• Journal of Advanced Marine Engineering and Technology
• /
• 제34권4호
• /
• pp.522-531
• /
• 2010

선박에서 발생되는 다양한 형태의 디지털 정보를 그 특성에 따라 적절하게 처리하기 위해서는 용도에 적합한 네트워크의 구성이 필요하다. 이러한 필요성에 부합하는 표준으로 NMEA 2000과 IEC 61162-4가 있다. NMEA 2000은 실시간 데이터의 처리에 적합한 표준이고, IEC 61162-4는 데이터의 통합 관리에 적합한 표준이다. 따라서, NMEA 2000 데이터를 통합하여 관리하기 위해서는 IEC 61162-4 포맷으로 변환하여야 한다. 본 논문에서는 이러한 변환을 위한 참조화일 및 알고리즘을 제시하고 그 구현 결과를 기술한다.

• 대한임베디드공학회논문지
• /
• 제12권6호
• /
• pp.405-411
• /
• 2017

As the number of sensors in a ship has increased, studies have been actively conducted to efficiently manage a large amount of data. Sensors in a ship follow the NMEA (National Marine Electronics Association) data format. In particular, NMEA0183 standardized as IEC 61162-1 and NMEA2000 standardized as IEC 61162-3 are widely used. NMEA0183 is a protocol based on serial communication and NMEA2000 is a protocol based on CAN (Controller Area Network) communication. We implemented a gateway that receives data from NMEA0183 sensors and NMEA2000 sensors and then transmits them to the server on TCP/IP network. By using the NMEA2000 0183/2000 gateway to receive the sensor data and manage it through the ship's preventive maintenance system, the sensor data can be utilized efficiently and promptly. This management can reduce crew's daily tasks and reduce the number of accidents.

• 한국정보통신학회논문지
• /
• 제19권2호
• /
• pp.317-322
• /
• 2015

최근 선박용 전자, 통신 장비들이 다양하고 복잡해짐에 따라 새로운 통신 프로토콜을 적용하기 위한 많은 연구가 진행되고 있다. 그중에서도 CAN(Controller Area Network)통신 프로토콜을 기반으로 하는 NMEA(National Marine Electronics Association)2000 프로토콜은 대표적인 차세대 선박용 프로토콜로 표준화와 더불어 선박에 적용되고 있다. NMEA2000은 선박에서 사용되는 다양한 데이터들을 다른 전자장비로 통신하기 위한 표준으로 네트워크 관리를 위한 서버가 필요 없는 멀티마스터의 실시간 제어 네트워크이다. 본 연구에서는 NMEA 2000 기반의 선박 센서용 프로토콜 변환 알고리즘의 구현과 NMEA2000/CAN/Ethernet/RS232 등의 데이터 포맷 변환 및 NMEA2000 기반 전용 케이블을 고려한 아날로그 데이터 모듈의 개발을 목표로 한다. 본 연구에서 NMEA2000 핵심 기술의 개발과 적용으로 다양한 통신 프로토콜을 지원함으로써 사용자 기반의 데이터 모니터링 시스템을 설계하고 구현하였다.

• 한국항해항만학회지
• /
• 제38권2호
• /
• pp.121-126
• /
• 2014

본 논문은 저가형 GPS 수신 모듈에 DGPS 서비스를 적용하기 위한 방안으로 NMEA GPGSV 데이터의 위성 배치 정보에 포함된 위성 앙각과 방위각으로 관측 행렬을 구성한 후, 거리기반 보정정보를 위치영역으로 투영하여 기 산출된 위치 오차 벡터를 수정하는 방안을 제시하였다. 저가형 수신기인 U-blox LEA-5H 모델의 출력 데이터에 제안한 알고리즘을 적용한 결과 주 활동 시간인 낮 시간에 수평 오차 RMS를 1.8m에서 1m 이내로 줄였으며, 수직 정확도는 RMS 5.8m에서 1.4m로 75% 향상시킴을 확인하였다. 본 논문에서 제안하는 방식은 하드웨어의 변경없이 소프트웨어만으로 저가형 GPS의 성능을 DGPS 수준으로 향상시키는 기법이므로, 소비자와 제조사의 부담을 경감시켜 향후 제공될 고정밀 측위 서비스 인프라의 활성화에 기여할 수 있을 것으로 기대된다.

