• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 제2회 박판성형심포지엄 논문집 박판성형기술의 현재와 미래
• /
• pp.57-64
• /
• 1998

The purpose of this research is to develop a CAD/CAM system for generation all kind of information such as, total drawing, sub assembly drawing, part drawing, detail drawing, part list, and NC data for machining by CNC lathe, Wire CUT, machining center. Through this study the CAD/CAM System for deep drawing transfer die in mechanical press process has been developed. The developed CAD system can generate the drawing of transfer die in mechanical press. Using these results from CAD system, it can generate the NC data to machine die's elements on the CAD system. This system can reduce design man-hours and human errors. In order to construct the system, it is used to automate the design process using knowledge base system. The developed system is based on the knowledge base system which is involved a lot of expert's technology in the practice field. Using AutoLISP language under the AutoCAD system, CTK customer language of SmartCAM is used as the overall CAD/CAM environment. Results of this system will be provide effective aids to the designer and manufacturer in this field.

• The Journal of Advanced Prosthodontics
• /
• 제13권1호
• /
• pp.65-70
• /
• 2021

Purpose. Implant mechanical complications, including screw loosening, can influence dental implant success. It has been shown that torque values are affected by contamination occurred in implant-abutment (I/A) interface. This study aimed to examine the effects of blood, saliva, fluoride and chlorhexidine contamination on reverse torque values (RTVs) of abutment screws in oral conditions. Materials and Methods. 50 fixtures were mounted into the stainless-steel holders and divided into five groups (n = 10). Except control group (NC), fixture screw holes in other groups were contaminated with chlorhexidine (CG), saliva (SG), blood (BG), or fluoride (FG). Abutment screws were tightened with a digital torque meter. I/A assemblies were subjected to thermocycling and cyclic loading. The mean RTVs were recorded and data were analyzed with one-way ANOVA and Tukey test. Results. Except for specimens in SG (20.56 ± 1.33), other specimens in BG (21.11 ± 1.54), CG (22.89 ± 1.1) and FG (24.00 ± 1.12) displayed significantly higher RTVs compared to NC (19.00 ± 1.87). The highest RTVs were detected in CG and FG. Conclusion. The obtained data robustly suggest that RTVs were significantly affected by fluid contaminations. Specimens in FG and CG displayed the highest RTVs. Therefore, clinicians should have enough knowledge about probable contaminations in I/A interface in order to manage them during clinical procedure and to inform patients about using oral care products.

• 한국전산응용수학회:학술대회논문집
• /
• 한국전산응용수학회 2003년도 KSCAM 학술발표회 프로그램 및 초록집
• /
• pp.3.2-3
• /
• 2003

We propose a method of surface extension method using several functions. Interpolation theory is well developed in curve and surface. But extrapolation theory is not well developed because it is not unique outside the useful domain. It requires continuous, first derivative, second derivative continuous extension for matching in NC(Numerical Control) machine. In the past, we generate data outside the useful area and refit those data using least squares method. this has some problems which have some errors within the useful area. We keep the useful area and extend the unuseful area by a function

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.273-278
• /
• 1988

This paper represents the computer application techniques of initial and modification machining for dies with 3-dimensional scluptured surfaces. All procedures from die design to die machining and measurement are covered. The component of modelling is data management and modification (extrapolation and smoothing), surface modelling, and nc program preparation. Also this paper introduces the utility for successful and efficient operation of system such as map generation, data communication, tool path verification, contour map generation, graphic processing of extrapolation and smoothing results, and CAD/CAM system interface. Examples are given to illustrate the modelling.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.76-81
• /
• 1998

The purpose of this study is the generation of B-spline surface by the 3D measurement data. The hardware of the system comprises PC and digitizing machine, machining center. There are three steps, (1) physical model measuring on the 3D laser digitizing machine, (2) B-spline surface modeling and Fairing, (3) CNC machining by the NC code. It is developed a software package, with which can conduct a micro CAM system in the PC without economical burden.

