• Journal of the Korean Magnetic Resonance Society
• /
• v.2 no.1
• /
• pp.50-58
• /
• 1998

The systematic chirality investigations were made on the basic of the fact that zinc-binding tallysomycin (ZnTLMA) could have chiral centers (Zn, NC3, C6) at possible 4-, 5-, and 6-coordination models. Although our NMR data exhibit that the ligation sites are ${\beta}$-aminoalanine, ${\beta}$-hydroxyhistidine, and pyrimidine moiety, all possible coordination modes were tested out to see what kind of chiralities on NC3-C6 are favorable to each coordination mode. Tests were also made that take into account the specific configuration of functional groups, including ${\beta}$-aminoalanine, sugar ring, and ${\beta}$-hydroxyhistidine. Tests were finally extended to zinc-water binding and specific conformational studies by introducing various hydrogen bonding networks associated with the propionamide side chain and the carbamide group of mannose. Results of systematic chirality investigations exhibit that the S-S configuration of NC3-C6 is favorable to all of coordination models, but the R-S configuration, if exists at all, should have internal strain on C6 chiral center.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.6
• /
• pp.27-33
• /
• 1996

In this study, a CAD/CAM system for axisymmetric deep drawing processes has been developed. An approach to the system is based on the knowledge based system. Under the environment of CAD/CAM software of Personal Designer, the system has been written in UPL. The geometries of intermediate and final object in deep drawing process, including processes parameters are input for the CAD/CAM system. The input data can be obtained from the results of Pro_Deep. The parts drawing of die sets for each process is generated in tool design module of the CAD/CAM system. Also. the die assembly drawings can be obtained. NC commands for machining of the part can be generated in the developed CAD/CAM system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.153-156
• /
• 1995

본 논문은 gouging이 있는 free-formed parametric surface 모델로부터 간섭영역을 찾아 공구간섭을 검사하고 이를 제거하여 실시간으로 3축 NC가공을 할 수 있는 방법을 제안한다. 제안되는 방법은 parametri surface로부터 cartesian 경로를 따라 offset surface를 구하고 정의된 가공평면과의 교차곡선을 구하는 것에서 부터 시작한다. 교차곡선으로부터간섭 loop의 형성 여부를 검사함으로써 간섭영역을 찾을 수 있고 간섭을 제거하기 위해 간섭영역내의 모든 CC점이 공구 중심으로 부터 최소한 공구를 벗어나 위치하도록 공구를 공구의 측방향으로 이동시켰다. 이 논문은 free-formed surface의 gouging 부위에서 발생하는 공구간섭을 신속히 제거하고 CL data를 생성하여 실시간으로 3축 NC 가공을 하기 위한 하나의 접근이다.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.1
• /
• pp.60-68
• /
• 2004

The purpose of this paper is to establish an effective inspection system by using OMM (On-Machine Measurement) system based PC-NC. This system can reduce manufacturing lead time because a workpiece is inspected at every machining process and the manufacturing system which includes inspection faculty is able to realize on-line process on CNC machining center. The proposed OMM system is composed of a few algorithms for determination of inspection parameters. It is accomplished by determining the number of measuring points, their location, measuring path using fuzzy logic, Hammersley's method, TSP (Traveling Salesperson Problem) algorithm. The inspection feature applied to this system is based on machining feature. This method is tested by simulation and experiment that are analyzed measuring data and geometry tolerance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.999-1002
• /
• 2002

Cylindrical Cam Mechanism is widely used in the fields of industries, such as machine tool exchangers, textile machinery. This paper proposes a method for manufacturing of cylindrical cam in Multi CNC machining center. Multi CNC machining center has two different types depending on the tilting axis. For the manufacturing procedures. in this paper the location and the orientation of cutter path are defined from shape design data of cam. The integral NC code fur the both types of multi-axis CNC machining center can be created using the coordinates mapping between design coordinates and work coordinates. Finally, CAD/CAM program is developed on $C^{＋＋}$ language. This program can display manufacturing and kinematics simulation, which can make integral NC code for multi-axis CNC machining center of two types.

