• International Journal of Quality Innovation
• /
• v.9 no.1
• /
• pp.22-40
• /
• 2008

Unnatural working postures usually cause musculoskeletal problems for workers in work field, especially in traditional industry. Many analysis and survey methodologies have been developed to identify unnatural postures and disorder risks in workplaces. The Ovako Working Posture Analyzing System (OWAS) and Nordic Musculoskeletal Questionnaire (NMQ) are the representative methods and applied widely. This study applied the both tools to investigate the work field of a manufacturing factory of the water heater's case. We divided the manufacturing process into nine workshops, took the pictures of working motions by DV camera and analyzed the postures on OWAS. From the OW AS results, we could identify the risks level of musculoskeletal symptoms as four Action Categories (AC). And from the comparison of OWAS and NMQ results, we could provide the suggestions to improve the working methods and environment. From the results of OWAS, we found that the operators' head/neck and back were above AC3 in some workshops. If the situation continued in long period, the operators might have the risk to get musculoskeletal symptoms. From the investigation of NMQ, we also found that the percentage of aches on neck, shoulders and lower back were higher than other parts of body. The correlation between aches and jobs was more than 75%. So we provided some suggestions to improve: work rotation and adjustment of work surface/height to fit in with Ergonomics. Then the risks of musculoskeletal symptoms would be reduced.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.376-385
• /
• 1984

The habit of anthesis and maturity of sesame were investigated as a basic research for the improvement of high-yielding varieties and cultural practices. Eight different plant types were identified using typical cultivars among gene pool grown in Korea. Non-branching, Monocapsule, Bicarpels quadriloculi (NMB) type showed higher ratio for capsule setting compared with Non-branching, Monocapsule, Quadricarpels octoloculi (NMQ) type. Non-branching, Tricapsules, Quadricarpels octoloculi(NTQ) type presented lower ratio for capsule setting than non-branching, tricapsules, bicarpels quadriloculi(NTB) type. The number of flowers by flower setting position was the highest on lower part, intermediate on middle part, and the lowest on higher part in NMB and NTB type. However, the number of flowers was the highest on middle part, intermediate on lower part, and lowest on higher part in NMQ and NTQ type. BMB type appeared to have the highest ratio for capsule setting when compared with the other plant types. BTB type with many flowers and capsules exhibited higher percentage for capsule setting than BTQ type with lowest capsule setting percentage. Capsule setting percentage of branch appeared to be lower than that of main stern in the branching type. The branching type had more flowers and capsules than non-branching type. Tricapsules type had more flowers and capsules per plant than monocapsule type, and bicarpels quadriloculi type had more than quadricarpels octoloculi type. However, capsule setting ratio in non-branching type was higher than in branching type. The ratio was higher in monocapsule type than in tricapsules type. Bicarpels quadriloculi type had higher ratio of capsule setting than quadricapels octoloculi type. Number of capsules per plant and capsule setting ratio are supposed to be dominated by shape of capsule (number of carpels and loculi), not by branching or number of capsules per axil. The order of number of capsules per plant was as follows; BTB, BMB, NTB, BTQ, BMQ, NTQ, NMQ, and NMB types. However, the order of capsule setting ratio was as follows: BMB, NMB, NTB, NTQ, NMQ, BMQ, BTB, BTQ types. Consequently, branching, tricapsules, bicarpels quadriloculi(BTB) type was considered as a sourse of breeding for high yielding varieties by introducing the genes govering BMB type with one capsule per axil which has high capsule setting ability.

• International Journal of Quality Innovation
• /
• v.5 no.2
• /
• pp.79-88
• /
• 2004

The purpose of this study was to analyze the prevalence of self-reported musculoskeletal symptoms among the three Taiwan's traditional industries as lathe, electronics and food by the Nordic Musculoskeletal Questionnaire (NMQ). Moreover, the study was also to make a comparison among the aforesaid industries for revealing their differences. The result of the questionnaire indicated that the symptoms appeared on the three industries were all originated from four parts as neck, shoulders, elbows, and wrists/hands. More than 68% of the interviewers thought that their symptoms might be related to their work. However, the rate of harmful influence resulted from life or job was over 50%. As to the respect of the interviewers' attitude in treating their symptoms, more than 80% of them neglected or just treated the symptoms by massaging or cold/hot compressing and resting. From the questionnaire, the proportion of symptoms discussed in each item indicated that the distribution, in perceiving symptom, of interviewers were not quite identical; however the Chi-square test discovered majority did not reach 0.05 levels, hence the difference among industries were not significant.

