• Korean Journal of Computational Design and Engineering
• /
• v.13 no.2
• /
• pp.139-152
• /
• 2008

In order to survive worldwide competition, today's industries are experiencing strong pressure to introduce higher quality products with lower cost and shorter lead-time. Therefore, the role of design in the process of product development is increasing in significance. In this research, two methods for improving the design capability are proposed: construction of design environment and design automation using 3D CAD system. The designers and design process are the core of product design using 3D CAD system. In order to maximize the design performance, construction of the design environment including selection of a suitable system, designer training for best use of the system, establishment of an efficient design process, and stabilization of the environment are required. A method is suggested to construct design environment by systematizing the contents of the projects and consulting experiences carried out for various categories of business such as electronic devices, motorcycles, electricity parts, sanitary wares, injection molds, and die casing molds. Design automation helps reduce tedious and time-consuming jobs, simplify complicated and error-prone modeling and drawing works to shorten the lead time and improve the product quality. To develop a design automation system, understanding the process and the related knowledge on design are very important before implementing the system using API provided by 3D CAD system. In this research, an eight-step procedure is proposed for the development of a design automation system. These eight steps are analysis of needs, determination of specification, verification of specification using 3D CAD system, inspection of related API functions, programming, field test, application in practice, and maintenance. A case study in which five design automation systems in the design of turbine generators using the proposed method is introduced in detail. These systems play important roles in the generation of various output items including 3D models, drafts, material information, and NC data. The case study shows how effectively the design time is reduced and the quality improved using those systems.

• The Journal of the Korea Contents Association
• /
• v.14 no.9
• /
• pp.651-662
• /
• 2014

The introduction and application of NCS(National Competency Standards) into college education seeks for competency-based human resource development and management, which targets what to do rather than what to know in terms of employees' performing jobs, duties and tasks in their work environments. The focus of the study is to redesign an educational curriculum of the field of Advertising Production for college students from a perspective of NCS. The field of Advertising Production related competency unit groups, competency units and competency elements were selected followed by the process of developing the curriculum. Using survey questionnaires and FGIs, data were collected from advertising industry experts, field practitioners and college students. The redesigned NCS-based curriculum is expected to link college education into industrial needs for human resources and thus to enhance the quality of college education.

• Korean Medical Education Review
• /
• v.20 no.1
• /
• pp.44-50
• /
• 2018

The purpose of this study was to investigate factors associated with the critical thinking ability of nursing students at the individual and school levels. The study adopted a descriptive design and recruited 465 nursing students from four nursing schools from November 2014 to September 2015 through convenience sampling. The Clinical Critical Thinking Skill Test was used to measure critical thinking ability, and the data were analyzed with the SAS ver. 9.4 program (SAS Institute Inc., Cary, NC, USA) for descriptive statistics, t-test, analysis of variance, and multi-level model. The results showed that clinical practicum experience (${\beta}=-0.72$, p=0.025), taking critical thinking courses (${\beta}=0.63$, p=0.010), and taking simulation courses (${\beta}=0.56$, p=0.035) improved critical thinking ability in the individual level model. In the school level model, the interaction effect between the years of clinical practice done by the student and the presence of full-time clinical instructors was significant (${\beta}=1.29$, p=0.011). These results suggest that critical thinking ability improves with the more years of clinical practice individual nursing students have, and this improvement is greater with the presence of full-time clinical instructors in the school. Therefore, it is recommended that nursing students undergo critical thinking and simulation courses to develop their critical thinking ability, and dedicated clinical instructors in nursing schools should play a vital role.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.163-166
• /
• 2006

The field of medical images has been digitalized as the development of computer and the digitalization of the medical instruments. As a result it causes a lot of problems such as an illegal copy related to medical images and property right of the medical images. Therefore, digital watermarking is used for discrimination whether the data are modified or not. It is also used to protect both the property right of medical images and the private life of many patients. The proposed theories, the Non-blind and the Blind method, have two problems. One is needed an original image and the other is using a gaussian watermarking. This paper proposes the new Blind Watermarking using binary images in order to easily recognize the results of watermark. This algorithm is described that an watermark of a binary image is wavelet-transformed, and then a transformed watermark is inserted in medium-band of frequency domains of original image by the Circular Input method. The propose method presented the good performance of over 0.97 in NC.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.9
• /
• pp.167-173
• /
• 2004

