• Microbiology and Biotechnology Letters
• /
• v.20 no.6
• /
• pp.663-667
• /
• 1992

The production of vinegar containing 16.0-18.0% of acetic acid was examined in two stage fermentation consisting of semi-continuous and fed-batch type. The optimum conditions were obtained when the fermentation was carried out at agitation of 600 rpm, aeration of 0.1 vvm and temperature of $30^{\circ}C$. The initial and residual ethanol concentration in 1st stage were $50.0g/{\ell}$ and $5.0g/{\ell}$, respectively, and the ethanol concentration in 2nd stage was maintained from 5.0 to $10.0g/{\ell}$. The maximum productivity was 3.3 gll-hr and the acidity was 17.6% after the two days of acetic acid fermentation.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.235-238
• /
• 2016

Microstructure and magnetization behaviors of $MnBi/Fe_3B/Nd2_Fe_{14}B$ nanocomposite alloy have been investigated. It was found that the coercivity increased firstly and then decreased, and saturation magnetization decreased with the additon of MnBi alloy. The addition of 40 wt.% MnBi powder enhanced the coercivity from 192.8 kA/m to 311.2 kA/m. The ${\delta}M$ and D(H)-H plots suggested the occurrence of a stronger exchange-coupling occurring between the hard and soft magnetic phase for this sample. The dependence of coercivity with temperature was discussed in 40 wt.% $Mn_{55}Bi_{45}$/ 60 wt.% $Nd_{4.5}Fe_{76.5}Nb_{0.5}B_{18.5}$ alloy powder, and a positive temperature coefficient was founded from 298 K to 350 K.

• Journal of Haehwa Medicine
• /
• v.15 no.1
• /
• pp.1-9
• /
• 2006

For this study, we carried out dementia assessment examination of 74 patients with memory disturbance who have come to Cheongju oriental hospital of Daejeon university from April 2005 to February 2006. This study classified the patients as none-dementia(ND), questionable dementia(QD), and dementia(DA) groups and analyzed the result of examination. As a result, the following conclusion was drawn. 1. Among the 3 groups, there was no significant differences in the sex distribution. But according to age distribution, the age of QD and DA groups showed significant difference from that of ND group. 2. MMSE-K and HDS-K scores showed the significant differences among all groups, and 7 MS result showed the significant difference between ND and the other groups. 3. The DA group significantly got lower scores than ND group in the items of the MMSE-K, Orientation, Registration, Recall, Attention, Copy two pentagons and Comprehension. Especially, significant difference also was shown in the orientation item between QD and DA groups. 4. The scores in the items of 7 MS, Benton temporal orientation, Enhanced cued recall and Clock drawing showed significant difference among all groups. Category fluency score showed significant difference between ND and the other groups. 5. The results of Brain CT and clinical chemistry test didn't show significant difference among all groups.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.5
• /
• pp.629-635
• /
• 2006

Manufacture of motor by laser has been studying realization that was demands on market for lightening and miniaturization. Moreover. early in the 1980s. manufacture of parts for automobiles by laser welding was already successfully introduced. The purpose of this study was to develop production technology of the high quality laminated stator core for motor by pulsed Nd:YAG laser heat source. In the event of adjusting defocus and voltage to control humping in laser welding of the laminated core. sound bead could be obtained. but deep penetration was not. Therefore. explosive evaporating plasma was controlled by adjustment of peak power on pulse width. Particularly, because explosive evaporating plasma induced high peak power, made molten metal in keyhole scatter. a suitable adjustment of peak power was required to obtain sound bead. As a results of experiment. sound bead and deep penetration could be obtained.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.5
• /
• pp.623-628
• /
• 2006

Laser material processing is a very fast advancing technology for various industrial applications. because of many advantages. Its major advantage of less and controlled heat input has been exploited successfully for the very critical application of aluminium alloy welding. This study suggested the occurrence source of weld-defects and its solution methods in a welding of lithium ion battery by pulsed Nd:YAG laser. In experiment. battery case has changed over joint geometry from welding of side position to flat one. In the case of a electrolyte injection hole in order to seal it. welding is carried out after pressing Al ball. At this time. an eccentric degree. contact length and gap are worked as a major parameters. As improving the method of Al ball pressing. it was able to reduce an eccentricity. increase the contact length and decrease gap. As a results of a experiment. a sound weld bead shape and crack-free weld bead can be obtained.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.1
• /
• pp.15-19
• /
• 1989

This experiment was carried out in order to know the changes in dry matter production of the 2nd cutting by the times of established pasture and its relation with morphological and structural characters of orchardgrass sward. Experimental pasture was established by the times of year, from 1 year to 7 year, 1986 through 1980, alternately. The results were summarizedas follows: 1. The population density of the 2nd cutting was extremely decreased by the times of established year. 2. The dry weight of $plantsW)$ was positively significant correlations with plant length(PL), number of tillers per plant (NT/pl.) and the dry weight of plant(DW/pl.). 3. The highest value of the dry weight of plants(DW) was obtained at 7 year old pasture. 4. The pasture productivity of 7 year old pasture was resulted by the increases of regrowth capacity, yield components and structural characters of the 2nd cutting. 5 . Relationship between morphological and structural characters concerned vegetational structure of the 2nd cutting were changeable year by year.

