• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.456-460
• /
• 1999

Experimental studies of laser micromachining on Mo diaphragm using piezo Q-switched Nd:YAZ laser have been performed. Application of miniaturized micorcolumn electron gun arrays as a potential electron beam lithography or portable mini-scanning electron microscope (SEM) application have recently extensively examined. The conventional microcolumn fabrication technique would give a limitation on the minimization of aberration, In this paper, we obtained 20~30 $\mu \textrm m$aperture of laser micromachining on Mo diaphragm using piezo Q-swithed Nd:YAG laser. The geometrical figures, such as the diameter and the preciseness of the drilled aperture are dependent upon the total energy of the laser pulse train, laser pulse width, and the diameter of laser spot in addition to the materials-dependent parameters.

• Korean Journal of Crystallography
• /
• v.11 no.4
• /
• pp.195-199
• /
• 2000

Ceramics based on CaTiO₃-NdAlO₃ solid solutions were synthesized in order to study their dielectric microwave properties. Microstructural analysis was performed with scanning electron microscopy (SEM) and transmission electron microscopy (TEM) using different analytical methods such as energy-dispersive X-ray spectroscopy (EDXS). It was observed that the heating conditions during sintering and cooling strongly affect the microstructural development of CaTiO₃-NdAlO₃-based ceramics. Various types and concentrations of structural defects were identified, for example, dislocations, twins and/or antiphase boundaries. all such defects resulted in a degradation of the dielectric microwave properties, in particular the quality factor Q. Dielectric properties of CaTiO₃-NdAlO₃-based ceramics can be improved by an appropriate thermal treatment of ceramics which results in a decrease in the concentrations of the identified microstructural defects.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.965-967
• /
• 2003

Czochralski pulling method에 의해 성장된 고농도 도핑 Nd:LSB의 광학적 특성을 조사하였다. 결정 성장조건에 의해 달라지는 space group은 지금까지 C2/c, R32, Cc와 C2등 4가지가 보고되었으며, 기본적으로 6방정계의 구조를 가지고 비선형 광학 결정으로서의 특성을 보였다. x선 회절 분석계를 이용하여 구조를 분석하였고, 도핑 농도에 따른 형광 수명의 변화, 분산곡선 특성을 조사하였다. 또한 흡수 및 저온 형광 스펙트럼을 이용하여 도핑 농도 및 space group의 변화에 따른 에너지 준위의 변화를 관찰하고 비교하였다.

• Laser Solutions
• /
• v.10 no.4
• /
• pp.1-6
• /
• 2007

This study includes the effects of shielding gas types and flow rate on Nd:YAG Laser weldability of sintered material. The types of shielding gas were evaluated for He, Ar and N2. Bending strength, porosity rate, hardness and aspect ratio testing of laser weld are carried out to evaluated the weldability. As a results, Ar gas was showed the best welding strength even it has the most porosity content on weld metal, and depend on increases the gas flow rate, it was not only got deeper penetration depth but also showed higher bending strength. Therefore we could know that bending strength is not only affect the porosity content but also melting area.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.146-153
• /
• 1993

Thd specimens were melited in high frequency induction furnace. The samples for measurements were prepared by machining cylinder of 9.5mm diameter and 15mm height. These samples were then hot-pressed according to strain rate ( .epsilon. ). These samples were decanned and cut out, and subsequently heat treated at 1000 .deg. C for 4hours. These were investigated for the change of microstructure, domain pattern, X-ray diffraction and magnetic properties. The stress distributions in the specimens during compressing process were calculated by a finite element method program(SPID). The calculated stresses were effective stress( .sigma. $_{eff}$), compressive direction stress( .sigma. $_{z}$), and shear stress( .tau. $_{rz}$ ). These stresses were compared with the experimental data.a.a.

• Laser Solutions
• /
• v.14 no.3
• /
• pp.12-16
• /
• 2011

In automotive industry, because of the consideration of fuel economy, lightweight alloys have been adopted and are expected to be extensively used in the future. Magnesium alloys are among the promising materials, due to their lightweight and good mechanical properties. This study is related to the laser weldability of AZ31B magnesium alloy, an all-purpose wrought alloy with good strength and ductility. A 4kW Nd:YAG laser was used to join AZ31B sheet, and the effects of welding parameter on the quality of lap-welded joints were investigated. As a result of this study, the optimal condition was obtained, and the effect of gap distance was also revealed on the porosity control.

