• Journal of the Korean Society of Tobacco Science
• /
• v.23 no.2
• /
• pp.109-114
• /
• 2001

A CAB cDNA vector(pKGCAB), encoding the light harvesting chlorophyll a/b binding protein in Korean ginseng (Panax ginseng C. A. Meyer), was constructed with the CaMV35S promoter of plant expression vector. The chimeric vector was transformed into tobacco(Nicotiana tabacum cv. NC 82) using Agrobacterium tumefaciens LBA 4404 strain, and the transgenic tobacco plant CAB-TP2 was selected. Photosynthetic rates of the CAB-TP2 plant at before-flowering stage were increased about 20% under low irradiance conditions of quantum 100 and 500 $\mu$mol.m$^{-2}$ s$^{-1}$ , however, the rates were similar to those of NC 82 under quantum 1000 and 2000 $\mu$mol.m$^{-2}$ s$^{-1}$ conditions. The plants were germinating under low- or normal irradiance condition and the quantum yield of photosystem III were measured. The differences of the Fv/Em values between conditions were 0.07 and 0.01 in NC 82 and CAB-TP2, respectively. The mature leaves in the position 8-10 of the CAB-TP2 at before-flowering stage revealed l0% higher Fv/Fm values in range of 0.759 to 0.781 and 40% more chlorophyll contents of 70-93mg/$m\ell$ than those of normal NC 82. These data suggest the possibility that the increase in photosynthetic activity of leaves under low light intensity in the canopy of CAB-TP2 transgenic tobacco might lead to increase the quality of lower tobacco leaves.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.2
• /
• pp.392-398
• /
• 2007

Atopic dermatitis (AD) is a chronic inflammatory skin disease characterized by inflammatory cell infiltration in the skin. This study was performed to assess the therapeutic effects of YHYBT on the DNCB-induced dermatitis in NC/Nga mice, characterized by the onset of AD along with an increase the number of Th2 cells and dysregulation of inflammaroty mediators including cytokines and chemokines. YHYBT administration significantly reduced clinical dermatitis severity including pruritus, edema, eczematous and erythema. Histological findings indicated that the thickening of epidermis/dermis and dermal infiltration of inflammatory cells including mast cells were dramatically reduced. The suppression of dermatitis by YHYBT was accompanied by a decrease in the total number of immune cells in drained lymph node (DLN) and skin. Especially CD3+, CD4+ and CD3+CD69+ T cells in PBMC and DNL were greatly reduced. The level of IL-4 in CD3/CD28 activated splenocyte was downregulated, whereas that of IFN-'처리불가‘ was increased. Furthermore, the expression of eotaxin2 and CCR3 in skin were significanlty decreased. These data suggest that YHTBT may be effective therapeutic agents for the treatment of AD.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.617-623
• /
• 2014

This study aims to organize the pharmacological component of native chicken(NC) by analyzing the bill presented in traditional medicine NC relevant literature. And the analyze the heterogeneity and the common prescription of chicken that a variety of traditional technologies to existing treatment books private data to organize information about the scientific verification. After the analysis by building a DB and want a prescription to traditional book, herbal medicine usability throughout the assessment of the special treatment provided the basis for further product and a variety of functional food development. In addition, the continued expansion of the country and future growth engine industry related businesses through added value of cultural knowledge resources. NC of the relevant search and information system for prescription knowledge. so standardized, conceptualization, formalization is to build a knowledge of traditional medicine NC recipe DB assess the usefulness of medical literature through interdisciplinary research systems to suggest practical ways of alternative medicine and functional food development.

• Journal of Animal Science and Technology
• /
• v.63 no.3
• /
• pp.501-509
• /
• 2021

The aim of this was evaluate the efficacy of lysozyme on growth performance, nutrient digestibility, excreta microflora population, and blood profiles of weanling pigs under Escherichia coli (E. coli) challenge. A total of 30 piglets weaned at 25 days, 7.46 kg body weight, were assigned to three dietary treatments, composed of five replications, two piglets per replication, for 7 days. The dietary treatment groups were negative control (NC; without antibiotics and lysozyme), positive control (PC; NC + antibiotics), lysozyme (NC + 0.1% lysozyme). All piglets were challenged orally with 6 ml suspension, containing E. coli K88 (2 × 10⁹ CFU/mL). Dietary supplementation with lysozyme and PC resulted in no significant differences in average daily gain and gain to feed efficiency. Weanling pigs fed with E. coli challenge with lysozyme and PC treatments had significantly enhanced nutrient retentions of dry matter and energy (p < 0.05); however, there was a tendency to increase nitrogen digestibility. Furthermore, dietary inclusion of lysozyme and antibiotics treatment groups had a beneficial effect on excreta, ileal, and cecal of the fecal microbial population as decreased E. coli (p < 0.05) counts, without effects on lactobacillus counts. A significant effect were observed on a white blood cells, epinephrine and cortisol concentrations were reduced in piglets fed diets containing E. coli challenge with lysozyme and antibiotics supplementation comparison with the NC group. Therefore, the present data indicate that lysozyme in diet could ameliorate the experimental stress response induced by E. coli in piglets by decreasing intestinal E. coli, white blood cells and stress hormones and improving nutrient digestibility.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.6
• /
• pp.31-38
• /
• 2014

