underlying schizophrenic symptoms.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.67-67
• /
• 2011

Pulsed DC $BCl_3/SF_6$ 플라즈마를 사용하여 GaAs와 AlGaAs의 건식 식각을 연구하였다. 식각 공정 변수는 가스 유량 (50~100 % $BCl_3$ in $BCl_3/SF_6$), 펄스 파워 (450~600 V), 펄스 주파수 (100~250 KHz), 리버스 시간 (0.4~1.2 ${\mu}s$)이었다. 식각 공정 후 표면 단차 측정기 (Surface profiler)를 사용하여 표면의 단차와 거칠기를 분석하였다. 그 결과를 이용하여 식각률 (Etch rate), 표면거칠기 (Surface roughness), 식각 선택비 (Selectivity)와 같은 특성 평가를 하였다. 실험 후 주사 현미경 (FE-SEM, Field Emission Scanning Electron Microscopy)을 이용, 식각 후 시료의 단면과 표면을 관찰하였다. 실험 결과에 의하면 1) 18 sccm $BCl_3$ / 2 sccm $SF_6$, 500 V (Pulsed DC voltage), 0.7 ${\mu}s$ (Reverse time), 200 KHz (Pulsed DC frequency), 공정 압력이 100 mTorr인 조건에서 GaAs와 Al0.2Ga0.8As의 식각 선택비가 약 48:1로 우수한 결과를 나타내었다. 2) 펄스 파워 (Pulsed DC voltage), 리버스 시간(Reverse time), 펄스 주파수(Pulsed DC frequency)의 증가에 따라 각각 500~550 V, 0.7~1.0 ${\mu}s$, 그리고 200~250 KHz 구간에서 AlGaAs에 대한 GaAs의 선택비가 감소하게 되는 것을 알 수 있었다. 이는 척 (chuck)에 인가되는 전류와 파워를 증가시키고, 따라서 GaAs의 식각률이 크게 증가했지만 AlGaAs 또한 식각률이 증가하게 되면서 GaAs에 대한 식각 선택비가 감소한 것으로 생각된다. 3) 표면 단차 측정기와 주사전자현미경 사진 결과에서는 GaAs의 경우 10% $SF_6$ (18 sccm $BCl_3$ / 2 sccm $SF_6$)가 혼합된 조건에서 상당히 매끈한 표면 (RMS roughness < 1.0 nm)과 높은 식각률 (~0.35 ${\mu}m$/min), 수직의 식각 측벽 확보에서 매우 좋은 결과를 보여주었다. 또한 같은 공정 조건에서 AlGaAs는 식각이 거의 되지 않은 결과 (~0.03 ${\mu}m$/min)를 보여주었다. 위의 결과들을 종합해 볼 때 Pulsed DC $BCl_3/SF_6$ 플라즈마는 GaAs와 AlGaAs의 선택적 식각 공정에서 매우 우수한 공정 결과를 나타내었다.