• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.3
• /
• pp.231-237
• /
• 2003

RE(Nd, Sm) elements doped (RE/Y)$_{1.8}$B $a_{2.4}$C $u_{3.4}$$O_{7-x}$ [(RE/Y)1.8] high $T_{c}$ superconductors were directionally grown by Top Seed Melt Growth(TSMG) process in air atmosphere. The (001)melt-textured N $d_{1.8}$B $a_{2.4}$C $u_{3.4}$ $O_{7-X}$(Nd1.8) seed crystals were used for achieving the c-axis alignment large grains perpendicular to surface of the samples. The (RE/Y)1.8 SEM micrographs of the melt-textured (RE/Y)1.8 samples revealed that the nonsuperconducting (RE/Y)211 inclusions are uniformly distributed in the superconducting (RE/Y)123 matrix except the region very close to the Nd seed crystal. The microstructure and superconducting properties were investigated by XRD, SEM, TEM and SQUID magnetometer. The Melt-textured (RE/Y)1.8 samples showed an onset $T_{c}$=91K and sharp superconducting transition. Also, the magnetization value of the (RE/Y)1.8 samples were compared with those of Y1.8 sample at 77 K. 77 K. 77 K. 77 K.K.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2004.06a
• /
• pp.73-86
• /
• 2004

The purpose of this study is the identification of (N-2-hydroxy-3-butenyl) valine(HBVal adduct) and (N-2,3,4-trihydroxy-butyl)valine(THBVal adduct)with mice inhalation exposure with 1,3-butadiene for 3 weeks($6\;hr/day\;{\times}\;5\;days/week$). Body weights were significantly lower from 4 or 9 exposure post-day in 1000 or 500ppm inhalation group than in control. The levels of HBVal adducts are 1.8, 3.7 and 6.2 pmol/mg globin in $1^{st}$, $2^{nd}$ , and $3^{rd}$ week for 500 ppm 1,3-butadiene(BD), and 5.7, 7.4 and 16.0 pmol/mg globin in $1^{st}$, $2^{nd}$ , and $3^{rd}$ week for 1000 ppm BD inhalation exposure. The levels of THBVal adducts are 32.0, 42.0 and 55.0 pmol/mg globin in $1^{st}$, $2^{nd}$ , and $3^{rd}$ week for 500 ppm BD, and 67.8, 72.7 and 83.5 pmol/mg globin in $1^{st}$, $2^{nd}$ , and $3^{rd}$ week for 1000 ppm BD inhalation exposure. Their ratios of THBVal and HBVal adducts are higher at earlier exposure and lower concentration. They are17.8, 11.4 and 8.87 in $1^{st}$, $2^{nd}$ , and $3^{rd}$ week for 500 ppm BD, and 11.9, 9.8 and 5.2 in $1^{st}$, $2^{nd}$ , and $3^{rd}$ week for 1000 ppm BD inhalation exposure. In conclusion, THBVal and HBVal adducts are a important hemoglobin adduct for monitoring of BD exposure, and the latter is more biomarker than the other.

• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.244-248
• /
• 1994

Magnetic and Magneto-optical characteristics of NdTbFeCo alloy films and NdTbFeCo/TbFeCo double-layered films have been investigated. It was observed that the Kerr rotation(${\theta}_{k}$) in the short wavelength region increased and the coercivity decreased as the substitutional amount of Nd for Tb in NdTbFeCo film at the constant FeCo content. In spite of the increased ${\theta}_{k}$, a small coercivity of NdTbFeCo film made this medium unsuitable for magneto-optical recording medium at short wavelength. An effort was made to improve coercivity by exchange coupling with TbFeCo film of high coercivity. In the exchange-coupled $Nd_{16.9}Tb_{15.2}Fe_{50.4}Co_{17.5}(150\;{\AA})/Tb_{21.1}Fe_{65.0}Co_{13.9}(300\;{\AA})$ double-layered film, the magnetization reversal switching field and the Kerr rotation angle were increased to about 6.0 KOe and $0.32^{\circ}$ at 500 nm, respectively. This result indicates that exchange-coupled NdTbFeCo/TbFeCo film can be a promising candidate for agneta-optical rerding medium short wavelenhth.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.6 no.1
• /
• pp.77-91
• /
• 2000

Recent changes in health problems as well as the health delivery system demand expanding nursing roles to improve quality care and at the same time provide cost-effective health services. Nursing leaders of the future will be expected to be excellent care givers who are well prepared as researchers and managers and administrators. The purpose of developing an ND program is to train nursing leaders for the future. The program objective are to demonstrate the role as 1) an advanced practitioner who will provide theory based practice 2) a researcher and manager The target population of the ND program is as follows : 1) Nurses with a BSN degree who are seeking to advance on the career ladder 2) Non-nursing BS, BA graduates who are seeking nursing as a second career 3) Transfer students who are mature and motived to be nursing leaders It is believed that the ND program would meet the diverse needs for potential students, for their role in nursing and the health delivery system and create a meaning and challenging position in the profession of nursing. A task force team was organized to develop the ND program and its activities are as follows; 1) Information on ND programs were collected from 3 universities and reviewed 2)An advanced education needs assessment was completed and it was found that 87.6% of the subjects responded positively about advanced degree work. 3) A tentative curriculum for an ND program was developed. It is a great challenge to develop a new program for nursing however, it is also our task and responsibility to further the development of nursing.

