• Elastomers and Composites
• /
• 제6권1호
• /
• pp.71-81
• /
• 1971

The intention of this study is to investigate the properties of polymer blend, NBR/PVC vulcanizates and blending procedures such as roll-mixing temperatures and sequences for polymer blending of NBR and PVC(resin type). The results obtained are as follows: 1. The roll temperature applied for polymer blending is around $150^{\circ}C$. At this temperature region, the degradation of rubber stock, which may be caused by heat, can be minimized and mill processing in practical application in industries can also be facilitated. 2. It is obviously necessary that a small amount of plasticizers should be added to the stock for improving processibility of roll mixing and physical properties. 3. On roll-mixing sequence, it is more effective that PVC compounded with plasticizer is added to NBR milled on hot roll. 4. The vulcanizates of the blends with different degree of polymerization of PVC ale similar to one another in properties. 5. NBR/PVC(70/30) blends shows the better physical characters than eve,-made foreign latex blend except abrasion-resistance. 6. As PVC addition ratio is increased, the physical properties such as resistance to ozone, tear, heat and oil and tensile strength, modulus, hardness have also improved, on the other hand, tension set and rebound character decreased. 7. The curve of ultimate elongation have point of inflection at the ratio of $30\sim40$ part of PVC. 8. While CR is blended, the physical properties such as brittle point, rebound and resistance to oil in high temperature have improved. 9. Polymer blend of NBR and domestic PVC is applied for the industrial utility such as rubber sole and heel, electric wire cover and oil-resistant packing, coating and gasket, printing roll, film for food packing etc.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 추계학술발표회초록집
• /
• pp.142-142
• /
• 2003

• Elastomers and Composites
• /
• 제40권2호
• /
• pp.119-127
• /
• 2005

고무부품의 신뢰성을 확보하기 위해서 고무재료의 물성파악과 수명평가는 매우 중요하다 하겠다. 본 연구에서는 냉장고 콤프레샤 모터에서 발생되는 소음 및 진동 제어 목적으로 고무마운트에 사용되는 고무재료인 NBR과 EPDM에 대해 상온과 $70^{\circ}C,\;85^{\circ}C,\;100^{\circ}C$에서 75일 동안 노화시킨 상태에서 단축 인장과 이축 인장으로 물성시험을 수행하여 가교밀도, 100% 모듈러스 변화와 응력-변형률 관계를 파악하였다. 또한, 고무소재의 노화수명을 예측하기 위해 가속열 노화시험을 수행하여 시간-온도 환산식인 아레니우스 관계식을 구하였다.

• 통합자연과학논문집
• /
• 제9권1호
• /
• pp.62-66
• /
• 2016

To manipulate the mechanical properties of acrylonitrile butadiene rubber (NBR), addition of nano-sized silica on rubber was performed and nano-silica NBR composite (NSR) materials were fabricated by press molding. The effect of volume fraction of silica in the NSR on the spectroscopic and mechanical properties has been studied.

• Elastomers and Composites
• /
• 제29권3호
• /
• pp.213-225
• /
• 1994

The Purpose of this dissertation is to study the preparation technique and physical properties of expanded rubber. The respective samples of NR, NBR and the standard compounds of EPDM rubber were prepared by mixing plasticizer DOP and LCR in various ratio. And their vulcanization characteristics, physical properties and foaming states were studied. Vulcanization characteristics were investigated using cure curve that had been obtained from Oscillating Disk Rheometer study, and the microscopic photographs of foaming states were obtained using electron microscope. The vulcanization characteristics of the samples, DOP 30phr and LCR 30phr, were found to be suitable. The tests, like hardness test and resilience, tensile test on the physical properties of each sample showed that plasticizing efficiencies of DOP and LCR were almost the same. Oil resistance test exhibited DOP was better than LCR and compression set test showed LCR was excellent plasticizer. The foaming states of NR, EPDM compounds were uniform, but those of NBR compounds were not uniform. Consequently vulcanization characteristics, physical properties and foaming states of all the samples satisfied the SAE requirements.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제10권4호
• /
• pp.213-235
• /
• 2010

In this paper, we carried out an accelerated degradation test that is commonly used to predict characteristics life of rubber gaskets for a pole transformer. The potential failure mode applied for the test is rubber elongation and the corresponding failure mechanism is heat. From the result, we found that Weibull distribution is the fatigue life distribution in NBR and H-NBR. After estimating characteristics life in commonly used temperature, the average life span of $B_{50}$ in NBR is 7.7 years under $50^{\circ}C$ and the life span in H-NBR is 28 years.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.634-637
• /
• 2004

This paper presents a Split Hopkinson Pressure Bar(SHPB) technique to obtain compressive stress-strain data for rubber materials. An experimental technique that modifies the conventional Split Hopkinson Pressure Bar(SHPB) has been developed for measuring the compressive stress-strain responses of materials with low mechanical impedance and low compressive strengths such as rubber. This paper introduces an all-polymeric pressure bar which achieves a closer impedance match between the pressure bar and the specimen materials. In addition, we are a pulse shaper to lengthen the rising time of the incident wave to ensure stress equilibrium and homogeneous deformation of a rubber materials. It is found that the modified technique can be determine the dynamic deformation behavior of an NBR rubber more accurately.

• Elastomers and Composites
• /
• 제22권4호
• /
• pp.314-323
• /
• 1987

A blend ratio of rubber vulcanzates comprising NBR, CR, EPDM, NR, BR, and SBR alone or blended is determind through a P.G.C. It is found that a characteristic peak of elastomer is proportional to the content of each elastomer when they are pyrolysed. It is also classified to the different AN content in NBR vulcanizates, identification of sulfur-modified and non-sulfur bearing CR polymers, and the content of ethylene, propylene monomer and the third monomer in EPDM vulcanizetes.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.209-212
• /
• 2004

The O-ring seal is a usual component part in various mechanical apparatuses for sealing that makes efficient performance of the equipments. The sealing performance of 0-ring is effected in environments of the O-ring seal, like that applied pressures, working temperatures, interferences and materials. In this paper, an pressurized, NBR O-ring is calculated by experimental methods and analysed numerically using the MARC finite element program. The calculated experimental and FEM results showed that the Contact force O-ring decreases as a function of temperature.

• Elastomers and Composites
• /
• 제53권1호
• /
• pp.13-18
• /
• 2018

A face seal comprising a metal ring and acrylonitrile butadiene rubber (NBR) was installed in the driving part and suspension unit. The seal serves as a bearing and simultaneously prevents entry of foreign matter from external environment as well as internal oil leakage. Subsequently, the rubber-rod ring generates axial pressure owing to rubber elasticity (hardness), performs static sealing function between housing details and outer diameter of seal, and transmits rotational torque to the rotating support ring. In order to improve the durability of NBR, which performs the above tasks, and to effectively use it in tracked-vehicle applications at extreme temperatures, this study reports a mixing design approach to enhance cold and oil resistances of NBR.