• Journal of Positioning, Navigation, and Timing
• /
• 제3권1호
• /
• pp.25-30
• /
• 2014

Differential Global Positioning System-Correction Projection (DGPS-CP) algorithm, which has been suggested as a method of correcting pre-calculated position error by projecting range-domain correction to positional domain, is a method to improve the accuracy performance of a low price GPS receiver to 1 to 3 m, which is equivalent to that of DGPS, just by using a software program without changing the hardware. However, when DGPS-CP algorithm is actually realized, the error is not completely eliminated in a case where a reference station does not provide correction of some satellites among the visible satellites used in user positioning. In this study, the problem of decreased performance due to the difference in visible satellites between a user and a reference station was solved by applying the Multifunctional Transport Satellites (MTSAT) based Augmentation System (MASA) correction to DGPS-CP, instead of local DGPS correction, by using the Satellite Based Augmentation System (SBAS) operated in Japan. The experimental results showed that the accuracy was improved by 25 cm in the horizontal root mean square (RMS) and by 20 cm in the vertical RMS in comparison to that of the conventional DGPS-CP.

• 한국산학기술학회논문지
• /
• 제12권3호
• /
• pp.1313-1318
• /
• 2011

안전하고 정확한 항해를 위해 선박에서는 진북을 나타내는 자이로 콤파스와 자북을 가리키는 마그네틱 콤파스, 그 외에 GPS 등의 다양한 선박 전자장치들이 활용되고 있지만 이러한 장치들의 호환성 문제로 인해 전체 선박 시스템의 효율성 및 유지보수성이 크게 저하되고 있다. 본 논문에서는 이러한 호환성 문제를 해결하기 위해 선박 전자장치의 다양한 출력신호들을 동일한 하나의 표준 형식으로 변환해 주는 프로토콜 통합 시스템을 제안하였다. 시스템 설계 시 다수의 장치들로부터 입력되는 신호들을 동시에 처리하기 위하여 Multi-threading 기법을 적용하였으며, 실험을 통해 이를 통한 데이터 처리 성능 향상을 확인하였다.

• 한국항해학회지
• /
• 제23권3호
• /
• pp.1-15
• /
• 1999

Recently, due to the several factors such as the advent of very large vessels and high-speed vessels, and the increase of the maritime traffic density at sea, the obligation, responsibility and burden of marine officers on duty for the safety of navigation has been highly escalated. Under these situations, if the appropriate and correct navigational information is given to officers at real time by means of certain integrated information processing system, these obligation, burden and danger can be reduced. This paper deals with the study on the development of the Navigational Information Monitoring and Recording System that can give and record the integrated navigational information based on the personal computer system installed on board. To construct this system, the interface unit which changes different signal types of navigational equipments to NMEA 0183 signal format and the application software to show the visual navigational information were developed. In this study, the navigation system of T/S HANBADA in Korea Maritime University was used in order to construct the actual system that can be utilized in other ships, and also the performance test was carried out several times to examine the performance of the system developed. It was proved that all functions of the system as designed worked smoothly through the performance test. Also this system could be operated easily and conveniently by every user.

• 수산해양기술연구
• /
• 제44권3호
• /
• pp.218-228
• /
• 2008

This paper describes on the real-time tracking of ship's dynamic behavior by AIS information in the coastal waters. The AIS data was received at a land station by using the antenna of AIS receiver mounted on the rooftop of the laboratory, Pukyong National University (PKNU), Busan, Korea, and stored as a NMEA format of serial output sentence of VDM(VHF Data-Link Message) and displayed on the ENC(Electronic Navigational Chart) of a PC-based ECDIS. In this study, the AIS receiver was mainly used to obtain the dynamic information that is necessary to evaluate and track the movement situation of training ship "KAYA" of PKNU in the coastal waters. The change of position with time for the ship turning under the rudder angle of port $30^{\circ}$ was correctly tracked with the turning circle of 940 m in diameter on the ENC of a PC-based ECDIS. Then, the dynamic information of the AIS system was updated every 6.29 seconds under the turning situation for the speed of 10.9 knots and every 21.65 seconds under the situation running at the speed of 11.05 knots on the straight line route of $155^{\circ}$, respectively. In case of AIS target tracking in the inshore zone behind large topographical obstructions, such as mountain and apartment buildings, the update rate of dynamic information was irregularly changed by the existence of land obstacles. However, the position tracking by AIS information under the situation existing no sea obstructions was achieved in real or near real-time and the instant presentation of course alternations for the ship was correctly monitored by using a PC-based ECDIS. From these results, we concluded that the PC-based ECDIS technology and methodology combined with the AIS information can be easily extended and applied to the surveillance and management for the fishing operation of fishing vessels in the coastal zone and in the EEZ fishing grounds.