The purpose of this study is to make virtual machine using a 3D modeller to perform reverse engineering. Through the intuitive designer's ability, approximated model of the object is created and used to extract the data and NC tool path. The extracted data make approximated curve by using NURBS curve fitting. And the curve is used to remodel. From these series of process, the final reverse engineering data of the objects can be obtained. Two conclusions are drawn from this study. First, initial deviation of the intuitive model is one of the important factors that determine the number of repetitions of the experiment. Due to the characteristic of intuitive curve, after a certain number of repetitions the average deviation increase and radiate rather than decrease.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.5
• /
• pp.291-296
• /
• 2009

This paper presents a post-processing algorithm for 5-axis machines with three rotary axes (3R-2L type). 5-axis machining needs the postprocessor for converting cutter location (CL) data to machine control (NC) data. The existing methods for post-processing use inverse kinematics equations from for-ward kinematics. However in case of 5-axis machines with three rotary axes, the inverse kinematics equations are not induced directly since the forward kinematics equations are non-linear. In order to get the joint values from the forward kinematics equations, previous algorithms use numerical method for the post-processing, which needs searching algorithms with computation time and may result in fail. This paper proposes a geometric method for the post-processing of 3 rotary type 5-axis machines. Our algorithm has three advantages: first, it does not need establishing forward kinematics equations. Second, it is reliable method that eliminates any numerical methods for the inverse kinematics, resulting in the exact solution. Finally, the proposed algorithm can also be applied to 2R-3L type of 5-axis machines.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.4
• /
• pp.215-223
• /
• 2010

A seasonal circulation patterns in the Chinju Bay (CB) were suggested from the observed data at two channels of the Noryang Channel (NC) and the Daebang Channel (DC) during the period from 2005 to 2008. The water circulation in the CB is mainly controlled through the NC and the DC. In winter, tidal current at the surface layer of the NC flows from the Kwangyang Bay (KB) eastward into the CB, whereas the current at the bottom layer flows from the CB westward into the KB. In summer, tidal current at the surface layer of the NC goes from the CB westward into the KB. The flow system at the NC shows the typical pattern of thermohaline circulation. In spring, tidal current at the surface layer of the eastern part of the DC flows out into southeastern open ocean. However, in summer, the current in the western part of the DC flows into the CB through the DC. Also, the velocity in the western part of DC is 50~70 cm/sec stronger than that in the eastern part. To obtain better understanding on the seasonal circulation pattern in the NC and the DC, additionally the detailed studies on the field measurements and three dimensional numerical modeling are needed.

• Journal of Practical Engineering Education
• /
• v.13 no.2
• /
• pp.327-332
• /
• 2021

Materials used for education include SM20C, Al6061, and acrylic. SM20C materials are used a lot in certification tests and functional competitions as carbon steel, but they are also used in industrial sites. Al6061 is said to be a material that produces a lot of tools because it has lower hardness than carbon steel and is highly flexible. When practical guidance is given to students using acrylic materials, it is a material that causes vibration and tool damage due to excessive cutting. In this process, we examine how impact on the 5-axis equipment 2NC head can affect precision control. The weakest part of a five-axis equipment is the head that controls the AC axis. In the event of precision and cumulative tolerances in this area, the precision of all products is reduced. Thus, a key part of the 2NC head, the spindle housing was carried out using Al7075 T6 (U.S. Alcoasa) material and the entire body using FCD450 (spherical graphite cast iron). In the vibration and cutting process acting on these two materials, the analysis was carried out to determine the value of applying the force as a finite element analysis under extreme conditions. We hope that using these analytical data will help students see and understand the structure of 5-axis machining rather than 5-axis cutting.

• Journal of Practical Engineering Education
• /
• v.14 no.1
• /
• pp.119-125
• /
• 2022

Materials used for education are materials such as SM20C, Al6061, and acrylic. SM20C materials are carbon steel and are often used in certification tests and functional competitions, but are also widely used in industrial sites. The Al6061 material is said to be a material that has lower hardness and stronger flexibility than carbon steel, so it is a material that generates a lot of compositional selection of tools. If students are taught practical training using acrylic materials, vibration occurs due to excessive cutting in some parts and damage to the tool occurs. In this process, we examine to what extent the impact on the 2NC head, which is a five-axis equipment, can affect precision control. The weakest part of the five-axis equipment can be said to be the weakest part of the head that controls the AC axis. When the accuracy and cumulative tolerance of this part occur, the accuracy of all products decreases. Therefore, the core part of the 2NC head, the spindle housing, was carried out using an Al7075 T6 (Alcoa, USA) material. In the process of vibration and cutting applied to this material, the analysis was conducted to find out the value applied to the finite element analysis under extreme conditions. It is hoped that this analysis data will help students see and understand the structure of 5-axis machining rather than 5-axis cutting.

• Journal of applied mathematics & informatics
• /
• v.4 no.2
• /
• pp.387-396
• /
• 1997

For given discrete derivative data in a rectangular re-gion we propose a method to generate an approximated surface which fits the given derivative data in the region and extends smoothly to a sufficiently large rectangular region. Such an extension in nec-essary in the generation of the surface in NC(numerical control) ma-chine.