• Proceedings of the Optical Society of Korea Conference
• /
• 1999.08a
• /
• pp.198-199
• /
• 1999

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.4
• /
• pp.532-537
• /
• 2003

Statement of the problem : IPS Empress ceramic has been used as one of a esthetic restorative material since it's development, but the broad application of IPS Empress ceramic to clinical prosthodontic field has been limited by its high material cost. Purpose : This study was investigated to evaluate the hardness and fracture toughness after recycling of the IPS Empress ceramic. Material and methods : Reused specimens of IPS Empress were fabricated with repeated pressing. The hardness(Vickers hardness) and fracture toughness of 1st, 2nd and 3rd pressed specimens were measured with Digital Micro Hardness Tester(Model MXT70, Matsuzawa Seiki Co., Ltd, Tokyo, Japan). The obtained data were analyzed using SPSS(Ver 9.5). Result : The mean value of the hardness in the 1st, 2nd and 3rd pressed Empress were $6.23{\pm}0.48MPa,\;5.50{\pm}0.25MPa$, and $5.70{\pm}0.42MPa$. The hardness of the 1st pressing ceramic was higher than those or the 2nd and 3rd pressed ceramics(P<0.05). Hardness of the 3rd pressed ceramic was greater than that of the 2nd pressed ceramic. but there was no significant difference of hardness between those two(P>0.05). The mean value of the fracture toughness was $1.71{\pm}0.16MPam^{1/2}$ in 1st pressed ceramic, $1.78{\pm}0.10MPam^{1/2}$ in 2nd pressed and $1.73{\pm}0.14MPam^{1/2}$ in 3rd pressed IPS ceramic. Fracture toughness of the 2nd pressed ceramic was the highest and that of the 1st pressed ceramic was the lowest. There was no significant difference of fracture toughness among them(P>0.05). Conclusion : Hardness of the 2nd and 3rd pressed IPS Empress ceramics were lesser than that of 1st pressed IPS Empress ceramic(P<0.05), but there was no significant changes of fracture toughness among them(P>0.05).

• Electrical & Electronic Materials
• /
• v.10 no.9
• /
• pp.901-908
• /
• 1997

The microwave dielectric properties of (Na.$_{1}$2//Sm$_{1}$2/)TiO$_3$and (Li$_{1}$2//Nd$_{1}$2/)TiO$_3$ceramics were investigated. Dielectric constant quality factor and temperature coefficient of resonant frequency of (Li$_{1}$2//Nd$_{1}$2/)TiO$_3$ceramics sintered at 145$0^{\circ}C$ for 2 hours were 86.2, 2780(at 3.8GHz) and 215ppm/$^{\circ}C$respectively. The solid solution of X(Na.$_{1}$2//Sm$_{1}$2/)TiO$_3$-(1-X)(Li$_{1}$2//Nd$_{1}$2/)TiO$_3$increased delectric constant and quality factor were decreased. Whereas temperature coefficient of resonant frequency was optimized to zero at the composition of 0.6(Li$_{1}$2//Sm$_{1}$2/)TiO$_3$-0.4(Li$_{1}$2//Nd$_{1}$2/)TiO$_3$where dielectric constant and quality factor were 86.2, 95-(at 3.8GHz) respectively. Also band-pass filters made of this material were examined.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.6
• /
• pp.538-544
• /
• 1985