• 연구논문집
• /
• s.22
• /
• pp.47-54
• /
• 1992

A problem of relevant interest to some industries is that of optimum two-dimensional layout. The objective of this work is to allocate the shapes on a sheet in such a way to minimize the amount of waste. A nesting software has been developed to help user arrange the 2D parts effectively. It provides various functions, e.g., transformation, distance-check, NC post-processor, etc. This software is developed in X window system with C langusge. Final goal of this software is generating NC code data of the 2D parts on the sheet that can be directly used in NC machines.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.11
• /
• pp.77-83
• /
• 1997

This work is concerned with the algorithm of generating a new circular are interpolation. This research presents a new biarc curve fitting that is a circular interpolation method based on a triarc curve fitting. The triarc method, where a segment span is composed of three circular arcs, using maximum error estimation has the advantage of generating arc splines easily to a given tolerance. The new biarc method is called when the adjacent radii are the same in the same in the triarc method. In generating the machining data for various cam curves in CNC machining with the biarc method and the new biarc method, the latter accomp- lished faster NC-code generation, shorter NC-code block formation and machined the same cam profile more efficiently.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.547-552
• /
• 2003

In mold machining, there are many concave machining regions where chatter and tool deflection occur since MRR (material removal rate) increases as curvature increases even though cutting speed and depth of cut are constant. Boolean operation between stock and tool model is widely used to compute MRR in NC milling simulation. In finish cutting, the side step is reduced to about 0.3mm and tool path length is sometimes over 300m. so Boolean operation takes long computation time and includes much error if the resolution of stock and tool model is larger than the side step. In this paper, curvature of CL(cutter location) surface and side step of tool path is used to compute the feedrate for constant MRR machining. The data structure of CL surface is Z-map generated from NC tool path. The algorithm to get local curvature from discrete data was developed and applied to compute local curvature of CL surface. The side step of tool path was computed by point density map which includes cutter location point density at each grid element. The feedrate computed from curvature and side step is inserted to new tool path to regulate MRR. The resultants wire applied to feedrate optimization system which generates new tool path with feedrate from NC codes for finish cutting. The system was applied to speaker mold machining. The finishing time was reduced to 12.6%. tool wear was reduced from 2mm to 1.1mm and chatter marks and over cut on corner were removed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4835-4855
• /
• 2018

In this paper, we study the sparse signal recovery that uses information of both support and amplitude of the sparse signal. A convergent iterative algorithm for sparse signal recovery is developed using Majorization-Minimization-based Non-convex Optimization (MM-NcO). Furthermore, it is shown that, typically, the sparse signals that are recovered using the proposed iterative algorithm are not globally optimal and the performance of the iterative algorithm depends on the initial point. Therefore, a modified MM-NcO-based iterative algorithm is developed that uses prior information of both support and amplitude of the sparse signal to enhance recovery performance. Finally, the modified MM-NcO-based iterative algorithm is used to estimate the time-varying sparse wireless channels with temporal correlation. The numerical results show that the new algorithm performs better than related algorithms.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.1
• /
• pp.18-24
• /
• 2009

This paper proposes an analytical method of evaluating the maximum error by modeling the exact tool path for the tool traverse singular region in five-axis machining. It is known that the NC data from the inverse kinematics transformation of 5-axis machining can generate singular positions where incoherent movements of the rotary axes can appear. These lead to unexpected errors and abrupt operations, resulting in scoring on the machined surface. To resolve this problem, previous methods have calculated several tool positions during a singular operation, using inverse kinematics equations to predict tool trajectory and approximate the maximum error. This type of numerical approach, configuring the tool trajectory, requires much computation time to obtain a sufficient number of tool positions in a region. We have derived an analytical equation for the tool trajectory in a singular area by modeling the tool operation into a linear and a nonlinear part that is a general form of the tool trajectory in the singular area and that is suitable for all types of five-axis machine tools. In addition, we have evaluated the maximum tool-path error exactly, using our analytical model. Our algorithm can be used to modify NC data, making the operation smoother and bringing any errors to within tolerance.