• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.320-326
• /
• 2008

The output characteristics of a laser-diode pumped electrooptic Q-switched Nd:YAG ceramic laser were investigated. The output energy of a Q-switched Nd:YAG ceramic laser was optimized under an output coupler reflectivity of 77%, a laser-diode pulse width of $1,000\;{\mu}s$, and a delay time of $985\;{\mu}s$. The output energy of the Q-switched pulse was measured to be 0.35 mJ with a pulse width of 4 ns under a pump energy of 17.9 mJ. The output efficiency and the peak power were 1.9% and 87.5 kW, respectively.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.05a
• /
• pp.149-149
• /
• 1999

• Korean Journal of Materials Research
• /
• v.18 no.5
• /
• pp.266-271
• /
• 2008

Magnesium alloys are alloyed with rare earth elements (Re, Ca, Sr) due to the limited use of magnesium in high-temperature conditions. In this study, the influences of Zr and Zn on the aging behavior of a Mg-Nd-Y alloy were investigated. magnesium alloys containing R.E elements require aging treatments Specifically, Nd, Y and Zr are commonly used for high-temperature magnesium alloys. Various aging treatments were conducted at temperatures of 200, 250 and $300^{\circ}C$ for 0.5, 1, 3, 6, and 10 hours in order to examine the microstructural changes and mechanical properties at a high temperature ($150^{\circ}C$). Hardness and high-temperature ($150^{\circ}C$) tensile tests were carried out under various aging conditions in order to investigate the effects of an aging treatment on the mechanical properties of a Mg-3.05Nd-2.06Y-1.13Zr-0.34Zn alloy. The maximum hardness was 67Hv; this was achieved after aging at $250^{\circ}C$ for 3 hours. The maximum tensile, yield strength and elongation at $150^{\circ}C$ were 237MPa, 145MPa and 13.6%, respectively, at $250^{\circ}C$ for 3 hours. The strengths of the Mg-3.05Nd-2.06Y-1.13Zr-0.34Zn alloy increased as the aging time increased to 3 hours at $250^{\circ}C$ This is attributed to the precipitation of a Nd-rich phase, a Zr-rich phase and $Mg_3Y_2Zn_3$.

• Journal of Powder Materials
• /
• v.20 no.5
• /
• pp.359-365
• /
• 2013

In this study, we fabricated $Nd_2Fe_{14}B$ hard magnetic powders with various sizes via spray drying combined with reduction-diffusion process. Spray drying is widely used to produce nearly spherical particles that are relatively homogeneous. Thus, the precursor particles were prepared by spray drying using the aqueous solution containing Nd salts, Fe salts and boric acid with the target stoichiometric composition of $Nd_2Fe_{14}B$. The mean particle sizes of the spray-dried powders are in the range from one to seven micrometer, which are adjusted by controlling the concentrations of precursor solutions. After debinding the as-prepared precursor particles, ball milling was also conducted to control the particle sizes of Nd-Fe-B oxide powders. The resulting particles with different sizes were subjected to subsequent treatments including hydrogen reduction, Ca reduction and washing for CaO removal. The size effect of Nd-Fe-B oxide particles on the formation of $Nd_2Fe_{14}B$ phase and magnetic properties was investigated.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.427-431
• /
• 1995

The influence of Nd and B contents on the magnetic properties and structures of ${\alpha}-Fe$ based Nd-(Fe,Co)-B-Mo-Cu alloys was investigated. $Nd_{4}{(Fe_{0.9}Co_{0.1})}_{92-x}B_{x}Mo_{3}Cu_{1}$ and $Nd_{x}{(Fe_{0.9}Co_{0.1})}_{86-x}B_{10}Mo_{3}Cu_{1}$ amorphous alloys prepared by rapid solidification process were crystallized to form nanocrystalline structure. The increase of B content in $Nd_{4}{(Fe_{0.9}Co_{0.1})}_{92-x}B_{x}Mo_{3}Cu_{1}$ nanocrystalline resulted in the change of stucture of soft phase in the sequence of ${\alpha}-Fe$->${\alpha}-Fe+Fe_{3}B$->$Fe_{3}B$. The coercivitis of the alloys were increased with increasing B content and was 263 kA/m at x=18. On the contrary, the remanence has shown an opposite trends. The increase of Nd content in $Nd_{x}{(Fe_{0.9}Co_{0.1})}_{86-x}B_{10}Mo_{3}Cu_{1}$ nanocrystalline containing ${\alpha}-Fe$ as main phase had no effect on the structure and improved coercivity up to 256 kA/m. However, the remanence was decreased from 1.4 T to 1.15 T according to the increase of Nd content.