• 한국컴퓨터정보학회논문지
• /
• 제25권11호
• /
• pp.229-238
• /
• 2020

4차 산업혁명의 도래와 포스트 코로나는 국내외 국가들의 정보통신기술(ICT) 시대를 앞당겨 대학의 교육과정·교육내용·교육방법에 대한 혁신적인 변화를 가져오고 있다. 본 논문은 최근 4년(2016.6~2020.5)간 한국언론진흥재단의 BigKinds와 네이버의 DataLab 시스템을 이용하여 대학의 교육과정 변화에 대해 분석하였다. '대학 교육과정 혁신·창의·융합'의 키워드로 검색된 633건의 관계도 분석, 월별 키워드 트렌드, 연관어 분석으로 다음의 3가지 결과를 도출하였다. 첫째, 관계도 분석결과 최근 4년(2016~2020)간 빈도수(1~7위)는 교육부(190), 산업혁명(154), 시스템(137), 진로(136), 글로벌(131), 스마트(97), 재학생(95)순이었다. 둘째, 연관어 키워드 빈도수로는 인재양성(136), 산학협력(119), 교육부(86), 특성화(69), LiNC(62) 순으로 대학의 인재양성을 위해서는 정부(교육부)의 지원과 인재양성, 산학협력, LiNC, 특성화의 중요성을 보여 주었다. 본 연구 결과 교육의 패러다임은 4차 산업혁명의 인공지능 환경으로 특성화·산학협력·스마트·글로벌화의 방향과 4차 산업혁명 시대의 창의인재를 육성하는 미래의 교육방향을 제시하는데 의의가 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권1호
• /
• pp.97-101
• /
• 2006

Certain amino acids are essential precursors of a variety of important biomolecules in addition to their major function as protein building blocks. ${\delta}$-Aminolevulinic acid (ALA) is synthesized from the condensed form of succinyl-CoA with glycine after decarboxylation catalyzed by ALA synthase. The objective of the study was to determine the effects of ALA supplementation on growth performance, behavioral characteristics and hematological/immune status in nursery pigs. A total of 144 pigs weaned at 21 d of age were allotted to three dietary treatments representing (-) control (w/o antibiotics; NC), (+) control (w/carbadox at 50 mg/kg; PC), and the treatment group with ALA supplementation (0.05%; TA). Each treatment had 6 pens (replicates) with 8 pigs per pen. Pigs were fed phase 1 (21.9% CP, 1.40% Lys) and 2 (20.6% CP, 1.15% Lys) experimental diets for 3 and 2 wks, respectively. Feed intake and weight gain were measured weekly during phase 1 and at the end of phase 2. At the end of phase 2, blood samples were taken and analyzed using an automated hematology analyzer. Skin color and activity of pigs (48 h) from all pens in each treatment were measured at the second week of phase 2. Growth performance was not affected (p>0.05) by the dietary supplementation of ALA during the 5 wk nursery period. Pigs in the TA (6.46) and PC (6.68) had a higher (p<0.05) number of red blood cells ($10^6cell/{\mu}L$) than pigs in the NC (6.15). Pigs in PC (12.16) had a higher (p<0.05) hemoglobin level (g/dL) than pigs in the NC group (11.29) and the TA group (11.47). Pigs in the TA and PC had darker (p<0.05) and less (p<0.05) yellow skin color than pigs in the NC. Pigs in the PC tended (p = 0.081) to be less active than pigs in the other groups. There were no differences in behavioral characteristics between the NC and the TA. The data suggest that ALA supplementation has no adverse effects on growth performance of nursery pigs. Moreover, ALA supplementation increased red blood cell counts which may be beneficial to pigs.

• Journal of Nutrition and Health
• /
• 제39권6호
• /
• pp.520-528
• /
• 2006

Free amino acids in epidermis function as a major component of Natural Moisturizing Factor (NMF), which maintains the optimal level of water in skin even at the low humidity. In fact, the depletion of free amino acids is reported in the epidermis of atopic dermatitis, the skin condition involving dryness. As an effort searching the dietary source for improving the level of water and free amino acid in epidermis, the dietary effects of silk protein, sericin (S) and fibroin (F) on trans epidermal water loss (TEWL), and plasma and epidermal levels of free amino acids were compared in this study. Thirty of male NC/Nga mice, an animal model of atopic dermatitis, were divided into three groups: group CA as an atopic control with control diet, group S: 1% sericin diet and group F: 1% fibroin diet. Ten of male BALB/c mice were served as group C (control group) with control diet. All mice were fed on diet and water ad libitum for 10weeks. Dry skin condition was established in group CA as TEWL was increased (148.7% of group C). In parallel, epidermal level of glutamate, one of major amino acids functioning as NMF, was dramatically decreased and epidermal levels of methionine and alanine were inversely elevated. Dietary supplementation of sericin (group S) reduced TEWL at the similar level with group C and increased epidermal levels of glutamate as well as serine and glycine, the other major amino acids as NMF. Despite a marked decrease of methionine and alanine, the reduction of TEWL and epidermal levels of glutamate, serine and glycine of group F were less than of group S. Furthermore, in contrast to similar levels of other free amino acids in plasma and epidermis of group S and group C, plasma and epidermal levels of other free amino acids, specifically phenylalanine, isoleucine, cysteine and tyrosine in epidermis of group F, were significantly higher than of group C. Together, our data demonstrate that dietary supplementation of sericin is more effective at improving dry skin condition that paralleled with the normalization of free amino acids in plasma and epidermis of NC/Nga mice.