• Atmosphere
• /
• v.24 no.3
• /
• pp.433-444
• /
• 2014

Although the Radar-AWS Rainrate (RAR) calculation system operated by Korea Meteorological Administration estimated precipitation using 2-dimensional composite components of single polarization radars, this system has several limitations in estimating the precipitation accurately. To to overcome limitations of the RAR system, the Korea Meteorological Administration developed and operated the RMQ (Radar-based Multi-sensor Quantitative Precipitation Estimation) system, the improved version of NMQ (National Mosaic and Multi-sensor Quantitative Precipitation Estimation) system of NSSL (National Severe Storms Laboratory) for the Korean Peninsula. This study introduced the RMQ system domestically for the first time and verified the precipitation estimation performance of the RMQ system. The RMQ system consists of 4 main parts as the process of handling the single radar data, merging 3D reflectivity, QPE, and displaying result images. The first process (handling of the single radar data) has the pre-process of a radar data (transformation of data format and quality control), the production of a vertical profile of reflectivity and the correction of bright-band, and the conduction of hydrid scan reflectivity. The next process (merger of 3D reflectivity) produces the 3D composite reflectivity field after correcting the quality controlled single radar reflectivity. The QPE process classifies the precipitation types using multi-sensor information and estimates quantitative precipitation using several Z-R relationships which are proper for precipitation types. This process also corrects the precipitation using the AWS position with local gauge correction technique. The last process displays the final results transformed into images in the web-site. This study also estimated the accuracy of the RMQ system with five events in 2012 summer season and compared the results of the RAR (Radar-AWS Rainrate) and RMQ systems. The RMQ system ($2.36mm\;hr^{-1}$ in RMSE on average) is superior to the RAR system ($8.33mm\;hr^{-1}$ in RMSE) and improved by 73.25% in RMSE and 25.56% in correlation coefficient on average. The precipitation composite field images produced by the RMQ system are almost identical to the AWS (Automatic Weather Statioin) images. Therefore, the RMQ system has contributed to improve the accuracy of precipitation estimation using weather radars and operation of the RMQ system in the work field in future enables to cope with the extreme weather conditions actively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.2
• /
• pp.214-219
• /
• 1986

This study was conducted to provide basic information to breeders and agronomists working with sesame. Grain filling rate were investigated for eight plant types classified by branching habit, capsules per axil, carpels and loculi of a capsule. Two typical cultivars were chosen for plant type among 527 gene pools. Grain filling rate didn't increase with little difference between lower and middle part capsules, Jut significantly decreased in upper part. Grain filling rate of lower part, main stem and center capsules appeared higher than that of upper part, branch and side capsule for grain filling. Mono-capsule setting and unbranched plant type were higher for grain filling than tricapsule setting and branched type due to inactive ripenness on branched capsule. NMB type showed that best maturity and relatively good grain filling in BTB type despite it's largest sink capacity. NTQ and BTQ type appeared poor ripenness because of immaturity of higher part side capsules; however it was believed that there were still possibilities for improving ripenness in 3 capsule and 4 carpels 8 loculi type by the good maturity of 1 capsule and 4 carpels 8 loculi type.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.1
• /
• pp.76-83
• /
• 1984

This experiment was performed to investigate the flowering habit of sesame (Sesamum indicum L.). Sesame varieties tested could be classified into 8 different plant types by their morphological traits such as capsule shape, capsule setting habit and branching types among sesame gene pool of Crop Experiment Station, ORD. The first flower was appeared at the lowest node on main stem. Flowers were appeared progressively toward the tip of the main stem and also toward the tips of branches. The interval of flowering for a node was about one day, but 3 to 8 days for the flowers on the tips. Side flowers started at 4 to 5 nodes lower than those of center flower at the same day. Flowers were beared 2 by 1 node on the middle part of flower setting node (7-9) in mono capsule setting habit in spite of its normal is 1 by 1 node on the other nodes. Flowers were beared opposite direction on each node of stem and flowering toward the tip of main stem composed of cross shape between nodes and spiral, reverse of clockwise direction. We called this habit as cross spiral flowering order and cross spiral phyllotaxis. The first flower on branches was appeared when center flower on the 5th node of main stem began to flower. The branches produced at higher nodes on main stem showed larger flowering periods and more number of flowers than that at lower parts. BTB (Branch, Tricapsule, Bicarpels, 4 Loculi) type showed three capsule setting habits and same flowering period both on main stem and branches while BTQ (Branch, Tricapsule, Quadricarpels, 8 Loculi) type showed three capsule setting habit on main stem and mono-capsule setting habit on branches. In BTQ type, the period of flowering was much shorter on branches than on main stem. Branching type was considered more promising than non branching type for the breeding of early maturing high yielding variety because branching type has the advantage of bearing a lot of flowers in comparatively short flowering period.