• Journal of the Korean Ceramic Society
• /
• v.32 no.7
• /
• pp.839-845
• /
• 1995

The structural and dielectric properties of Pb(Mg1/3Nb2/3)O3 ceramics substituted by Nd3+, La3+, K+ and Na+ were studied over 0~50 at.% substituent content. The 1 : 1 ordering behavior of Mg2+ and Nb5+ ions in the B site sublattice was observed in Nd3+-and La3+-modified compounds. The degree of ordering was increased with Nd3+, La3+ content in the compounds. But K+-or Na+-modified compounds did not exhibit the ordering behavior. This was explained by charge and size effect of A and B site cations and oxygen vacancies. As the mole fractions of substituent increased, the maximum values of dielectric constants were rapidly decreased and the phase transitions were broadened. Phase transition temperature was correlated with the covalency of A-O and B-O bonding.

• Journal of Magnetics
• /
• v.9 no.4
• /
• pp.109-112
• /
• 2004

The HDDR (Hydrogenation-Disproportionation-Desorption-Recombination) process is a special method to produce anisotropic NdFeB powders for bonded magnet. The effect of the modified HDDR process on magnetic properties of $Nd_2Fe_{14}B$-based magnet with several composition $Nd_{11.2}Fe_{66.5-x}Co_{15.4}B_{6,8}Zr{0.1}Ga_x(x=0{\sim}1.0)$ and that of microelement Ga, disproportional temperature and annealing temperature on $_jH_c$, grain size were investigated in order to produce anisotropic powder with high magnetic properties. It was found that modified HDDR process is very effective to enhance magnetic properties and to fine grain size. The addition of Ga could change disproportionation character remarkably of the alloy and could improve magnetic properties of magnet powder. Increasing annealing temperature induces significant grain growth. And grain size produced by modified HDDR process is significantly smaller than those produced by conventional HDDR process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.312-316
• /
• 1999

I-V characteristics of Praseodymium-based ZnO varistor doped with $Nd_2O_3$ in the range 0.0-2.0mol% sintered at 130$0^{\circ}C$ and 135$0^{\circ}C$ were investigated. In the all sides, ZnO varistors sintered at $1300^{\circ}C$ exhibited much better varistor characteristics than that at 135$0^{\circ}C$. All ZnO varistors doped with $Nd_2O_3$ sintered at $1300^{\circ}C$ exhibited good varistor characteristics but particularly ZnO varistor doped with l.Omol% $Nd_2O_3$ exhibited the best characteristics, which the nonlinear is 65.2 and the leakage current is 4.5pA. It is estimated that ZnO varistor doped with l.Omol% $Nd_2O_3$ will begin to be sufficiently used as basic composition to fabricate a good varistor.

• KSBB Journal
• /
• v.15 no.6
• /
• pp.635-643
• /
• 2000

To compare the antioxidative activities of fish skin and bovine skin gelatin hydrolysate, gelatin hydrolysates from Alaska pollack and bovine skin were prepared by various enzymatic hydrolysis methods (1st step, Alcalase; 2nd step, pronase E; 3rd step, collagenase) using a continuous three-step membrane reactor. The molecular weight distributions of the 1st, 2nd and 3rd step hydrolysates were 7∼10 kDa, 2∼5 kDa and 0.7∼0.9 kDa, respectively. The antioxidative activity of fish skin gelatin hydrolysate was stronger than that of bovine skin gelatin hydrolysate, and in particular, both of 2nd step hydrolysates showed more antioxidative activity than hydrolysates of any other step. The optimum antioxidative activity concentration of the 2nd step hydeolysates of fish and boving skin were 1% (w/w) in a linoleic acid water-alcohol emulsion. In cultured cells exposed to t-butyl hydroperoxide (t-BHP), the 2nd step hydrolysate of fish skin gelatin delayed cell death most. These results suggest that the antioxidative activity of fish skin gelatin hydrolysate is higher than that of bovine skin gelatin hydrolysate because of their different amino acid contents.