• The korean journal of orthodontics
• /
• v.17 no.2
• /
• pp.321-333
• /
• 1987

The purpose of this study was to observe the changes of the lower 3rd molars following the extraction of the lower 2nd molars by Lateral Cephalograms and Orthopantomograms. The subjects consisted of twenty malocclusion, 7 males 13 females, were 19 year 5 month old at the removal of the lower 2nd molars, 19 year 1 month old at the end of the orthodontic supervision after the removal of the lower 2nd molars (mean age) The obtained results were as follows, 1 It is recommended to extract the lower 2nd molars when the lower 3rd molars are Nolla's Stage 4 or 5 2 With the pre-extraction variables obtained by factor analysis, it was possible to predict the long axis of the lower 3rd molars after 2nd molar extraction. 3 There were no impacted 3rd molars.

• Journal of ILASS-Korea
• /
• v.5 no.4
• /
• pp.33-39
• /
• 2000

The behavior of the 2-stage spray was studied by using the schlieren method with the high pressure common-rail injection system. The spray injected 2 times with the interval of $0.3ms{\sim}1.5ms$ between the 1st and the 2nd spray in a modeled combustion chamber of constant volume bomb. In this case, the quantity of injected fuel of 1st and 2nd also changed. The schlieren photograph shows that the 2nd spray goes further away than the 1st spray when the quantity of the 1st spray is less than that of the 2nd spray. The dispersion of the vapour to the combustion chamber is not affect in a 10% of 1st spray quantity. When the 1st spray quantity is more than the 2nd spray, the vapour scattering of spray is good.

• Korean Journal of Crystallography
• /
• v.7 no.1
• /
• pp.1-7
• /
• 1996

We developed an automatic diameter control system to control the diameter of single crystal for Czochralski growth. The system is composed of load cell, software program and data acquisition system connected to computer which controls RF power. This study describes the basic principle, characteristics and components of the system. The diameter of Nd:YAG crystal could be controlled within ±5% tolerance by this system.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.6
• /
• pp.260-264
• /
• 2002

We developed LD Pumped Nd:$VVO_4$ microchip laser with the cavity length of 1mm. The microchip laser output was 87.5㎽ at the wavelength of 1063.9nm with the input power of 241㎽ at the wavelength of 809nm. The slope efficiency was 40.7% and the threshold input power was 31.1㎽. We have also defined input power limit for the single longitudinal mode operation theoretically. It was 2.5 times larger than that of threshold input intensity. According to the results of simulation, the Nd:YVO$_4$ microchip laser can be operated with the maximum output of 15㎽ for the single longitudinal mode up to the input power of 77.75㎽.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.5
• /
• pp.752-758
• /
• 2015

This study was conducted to investigate the antioxidant and anti-obesity activity of ethanol extracts from fermented Arctium lappa L. Arctium lappa fermented twice with Phellinus linteus ($2^{nd}$ FA) showed more DPPH radical scavenging activity than non-fermented Arctium lappa (NFA), and Arctium lappa fermented once ($1^{st}$ FA) at a concentration of 62.5 ppm. The $2^{nd}$ FA showed the highest level of ABTS radical scavenging activity at concentration range of 31.5~125 ppm. The ABTS free radical scavenging activities of $1^{st}$ FA and $2^{nd}$ FA were similar to that of BHA, a synthetic antioxidant, at a concentration of 250 ppm. The total polyphenol content of $2^{nd}$ FA was higher than those of NFA and $1^{st}$ FA. The flavonoid content was significantly increased in $1^{st}$ FA and $2^{nd}$ FA than NFA. During adipocyte differentiation, lipid accumulation in 3T3-L1 cells was significantly decreased in the order of NFA, $1^{st}$ FA, and $2^{nd}$ FA at all concentrations. In conclusion, the antioxidant and anti-obesity activities of A. lappa were increased depending on the degree of fermentation. It is suggested that fermented Arctium lappa, especially $2^{nd}$ FA, could be used as a natural ingredient for functional foods and medicine.