The heterodyne He-Ne laser interferometer is the most widely used sensing unit to measure the position error. It measures the positioning error from the displacement of a moving reflector in terms of the wave length. But, the wave length is affected by the variation of atmospheric temperature. Temperature variation of 1$^\circ C$ results in the measuring error of 1ppm. In this paper, for measuring more accurately the position error of the ultra precision stage, the refractive index compensation method is introduced. The wave length of the laser interferometer is compensated using the simultaneously measured room temperature variations in the method. In order to investigate the limit of compensation, the stationary test against two fixed reflectors mounted on the zerodur$\circledR$ plate is performed firstly. From the experiment, it is confirmed that the measuring error of the laser interferometer can be improved from 0.34${\mu}m$ to 0.11${\mu}m$ by the application of the method. Secondly, for the verification of the compensating effect, it is applied to estimate the positioning accuracy of an ultra precision aerostatic stage. Two times of the refractive index compensation are performed to acquire the positioning error of the stage from the initially measured data, that is, to the initially measured positioning error and to the measured positioning error profile after the NC compensation. Although the positioning error of an aerostatic stage cannot be clarified perfectly, it is known that by the compensation method, the measuring error by the laser interferometer can be improved to within 0.1${\mu}m$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.6
• /
• pp.815-825
• /
• 2019

Objective: To effectively use corn stover resources as animal feed, the changes in microbial population and chemical composition of corn stover during field exposure, and their silage fermentation and in vitro digestibility were studied. Methods: Corn cultivars (Jintian, Jinnuo, and Xianyu) stovers from 4 random sections of the field were harvested at the preliminary dough stage of maturity on September 2, 2015. The corn stover exposed in the field for 0, 7, 15, 30, 60, 90, and 180 d, and their silages at 60 d of ensiling were used for the analysis of microbial population, chemical composition, fermentation quality, and in vitro digestibility. Data were analyzed with a completely randomized $3{\times}6$ [corn stover cultivar $(C){\times}exposure$ d (D)] factorial treatment design. Analysis of variance was performed using SAS ver. 9.0 software (SAS Institute Inc., Cary, NC, USA). Results: Aerobic bacteria were dominant population in fresh corn stover. After ensiling, the lactic acid bacteria (LAB) became the dominant bacteria, while other microbes decreased or dropped below the detection level. The crude protein (CP) and water-soluble carbohydrate (WSC) for fresh stover were 6.74% to 9.51% and 11.75% to 13.21% on a dry matter basis, respectively. After exposure, the CP and WSC contents decreased greatly. Fresh stover had a relatively low dry matter while high WSC content and LAB counts, producing silage of good quality, but the dry stover did not. Silage fermentation inhibited nutrient loss and improved the fermentation quality and in vitro digestibility. Conclusion: The results confirm that fresh corn stover has good ensiling characteristics and that it can produce silage of good quality.

• International Area Studies Review
• /
• v.15 no.1
• /
• pp.107-133
• /
• 2011

This paper aims to analyze the causal relationships between agricultural exports and economic growth in the U.S. economy by 50 states. Using the annual data from 1973 to 2007, the theoretical methodologies based on the export-led growth (ELG) model under the static model, the impulse response function (IRF) and forecast error variation decomposition (FEVD) under the vector autoregressive (VAR) model, and the Granger causality test. The results show the causal relationship between agricultural exports and economic growth at the states' level. Especially, the ELG hypothesis is strongly supported in the case of 16 states (HI, ID, KS, MD, MI, MN, NJ, NC, ND, OK, OR, RI, SD, TX, WA, and WI) and is also weakly supported in the case of 31 states. Therefore, the agricultural exports are important factor of developing in the U.S. economy, and furthermore some states (located in coastal area and breadbasket) indicate the strong evidence for agricultural exports-led growth.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.210-210
• /
• 2022

