• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.352-352
• /
• 2012

MOSFET의 크기는 작아지고 다양한 소자열화 현상으로 신뢰성 문제가 나타나고 있다. 특히 CMOS 인버터에서 PMOS가 'HIGH'일 때 음의 게이트 전압이 인가되고 소자 구동으로 인해 온도가 높아지면 드레인 전류의 절대값은 줄어들고 문턱 전압 절대값과 GIDL전류가 증가하는 NBTI현상이 발생한다. 본 연구에서는 NBTI현상에 따른 열화 특성을 분석하였다. 측정은 드레인과 소스는 접지시킨 상태에서 온도 $100^{\circ}C$에서 게이트에 -3.4V과 -4V의 게이트 스트레스를 인가한 후 게이트 전압에 따른 드레인 전류를 스트레스 시간에 따라 측정하였다. 측정에 사용된 소자의 산화막 두께는 25A, 채널 길이는 $0.17{\mu}m$, 폭은 $3{\mu}m$이다. 게이트에 음의 전압이 가해지면 게이트 산화막에 양전하의 interface trap이 생기게 된다. 이로 인해 채널 형성을 방해하고 문턱 전압은 높아지고 드레인 전류의 절대값은 낮아지게 된다. 또한 게이트와 드레인 사이의 에너지 밴드는 게이트 전압으로 인해 휘어지게 되면서 터널링이 더 쉽게 일어나 GIDL전류가 증가한다. NBTI스트레스 시간이 증가함에 따라 게이트 산화막에 생긴 양전하로 인해 문턱 전압은 1,000초 스트레스 후 스트레스 전압이 각각 -3.4V, -4V일 때 스트레스 전에 비해 각각 -0.12V, -0.14V정도 높아지고 드레인 전류의 절대값은 5%와 24% 감소한다. GIDL전류 역시 스트레스 후 게이트 전압이 0.5V일 때, 스트레스 전에 비해 각각 $0.021{\mu}A$, $67{\mu}A$씩 증가하였다. 결과적으로, NBTI스트레스가 인가됨에 따라 게이트 전압 0.5V에서 0V사이의 드레인 전류가 증가함으로 GIDL전류가 증가하고 문턱전압이 높아져 드레인 전류가 -1.5V에서 드레인 전류의 절대값이 줄어드는 것을 확인할 수 있다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.6
• /
• pp.25-30
• /
• 2013

In nanoscale MOSFET technology, aging effects such as Negative Bias Temperature Instability(NBTI), Hot carrier Injection(HCI), Time Dependent Dielectric Breakdown (TDDB) and so on which affect circuit reliability can lead to severe degradation of digital circuit performance. Therefore, this paper has proposed the adaptive compensation circuit to overcome the aging effects of digital circuits. The proposed circuit deploys a power gating structure with variable power switch width and variable forward body-biasing voltage in order to adaptively compensate for aging induced performance degradation, and has been designed in 45nm technology.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.7
• /
• pp.569-574
• /
• 2007

In this paper, the reliability (NBTI degradation: ${\Delta}V_{th}$) and device characteristic of nano-scale PMOSFET with plasma nitrided oxide (PNO) is characterized in depth by comparing those with thermally nitrided oxide (TNO). PNO case shows the reduction of gate leakage current and interface state density compared to TNO with no change of the $I_{D.sat}\;vs.\;I_{OFF}$ characteristics. Gate oxide capacitance (Cox) of PNO is larger than TNO and it increases as the N concentration increases in PNO. PNO also shows the improvement of NBTI characteristics because the nitrogen peak layer is located near the $Poly/SiO_2$ interface. However, if the nitrogen concentration in PNO oxide increases, threshold voltage degradation $({\Delta}V_{th})$ becomes more degraded by NBT stress due to the enhanced generation of the fixed oxide charges.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.3 s.345
• /
• pp.1-8
• /
• 2006

In this paper, reliability (HCI, NBTI) and device performance of nano-scale CMOSFETs with different channel stress were investigated. It was shown that NMOS and PMOS performances were improved by tensile and compressive stress, respectively, as well known. It is shown that improved device performance is attributed to the increased mobility of electrons or holes in the channel region. However, reliability characteristics showed different dependence on the channel stress. Both of NMOS and PMOS showed improved hot carrier lifetime for compressive channel stress. NBTI of PMOS also showed improvement for compressive stress. It is shown that $N_{it}$ generation at the interface of $Si/SiO_2$ has a great effect on the reliability. It is also shown that generation of positive fixed charge has an effect in the NBTI. Therefore, reliability as well as device performance should be considered in developing strained-silicon MOSFET.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.550-552
• /
• 2009

The negative bias temperature instability on LTPS TFTs in a darkened and an illuminated environment was investigated. Experimental results reveal that the generation of interface state density showed no change between the different NBTI stresses. The degradation of the grain boundary trap under illumination was more significant than for the darkened environment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.8
• /
• pp.23-28
• /
• 2010

