• 산업공학
• /
• 제8권3호
• /
• pp.155-169
• /
• 1995

일반적인 CAD/CAM 시스템을 이용해서 생성한 NC-code는 오류의 가능성의 항시 내포되어 있으므로, 실 가공하기 전에 NC-code의 불량 여부를 검사할 필요가 있다. 본 논문에서는 Z-map 형태의 계산모형을 이용한 모의가공의 계산방법을 볼엔드밀, 평엔드밀, 라운드엔드밀에 대해서 도식적으로 설명하였다. 또, 모의가공 된 형상만으로 NC-code의 불량 여부를 검사하는 자체적인 검사방법과 모의가공 된 형상과 설계형상을 비교해서 불량여부를 판별하는 비교 검사방법을 제시하였다. Z-am 모델을 모의가공과 가공형상의 검증에 사용하면, 빠른 속도로 실제가공 상황을 재현 할 수 있고 육안 검증을 포함한 다양한 수치적 검증이 가능하다. 또, 간단한 데이터 구조이므로 필요한 앨고리즘을 효율적이고, 로버스트하게 구현할 수 있다.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1074-1083
• /
• 1993

본 연구에서 제시된 방법은 Fig.2(c)에 나타낸 방법으로 공구궤적의 검증과 더불어 NC공구궤적의 잘못된 부분과 정도를 찾아내 수정할 수 있도록하여 기존의 NC검증시스템의 비효율성을 해결하고자 했다.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.68-75
• /
• 2005

This paper presents a new method for the optimization of feed rate in sculptured surface machining. A NC verification model based on Z-map was utilized to obtain chip load according to feed per tooth. This optimization method can regenerate a new NC program with respect to the commanded cutting conditions and the NC program that was generated from CAM system. The regenerated NC program has not only the same data of the ex-NC program but also the updated feed rate in every block. The new NC data can reduce the cutting time and produce precision products with almost even chip load to the feed per tooth. This method can also reduce tool chipping and make constant tool wear.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.801-805
• /
• 2000

This paper presents a new method of tool path optimization. A NC verification model based Z-map was utilized to obtain chip load in feed per tooth. This developed software can regenerate a NC program from cutting condition and the NC program that was generated in CAM. The regenerated NC program has not only all same data of the ex-NC program but also the new feed rates in every block. The new NC data can reduce the cutting time and manufacture precision dies with the same chip load in feed per tooth. This method can also prevent tool chipping and make constant tool wear. This paper considered the effects of acceleration and deceleration in feed rate change.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.616-619
• /
• 2002

The z-map structure is widely used for NC tool path verification as it is very simple and fast in calculation of Boolean operations. However, if the number of the x-y grid points in a z-map is increased to enhance its accuracy, the computation time for NC verification increases rapidly. To reduce this computation time, we proposed a NC verification method using 3-D graphic acceleration hardwares. In this method, the z-map of the resultant workpiece machined by a NC program is obtained by rendering tool swept volumes along tool pathos and reading the depth buffer of the graphic card. The experimental results show that this hardware-based method is faster than the conventional software-based method.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.79-83
• /
• 2001

A verification of multi-spindles drilling NC data is presented. The drilling of multi-spindles can offer productivity over three times as fast as that of single spindle. The most important things in machining tube sheet are precision of hole position and machining time. The drilling of multi-spindles has difficulties in controlling many motors to drive spindles and assign a correspondent number to each spindles. Multi-spindles drilling has different codes from CNC milling ; many subroutines, assignment of spindle, and so on. The conventional method, which inspects the NC code of the drilling, is to drill holes on a thin plate or tube sheet previously. The method results in low productivity because it consumed long machining time and welding for correction. This paper describes details of multi-spindles NC code and operation of multi-spindles drilling machine. A verification software of the multi-spindles drilling NC code is developed on the details.

• 한국CDE학회지
• /
• 제3권3호
• /
• pp.64-65
• /
• 1997

이 글에서는 1. NC 프로그램의 역사 2. NC 프로그래밍의 주요 문제 - 2차원 형상의 가공, 3차원 곡면 가공, 공구 및 holder와 공작물, 치공구와의 간섭 및 충돌 방지, 5축 및 다축 NC 가공, NC 가공을 위한 곡면 모델, 가공경로 검증 및 Cutting simulation, 곡면 또는 pocket 가공에서 공구의 자동 선정 등에 대하여 다루었다.

• 한국정밀공학회지
• /
• 제12권2호
• /
• pp.123-134
• /
• 1995

In this paper, the fast force algorithm has been studied so that it is used to calculate cutting forces and to develope the NC verification system. The NC verification using the fast force algorithm can verify excessive cutting force which is the cause of deflection and breakage of tool, and adjust the feed rate and spindle speed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.428-433
• /
• 1993

In this paper, the fast algorithm to calculate cutting force of milling and its application to NC verification system have been studied. The fast force algorithm can calculate the maximum cutting force fastly during one revelotion of tool. The NC verification using the fast force algorithm can verify excessive cutting force which is the cause of deflection and breakage of tool, and can so adjust the feed rate as to manufacture with the maximum force criterion or maximum machining error criterion. So, the fast force algorithm has been added to the NC verification system, the NC verification system can verify the physical problems in NC code effectively.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1555-1562
• /
• 1995

This study represents the non-dimensional cutting force model. With the non-dimensional cutting force model it is possible to estimate efficiently the maximum cutting force during one revolution of cutter. Using the non-dimensional cutting force model, the feed rate and spindle speed are adjusted so as to satisfy the maximum cutting force and maximum machining error. To verify the accuracy and efficiency of the non-dimensional cutting force model, a series of experiments were conducted, and experimental results proved and verified the non-dimensional cutting force model. The NC toolpath verification system developed in this paper uses the non-dimensional cutting force model, so that it is effective for calculating the cutting force and adjusting the cutting conditions.