Silybum marianum is an annual or biennial plant from the Asteraceae family. It can grow in low-nutrient soil and drought conditions, making it easy to cultivate. From the seed, a specialized plant metabolite called silymarin (flavonolignan complex) is produced and is known to alleviate the liver from hepatitis and toxins damages. To infer the phylogenetic placement of a Korean milk thistle, we conducted a chloroplast assembly and annotation following by a comparison with existing Chinese reference genome (NC_028027). The chloroplast genome structure was highly similar with an assembly size of 152,642 bp, an 153,202 bp for Korean and Chinese milk thistle respectively. Moreover, there were similarities at the gene level, coding sequence (n = 82), transfer RNA (n = 31) and ribosomal RNA (n = 4). From all coding sequences gene set, the phylogenetic tree inference placed the Korean cultivar into the milk thistle clade; corroborating the expected tree. Moreover, an investigation the tree based only on the ycf1 gene confirmed the same tree; suggesting that ycf1 gene is a potential marker for DNA barcoding and population diversity study in milk thistle genus. Overall, the provided data represents a valuable resource for population genomics and species-centered determination since several species have been reported in the Silybum genus.

• Journal of dental hygiene science
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2012

This study was practiced to provide basic data which is necessary for ethical education of dental hygiene students by comparing the bioethical perception between dental hygiene students and non-health students. Questionnaire surveys were conducted for 778 students in two universities in Gyeonggi-Do province and analyzed the collected data with SAS 9.2. The findings of the study were as follows : 1. there was no stastistical difference in the degree of bioethical perception between dental hygiene students and non-health students. 2. Students who have family member in medical field were more conscious of bioethics than students who doesn't. According to religion, the protestants were most conscious and no-religions scored the lowest. 3. In case of dental hygiene students, female was more conscious. According to religion, there were statistical differences between the Catholic and Buddhism, the Catholic and No-religion. 4. Dental hygiene students were more strongly opposed to let infant with fatal congenital disease die than non-health students. 5. Dental hygiene students were more strongly opposed to rejecting organ transplant, trade in human organs and using alternative organ of animal. Also, they estimated higher the possibility of medical irrationalities due to trade in human organs. From these results, a curriculum for bioethical education in department of dental hygiene should be developed to form and improve the more desirable bioethical perception of dental hygiene students.

• Health Policy and Management
• /
• v.25 no.1
• /
• pp.40-52
• /
• 2015

Background: The purpose of this study was to analyze the increase in Grade of Nursing Management Fee of medical institutions and establish a reasonable government policy by examining which factors affect the increase of nurse staffing. Methods: Analyzing data collected from the Health Insurance Review & Assessment Service resource management department with targets of 1,104 medical institutions. The study period was 5 years from June 30, 2008 to June 30, 2013. SAS ver. 9.2 (SAS Institute Inc., Cary, NC, USA) was used for statistical analysis. The data was analyzed by a chi-square test and also conducted muiltivariate logistic regression analyses for variables of basic characteristics, human resource characteristics, and material resources. Results: Adjusted odds ratio (AOR) of the rise in Grade of Nursing Management Fee among other hospitals compared to hospitals owned by government or universities was 0.264. The AOR in hospitals established after November 2006 compared to those before June 1995 was 2.383. The AOR in Gangwon, Chungcheng South, and Jeolla South Provinces compared to Seoul was 0.084, 0.036, and 0.194, respectively. The AOR in hospitals with more than 6.75 specialists per 100 beds compared to those with less than 6.75 specialists per 100 beds was 7.514. The AOR in hospitals with more than 17.48 nurse per 100 beds compared to those with less than 17.48 nurse per 100 beds was 3.300. The AOR in hospitals with 50% to 75% bed utilization, 75% to 90% bed utilization and more than 90% bed utilization compared to those with less than 50% bed utilization was 5.428, 9.884, and 10.699, respectively. The AOR in hospitals with one magnetic resonance imaging (MRI) and more than two MRI compared to those with no MRI was 2.018 and 2.942, respectively. Conclusion: This result has showed policies to induce the rise in Grade of Nursing Management Fee among old hospitals and the incentive system for local medical institutions are needed. Also we need to develop a governmental policy for medium-small hospitals with low operation rate of beds and insufficient medical personnel and number of equipment in hospitals.