In this paper, comparative analysis of digital and analog performances of strained-silicon PMOSFETs with different carrier direction were performed. ID.SAT vs. ID.OFF and output resistance, Rout performances of devices with <100> carrier direction were better than those of <110> direction due to the greater carrier mobility of <100> channel direction. However, on the contrary, NBTI reliability and device matching characteristics of device with <100> carrier direction were worse than those with <110> carrier direction. Therefore, simultaneous consideration of analog and reliability characteristics as well as DC device performance is highly necessary when developing mobility enhancement technology using the different carrier direction for nano-scale CMOSFETs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.142-142
• /
• 2012

최근 반도체 산업의 발전과 동시에 소자의 집적화에 따른 단채널 효과가 문제되고 있다. 채널 영역에 대한 게이트 영역의 제어능력이 떨어지면서 누설전류의 증가, 문턱전압의 변화가 발생하며, 이를 개선하기 위해 이중게이트 혹은 다중게이트 구조의 트랜지스터가 제안되었다. 하지만 채널길이가 수십나노미터 영역으로 줄어듦에 따라 소스/드레인과 채널간의 접합형성이 어렵고, 고온에서 열처리 과정을 거칠 경우 채널의 유효길이를 제어하기 힘들어진다. 최근에 제안된 Junctionless 트랜지스터의 경우, 소스/드레인과 채널간의 접합이 없기 때문에 접합형성 시 발생하는 공정상의 문제뿐만 아니라 누설전류영역을 개선하며, 기존의 CMOS 공정과 호환되는 이점이 있다. 한편, 집적화되는 반도체 기술에 따라, 동작 시 발생하는 스트레스가 소자의 신뢰성에 중요한 요인으로 작용하게 되며, 현재 Junctionless 트랜지스터의 신뢰성 특성에 관한 연구가 부족한 상황이다. 따라서, 본 연구에서는 Junctionless 트랜지스터의 NBTI 특성과 hot carrier effect에 의한 신뢰성 특성을 분석하였다. Junctionless 트랜지스터의 경우, 축적모드로 동작하기 때문에 스트레스에 의해 유기되는 캐리어의 에너지가 낮다. 그 결과, 반전모드로 동작하는 Junction type의 트랜지스터에 비해 스트레스에 의한 subthreshold swing 기울기의 열화와 문턱전압의 이동이 감소하였다. 또한 소스/드레인과 채널간의 접합이 없기 때문에 hot carrier effect에 의한 게이트 절연막 및 계면에서의 열화가 개선되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.122-122
• /
• 2008

Recently, Metal/Alumina/Silicon-Nitride/Silicon-Oxide/Silicon (MANOS) structures are one of the most attractive candidates to realize vertical scaling of high-density NAND flash memory [1]. However, as ANO layers are miniaturized, negative and positive bias temperature instability (NBTI/PBTI), such as the flat band voltage shift, ${\Delta}V_{FB}$, the interfacial trap density increase, ${\Delta}D_{it}$, the gate leakage current, ${\Delta}I_G$. and the retention characteristics, in MONOS capacitors, becomes an important issue in terms of reliability. It is well known that tunnel oxide degradation is a result of the oxide and interfacial traps generation during FN (Fowler-Nordheim) stress [2]. Because the bias temperature stress causes an increase of both interfacial-traps and fixed oxide charge could be a factor, witch can degrade device reliability during the program and erase operation. However, few studies on NBTI/PBTI have been conducted on improving the reliability of MONOS devices. In this work, we investigate the effect of post-annealing gas on bias temperature instability (BTI), such as the flat band voltage shift, ${\Delta}V_{FB}$, the interfacial trap density shift, ${\Delta}I_G$ retention characteristics, and the gate leakage current characteristics of MANOS capacitors. MANOS samples annealed at $950^{\circ}C$ for 30 s by a rapid thermal process were treated via additional annealing in a furnace, using annealing gases $N_2$ and $N_2-H_2$ (2 % hydrogen and 98 % nitrogen mixture gases) at $450^{\circ}C$ for 30 min. MANOS samples annealed in $N_2-H_2$ ambient had the lowest flat band voltage shift, ${\Delta}V_{FB}$ = 1.09/0.63 V at the program/erase state, and the good retention characteristics, 123/84 mV/decade at the program/erase state more than the sample annealed at $N_2$ ambient.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.3
• /
• pp.21-30
• /
• 2012

Technology trend and application of laser fuse, anti-fuse, and eFUSE as well as the structure, programming mechanism, and reliability of eFUSE have been reviewed. In order to ensure eFUSE reliability in the field, a sensing circuit trip point consistent with the fuse resistance distribution, process variation, and device degradation in the circuit such as hot carrier or NBTI, as well as fuse resistance reliability must be considered to optimize and define a reliable fuse programming window.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.147-147
• /
• 2009