• Economic and Environmental Geology
• /
• v.30 no.4
• /
• pp.313-320
• /
• 1997

Geochemical and Sm-Nd isotopic results are reported for amphibolite of the Muju area, Ryeongnam massif. Major and trace element data analyzed indicate that the parental rock of the Muju amphibolite is tholeiitic basalt. The Sm-Nd amphibole-WR-plagioclase data define an isochron corresponding to $1766{\pm}121Ma$ ($1{\sigma}$) (MSWD=1.10) with an initial ratio of $0.51032{\pm}15$. We interpret this age as a metamorphic age of the Muju amphibolite. Tectonic discrimination diagrams clearly fail when they are applied to the Muju amphibolite probably due to compositional variations resulting from crustal contamination and/or degrees of partial melting.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.6
• /
• pp.284-288
• /
• 2005

We have systematically studied the superconducting properties and flux pinning enhancement of $(Y_{0.33}Sm_{0.33}Nd_{0.33})\;Ba_2Cu_3O_y$ [(YSN)-123] composite oxides by melt growth process in air. A sample prepared by this method showed well-textured microstructure, and $(Y_{0.33}Sm_{0.33}Nd_{0.33})\;BaCuO_5$ [(YSN)211] nonsuperconducting particles were uniformly dispersed in large (YSN) 123 superconducting matrix. The sample showed a sharp superconducting transition at 91 K. The magnetization measurements of the (YSN)-123 sample exhibited the enhanced flux pinning, compared with $YBa_2Cu_3O_y$ (Y-123) sample without Sm and Nd. Critical current densities of (YSN)-123 sample was $2.5{\times}10^4 A/cm^2$ at 2 T and 77 K.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.961-966
• /
• 1995

국내 상업적으로 운용증인 경수로 원자력 발전소중, 중기발생기의 건전성 유지를 위하여 보수 유지에 많은 비용을 소비하고 있다 특히 중기발생기 전열관으로 사용되는 inconel 600 재질에 많은 문제점이 발생되었다. 전열관 파손에 대한 보수 및 방지기술은 plugging, sleeving, shot penning, Ni-plating 등이 있다. 특히 최근에 개발된 고출력 Nd:YAG 레이저를 이용한 sleeving 보수 기술이 개발되었다. Nd:YAG 레이저를 이용한 보수 방식은 미국의 WH 및 일본의 MHI 등이 선정하여 실용화 단계에 있으며, 이는 광섬유로 전송이 가능한 Nd:YAG 레이저를 이용하여 원격으로 가공할 수 있는 기술이다. 현재 한국 원자력 연구소에서는 전열관 레이저 보수 용접에 대한 개념을 확립하고 장비 및 기구를 개발하였으며, 고리 1 호기 전열관규격에(7/8") 3/4" sleeve tube를 삽입하여 약 50 m 떨어진 곳으로부터 원격 레이저 용접을 실험실적 규모로 실증 하였다.모로 실증 하였다.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.6
• /
• pp.251-256
• /
• 2005

Directionally melt-textured high $T_c\;(Y_{0.5}Nd_{0.25}Sm_{0.25})Ba_{2}Cu_{3}O_y$ [(YNS)-123] superconductor was systematically investigated by the zone melt growth process in air. A sample prepared by this method showed well-textured microstructure, and $(Y_{0.5}Nd_{0.25}Sm_{0.25})_{2}BaCuO_5$[(YNS)211] inclusions were uniformly dispersed in large $(Y_{0.5}Nd_{0.25}Sm_{0.25})Ba_{2}Cu_{3}O_y$ [(YNS)123] matrix. High irreversibility field and magnetization hysteresis loop of the zone melt-textured (YNS)-123 sample exhibited the enhanced flux pinning, compared with $YBa_{2}Cu_{3}O_y$ (Y-123) sample without RE(rare earth). Critical current density of (YNS)-123 sample was $2.5{\times}10^4\;A/cm^2$ at 2 T and 77 K.