This study was carried cut to evaluate the water quality of spring waters in Pusan area(see Fig. 1). In this experiment, twenty-five water samples were collected from 5 stations from December 1983 to August 1984. Range and mean values of constituents of the samples are as follows: pH $5.80{\sim}7.25$, 6.60; water temperature $6.0{\sim}23.0^{\circ}C,\;12.9^{\circ}C$; total residue $33.0{\sim}325mg/l$, 121.2mg/l; alkalinity $4.75{\sim}51.6mg/l$, 24.1mg/l; hardness $9.47{\sim}85.0mg/l$, 30.3mg/l; electrical conductivity $0.495{\sim}2.750{\times}^2{mu}{\mho}/cm,\;1.239{\times}10^2{\mu}{\mho}/cm$;turbidity $0.54{\sim}7.80$NTU, 2.04NTU; $KMnO_4$ consumed $0.51{\sim}8.47mg/l$, 1.96mg/l; chloride ion $4.91{\sim}36.0mg/l$, 12.55mg/l; fluoride ion ND-0.30ppm, 0.08ppm; nitrate-nitrogen ND-8.94mg/l, 1.94m:g/l; nitrite-nirogen ND-0.10mg/l, 0.03mg/l; ammonia-nitrogen ND-0.16mg/l, 0.03mg/l: phosphate-phosphorus ND-0.09mg/l, 0.03mg/l; silicate-silicious $0.42{\sim}22.7ng/l$, 7.96mg/l; copper ND-10.5ppb, 2.46ppb; lead ND-22.7ppb, 3.54ppb; zinc ND-103ppb, 21.33ppb; iron $20.3{\sim}2,800ppb$, 801.72ppb, respectively. Arsenic, cyan, cadmium, manganese, mercury, chrome and phenol were not detected. Total residue, electrical conductivity, turbidity and chloride ion of station 1 (Milrakdong) were higher than others as 178.1mg/l, $2.127{\times}10^2{\mu}{\mho}/cm$, 3.16NTU and 16.32mg/l. The concentration of silicious had a great influence on precipitation. The concentration of fluoride ion of spring waters was lower as 0.08ppm than the criterion for drinking water as 1ppm, while iron was exceed 2.7 times as 801.72ppb.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.21-30
• /
• 2005

The purpose of this study is helps to make full use for perfect performance by grasping the defects of Tichonkich motion performed by athlete CSM For this, the study analyzed kinematical variables through Tichonkich motions performed at the first selection competition(1st trial) and final selection competition(2nd trial) for the dispatch to the 28th Athens Olympic Games using the three-dimensional cinematographical method with a high-speed video camera, and obtained the following results. 1. During Tichonkich motion, the execution time of up swing and the right hand moving to the left bar was shorter in the 2nd trial than the 1st one, while the execution time of down swing, the support of the left bar and the right hand moving to the right bar was longer in the 2nd trial than the 1st trial. 2. The horizontal position of COG in the 2nd trial was -35cm in the 1st stage, 42cm in the 3rd stage and 29cm in the 4th stage, that is, it showed a great swing focused on the circular movement compared to the 1st trial, while the vertical position of COG was -59cm in the 2nd stage, that is, it showed a small swing focused on a up and down movement. Also the 5th stage vertical position was 98cm, and the 6th stage vertical position was 95cm in the 2nd trial which were higher than those of the 1st trial, so it has provided magnificence required in the modern gymnastics. 3. And it was indicated that the horizontal velocity at the down swing phase proceeded forward more rapidly in the 2nd trial than that in the 1st trial, and the reverse ascent made a rapid vertical rise lessening left and right velocity change. And in the 5th stage, the 2nd trial was kept very slower in horizontal, vertical and left and right velocity that in the 1st trial, so it reached a handstand with leisurely movement. 4. In the 2nd trial, shoulder joint of the 1st, 2nd, 3rd stages kept a larger angle than that in the 1st trial, that is, it made a great swing while in the 1st trial, it showed a swing movement dependent on kick movement by the flexion and extension of hip joint. Also in the 2nd trial, the body formed a vertical posture with both hands supporting the left bar and hip joint was kept larger as $198^{\circ}$ and $190^{\circ}$ in the 5th and 6th stage than that in the 1st trial, so it made a handstand with the body uprightly stretched out, and magnificent and stable movement.

• Journal of Magnetics
• /
• v.9 no.2
• /
• pp.27-33
• /
• 2004

Magnetic properties of $Nd_4Fe_{77.5}B_{18.5}$ compound in term of exchange coupling between $Nd_2Fe_{14}B$ and $Fe_3B$ magnetic nano crystals in melt spun powders were characterized by varying the quenching speed in mass production line. The exchange coupled phenomenon was characterized as functions of nano crystal size and volume fraction of each magnetic phase which was possible by employing Henkel plot (${\delta}M$) and refined Mossbauer spectroscopy. The optimized magnetic properties obtained from the present volume production line were: $B_r= 11.73 kG,{_i}H_c/ = 3.082 kOe$, and $(BH)_{max} = 12.28 MGOe.$ The volume fraction of each magnetic phase for those conditions giving the grain size of 10 nm were ${\alpha}-Fe; 4.2%, Fe_3B; 60.1 %$, and $Nd_2Fe_{14}B; 35.7%$. The superior magnetic properties in the $Nd_2Fe_{14}Fe_3B$ based nanocomposites were confirmed to be dependant on the volume fraction of $Fe_3B$.