Flux Pinning Enhancement in $(Y_{0.5}Nd_{0.25}Sm_{0.25})Ba_{2}Cu_{3}O_y$ Oxides by Zone Melt Growth Process

  • Kim So-Jung (Dept. of Electrical and Electronic Engineering, Hanzhong University)
  • Published : 2005.12.01

Abstract

Directionally melt-textured high $T_c\;(Y_{0.5}Nd_{0.25}Sm_{0.25})Ba_{2}Cu_{3}O_y$ [(YNS)-123] superconductor was systematically investigated by the zone melt growth process in air. A sample prepared by this method showed well-textured microstructure, and $(Y_{0.5}Nd_{0.25}Sm_{0.25})_{2}BaCuO_5$[(YNS)211] inclusions were uniformly dispersed in large $(Y_{0.5}Nd_{0.25}Sm_{0.25})Ba_{2}Cu_{3}O_y$ [(YNS)123] matrix. High irreversibility field and magnetization hysteresis loop of the zone melt-textured (YNS)-123 sample exhibited the enhanced flux pinning, compared with $YBa_{2}Cu_{3}O_y$ (Y-123) sample without RE(rare earth). Critical current density of (YNS)-123 sample was $2.5{\times}10^4\;A/cm^2$ at 2 T and 77 K.

Keywords

References

  1. M. Murakami, S. I. Yoo, T. Higuchi, N. Sakai, M. Watanabiki, N. Koshizuka, and S. Tanaka, 'A new type of pinning center in melt grown Nd123 and Sm123,' Physica C, Vol. 235, pp. 2781-2782, 1994 https://doi.org/10.1016/0921-4534(94)92611-5
  2. S. Awaji, N. Isono, K. Watanabe, M. Muralidhar, M. Murakami, N. Koshizuka and K. Noto, 'High magnetic field transport properties of (Nd, Eu, Gd)$Ba_2Cu_3O_x$ bulk,' Supercond. Sci. Technol., Vol. 17, pp. S6-9, 2004
  3. M. Muralidhar, N. Sakai, M. Jirsa, and M. Murakami, 'Fabrication and characterization of $LRE_{1+x}Ba_{2-x}Cu_3O_y$(LRE: Nd, Eu, Gd, NEG) superconductors: a low oxygen partial pressure,' Physica C, Vol. 378, pp. 646-650, 2002 https://doi.org/10.1016/S0921-4534(02)01513-7
  4. P. McGinn, W. Chen, N. Zhu, M. Lanagan, and U. Balanchandran, 'Microstructure and critical current density of zone melt textured $YBa_2Cu_3O_{6+x}$,' Appl. Phys. Lett., Vol. 57, No. 14, pp. 1455-1457, 1990 https://doi.org/10.1063/1.104125
  5. F. Giovannelli, S. Marinel, and I. Monot-Laffez, 'Melt processing of (light rare earth)$Ba_2Cu_3O_y$ materials by the floating zone method,' Supercond. Sci. Technol., Vol. 15, pp. 533-538, 2002 https://doi.org/10.1088/0953-2048/15/4/309
  6. F. Giovannelli, S. Marinel, and I. Monot-Laffez, 'Properties of the ($Sm_{0.33}Eu_{0.33}Gd_{0.33}$)$Ba_2Cu_3O_y$ superconductor prepared by different process in air,' Supercond. Sci. Technol., Vol. 16, pp. 444-450, 2003 https://doi.org/10.1088/0953-2048/16/4/304
  7. A. Ubaldini, F. Giovannelli, and I. Monot-Laffez, '$(RE_{0.33}Eu_{0.33}Gd_{0.33})Ba_2Cu_3O_y$ bars processed in air,' Pysica C, Vol. 33, pp. 107-116, 2002
  8. M. Murakami, S. Gotoh, H. Fujimoto, K. Yamaguchi, N. Koshizuka, and S. Tanaka, 'Flux pinning and critical currents in melt processed YBaCuO superconductors,' Supercond. Sci. Technol., Vol. 4, pp. S43-50, 1991 https://doi.org/10.1088/0953-2048/4/2/001
  9. S. Nariki, N. Sakai, M. Murakami, and I. Hirabayashi, 'High critical current density in Y-Ba-Cu-O bulk superconductors with very fine Y211 particles,' Supercond. Sci. Technol., Vol. 17, pp. S30-35, 2004 https://doi.org/10.1088/0953-2048/17/2/057
  10. C. J. Kim, H. W. Park, K. B. Kim, and G. W. Hong, 'New method of producing fine $Y_2BaCuO_5$ in the melt-textured Y-Ba-Cu-O system: attrition milling of $YBa_2Cu_3O_y-Y_2BaCuO_5 $powder and $CeO_2$ addition prior to melting,' Supercond. Sci. Technol., Vol. 8, pp. 652-659, 1995 https://doi.org/10.1088/0953-2048/8/8/009
  11. M. P. Delamare, M. Hervieu, J. Wang, J. Provot, I. Monot, K. Verbist, and G. Van Tendeloo, 'Combination of $CeO_2$ and $PtO_2$ doping for strong enhancement of $J_c$ under magnetic field in melttextured superconductor YBaCuO,' Physica C, Vol. 262, pp. 220-226, 1996 https://doi.org/10.1016/0921-4534(96)00225-0
  12. E. M. Gyory, R. B. van Dover, K. A. Jacson, L. F. Schneemeyer, and J. V. Waszczak, 'Anisotropic critical currents in $Ba_2YCu_3O_7$ analyzed using an extended Bean model,' Appl. Phys. Lett., Vol 55, No. 3, pp. 283-285, 1989 https://doi.org/10.1063/1.102387
  13. M. R. Koblischka, M. Muralidhar, and M. Murakami, 'Flux pinning sites in melt-processed ($Nd_{0.33}Eu_{0.33}Gd_{0.33}$)$Ba_2Cu_3O_y$ superconductors,' Physica C, Vol. 337, pp. 31-38, 2000 https://doi.org/10.1016/S0921-4534(00)00051-4
  14. M. Muralidhar, N. Sakai, Y. Wu, M. Murakami, M. Jersa, T. Nishizaki, and N. Kobayashi, 'Excess of Eu in the $(Nd_{0.33}Eu_{0.33+x}Gd_{0.33-x})Ba_2Cu_3O_y $ system: the way to a high irreversibility field at 77 K,' Supercond. Sci. Technol., Vol. 15, pp. 1357-1363, 2002 https://doi.org/10.1088/0953-2048/15/9/315
  15. N. Ihara and T. Matsushita, 'Effect of flux creep on irreversibility lines in superconductors,' Physica C, Vol. 257, pp. 223-231, 1996 https://doi.org/10.1016/0921-4534(95)00534-X