• 한국초지조사료학회지
• /
• 제6권3호
• /
• pp.169-173
• /
• 1986

본(本) 시험(試驗)은 새로 도입(導入)된 13개(個) 품종(品種)의 수수-수단그라스잡종(雜種)(Sorghum bicolor (L.) Moench), T-E Goldmaker 수수잡종(雜種) (S.bicolor (L.) Moench), $NC^+$ 88SS 수단그라스 잡종(雜種) (S. bicolor (L.) Moench), Supermill permillet(Pennisetum americanum (L.) Leeke) 및 teosinte(Euchlaena mexicana Schrad.)를 Pioneer 988 수수-수단그라스 잡종(雜種)을 대조 품종으로 하여 건물생산성(乾物生産性), 조단백질함량(粗蛋白質含量) in vitro 건물소화율(乾物消化率)(IVDMD) 및 그밖의 생육특성(生育特性)을 비교하여 농가(農家)에 새로운 자료(資料)를 제시하기 위하여 수행되었다. 건물수량(乾物收量)에 있어서 14품종간(品種間)의 유의성은 인정되지 않았으나 teosinte 및 TE Goldmaker는 수량이 가장 낮았다. 각(各) 품종간(品種間)에 다소의 차이는 있었으나 대부분의 품종(品種)들이 엽병(葉病)(잎마른병)에 강하였으며 pearlmillet과 teosinte는 전혀 엽(葉)에 이병이 안되었고 $NC^+$ 88SS는 엽고병(葉枯病)에 매우 약하였다. 수수-수단그라스계(系) 잡종(雜種)의 평균(平均) 조단백질(粗蛋白質) 함량(含量)은 pearlmillet과 수수잡종(雜種) 보다는 낮았으나 수단그라스 잡종(雜種)보다는 높았다. G-83F, TE Goldmaker, Teosinte 및 HW 5111의 IVDMD는 대조 품종인 P-988보다 높았으며 고온기(高溫期) 청예용(靑刈用) 사초(飼草)의 조단백질(粗蛋白質) 함량(含量)과 IVDMD간에는 일정한 상호관계(相互關係)가 없었다.

• Journal of Biosystems Engineering
• /
• 제16권3호
• /
• pp.228-238
• /
• 1991

Cam plays very important roles due to continuous requirement for the high-speed and automation of the machinery. A large number of studies of cam curve were carried out by many researchers, and CNC milling and machining center for manufacturing cam have been widely used recently. The purpose of this study was to develop a CAD/CAM system for cam using QuickBasic language in 16-bit PC for application of cam design and manufacturing. Results obtained were as follows : 1. It was possible to input data by entering cam angle and its corresponding R, from 0 to 360 deg. of cam angle. The tediousness at entering data was minimized because of the same data format for both cylindrical cam and disc cam, and free format used for data file. 2. It was possible to design cam by choosing only the number of cam curve because of developing the CAD/CAM program with dimensionless method of cam curves including widely used 19 kinds. After selecting the number of the cam curve, the CAD/CAM system automatically shows the characteristics of cam motion enough to help a designer to decide : displacement, velocity, acceleration and jerk. 3. It was possible to execute, in an efficient way, both the cam profile synthesis and the generation of NC program for CNC machining center by using the input data. 4. This NC program generated by the CAD/CAM system developed here, was evaluated as positive in relation with actual manufacturing experiments and thought to be useful in its application without any modification. It can be said that this CAD/CAM system could be used by the beginners to design and manufacture the cam automatically as the system consists of very simple dialogue methods. In addition, self-developed QuickBasic would be would used as a basic tool for further stuides in this area of research, together with application.