• 한국재료학회지
• /
• 제8권1호
• /
• pp.3-9
• /
• 1998

40$0^{\circ}C$ H$_{2}$O, D$_{2}$O및 $O_{2}$분위기에서 Zr-2.5Nb합금의 부식거동을 분석하였다. Martensitic $\alpha$'-Zr상이나 $\alpha$-Zr과 $\beta$-Zr상의 Zr-2.5Nb합금인 경우, 부식분위기에 매우 민감하여, $O_{2}$속에서 가장 큰 부식속도를 보였다. 반면, $\alpha$-Zr나 $\beta$-Zr상의 경우, 부식 매질에 따른 별다른 차이없이 높은 부식저항성을 보였다. 이러한 Zr-2.5Nb 합금의 미세조직 및 부식 매질에 따른 부식거동변화는 Zr-2.5Nb 합금의 음극 지배 부식반응의 관점으로 해석되었으며, 이들 결과를 이용하여 CANDU 형및 RBMK 형 Zr-2.5Nb 압력관의 가동조건 차이를 설명할 수 있었다. Zr-2.5Nb 합금의 모든 조직에서 주로 단사정 ZrO$_{2}$산화물이 형성되었으며, 산화물내 정방정 ZrO$_{2}$비율은 산화물 두께가 증가함에 따라 감소하였다.

• Journal of Magnetics
• /
• 제10권1호
• /
• pp.28-32
• /
• 2005

The magnetic properties and ordering behavior of Nb-doped FePt alloy films prepared by dc-magnetron sputtering were investigated. It was found that Nb addition retarded the ordering reaction from the disordered face-centered-cubic (fcc) Al phase to the ordered face-centered-tetragonal (fct) L1₀ phase. The tetragonality (c/a ratio) of the ordered fct L1₀ phase increased with the Nb concentration. Nb addition hampered c-axis contraction during ordering, probably because the larger Nb atoms occupy Pt sites. Consequently, the coercivity and magnetocrystalline anisotropic energy of Nb-doped FePt alloy films are lower than those of un-doped FePt film under equivalent annealing conditions.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제3권1호
• /
• pp.35-39
• /
• 2000

The present study dealt with the relationships among the interfacial shear strength, the thickness of interfacial reaction layer and the impact value of $Nb/MoSi_2$ laminate composites. In addition, the tensile test was conducted to evaluate the fracture strain of $Nb/MoSi_2$ laminate composites. To change the thickness of the reaction layer, $Nb/MoSi_2$ laminate composites alternating sintered MoSi2 layers and Nb foils were fabricated as the parameter of hot press temperature. It has been found that the growth of the reaction layer increases the interfacial shear strength and decreases the impact value by localizing a plastic deformation of Nb foil. There also exist appropriate shear strength and the thickness of the reaction layer, which are capable of maximizing the fracture energy of $Nb/MoSi_2$.

• Bulletin of the Korean Chemical Society
• /
• 제20권8호
• /
• pp.893-896
• /
• 1999

Novel citric acid based Ti, Nb and Ta precursors that are highly stable in the presence of water were developed. No alkoxides of Ti, Nb and Ta were utilized in the preparation, instead much less moisture-sensitive metallic Ti, NbCl5 and TaCl5 were chosen as starting chemicals for Ti, Nb and Ta, respectively. The feasibility of these chemicals as precursors is demonstrated in the powder synthesis of BaTi4O9, Y3NbO7 and LiTaO3. The water-resistant Ti precursor was employed as a new source of water-soluble Ti in the amorphous citrate method, and phase pure BaTi4O9 in powdered form was successfully synthesized at 800 ？. The Pechini-type polymerizable complex method using the water-resistant Nb and Ta precursors was applied to the synthesis of Y3NbO7 and LiTaO3, and both the powder materials in their pure form were successfully synthesized at reduced tempera-tures, viz. 500-700 ？. The remarkable retardation of hydrolysis of these water-resistant precursors is explained in terms of the partial charge model theory.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권4호
• /
• pp.1-5
• /
• 2021

Among elemental metals, niobium (Nb) has the highest superconducting transition temperature (T_c) at ambient pressure. Thus, Nb films have been used in superconducting electronics and radio frequency cavity applications. In this study, the depositional factors determining the crystallinity and T_c of Nb films were investigated. An Nb film grown at a sputtering temperature of 240℃ exhibited the maximum crystallinity of Nb and the minimum crystallinity of niobium oxide. X-ray photoelectron spectroscopy confirmed a maximum atomic percent of niobium and a minimum atomic percent of oxygen. A sputtering power of 210 W and a sputtering time of 50 min were the optimal conditions for Nb deposition, and the T_c of the optimized film (9.08 K) was close to that of bulk Nb (9.25 K). Transmission electron microscopy images of the thick film directly confirmed the removal of the typical in-plane compressive strain in the (110) plane caused by residual stress.

• 한국결정성장학회지
• /
• 제9권5호
• /
• pp.447-453
• /
• 1999

Czochralski법으로 congruent한 조성(48.6 mol% $LiNbO_2$)과 $LiNbO_3$: Mg(4.5, 6.0, 10.0, 20.0mol%), $LiNbO_3$ : Mn(0.1 mol%), $LiNbO_3$: Fe(0.05 mol%), $LiNbO_3$ : (Mg(4.5)+Mn(0.1), Fe(0.05 mol%)), LiNbO3 : (Mg(20.0)+Mn(0.1), Fe(0.05 mol%))인 융액으로부터 결정을 c-축 방향으로 성장시켰다. 이 결정들은 상온에서의 XRD pattern과 상온~$1230^{\circ}C$의 온도영역과 100Hz~10MHz의 주파수영역에서의 유전상수, 상온에서의 UV_VIS, IR 스펙트럼, 결정내의 Mn2+, Fe3+ 이온에 대한 ESR 스펙트럼 등을 측정하였는데 XRD pattern과 상전이 온도, UV 흡수단, OH- 이온에 의한 스펙트럼, ESR 스펙트럼 등의 Mg첨가량 의존성으로부터 Mg가 첨가된 $LiNbO_3$ 결정의 결함구조에 대해서 논의하였다. congruent한 $LiNbO_3$결정과 Mg를 첨가한 $LiNbO_3$ 결정에서의 Mn2+ 이온은 Mg의 첨가량에 관계없이 Li+을 치환한다. 그러나 congruent한 $LiNbO_3$ 결정과 Mg를 첨가한 $LiNbO_3$ 결정에서의 Fe3+ 이온은 Mg가 4.5 mol% 첨가된 결정에서는 Li+ 자리를 Mg가 6.0 mol% 이상 첨가된 결정에서는 {{{{ { Nb}`_{Li } ^{5+ } }}}} 자리를 치환한다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 춘계학술발표회
• /
• pp.15-15
• /
• 1993

• E2M - 전기 전자와 첨단 소재
• /
• 제7권3호
• /
• pp.252-261
• /
• 1994

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 추계학술발표회요약집
• /
• pp.261.2-261
• /
• 1999

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 추계학술발표회요약집
• /
• pp.229-229
• /
• 1998