• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.11
• /
• pp.897-903
• /
• 2015

In this paper, the contrast therapy of skin was numerically investigated by solving the conjugate heat transfer problem. A finite volume method based on the SIMPLE algorithm was adopted to solve the axisymmetric incompressible Navier-Stokes equations, coupled with an energy equation. These equations are strongly coupled with the Pennes bio-heat equation in order to consider the effect of blood perfusion rate. We investigated the thermal response of skin at some selected depths for various input temperature profiles of a stimulator for contrast therapy. From the numerical simulations, the regions with cold/hot threshold temperatures were found for five input temperature profiles. It was shown that the temperature varies mildly for different input profiles as the depth increases, owing to the Pennes effect. The input temperatures for effective hot/cold stimulation of dermis layer were found to be $47^{\circ}C$ and $7^{\circ}C$, respectively. The present numerical results will be used for finding an optimal temperature profile of a stimulator for contrast therapy.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.6
• /
• pp.72-85
• /
• 2003

The purpose of this study is to establish the basis of the ecological restoration on the limestone mines in Korea, through the research of the revegetation measures of the disturbed slopes in Japanese limestone mines and the analysis of the case of Ibuki and Bukou limestone mines to realize the restoration works successfully. According to the number of mines to carry out the revegetation works increase every year, the revegetation area and amount of planting also go on increasing in Japan. In the small mines the environmental problem is not recognized seriously, but some mines have muchly invested in the revegetation of the damaged land by mines. Ibuki mine in Shiga-gen is practicing the four principles for the restoring of the revegetation in the disturbed slopes by mines. Firstly, the mean slope preserves $37^{\circ}$ in the last rock cut slopes. Secondly, the last rock cut slopes to rehabilitate are covered with the soil dressing 30cm high. Thirdly, the grasses in the mining area are digged up beforehand, and then they are reused to the revegetation works of rock cut slopes. Lastly, from the upper rock cut slopes the revegetation works begin, the process of the above are repeated, as the result, the restoring works will be completed. Upon the ground of these principles, the complex of the original vegetation and the native species seeding, that is, the revegetation technique of Ibuki have established. In the difficult area to revegetate, sodding works, heaping up vegetation-sack, seed-spraying, heaping up soil-sacks and planting works are adapted variously. Bukou mine in Saitama-gen try to maintain the revegetation, the screening and the stability of the enormous mining rock cut slope, and for these works, the activity of 'Chichibu Working Group of Rock Wall for Limestone Mines' contributes largely. The chief technique of the revegetation in Bukou mine is following; after the making the berm on the rock cut slopes, the soil dressing is filled in it, and the trees is planted for the screening of the rock cut slopes. They devide the rock cut slopes into four typical types, and choose the different ways to make the berm and fill the soil dressing in characteristic. Most of the planting trees are consist ofthe native species of Mt. Bukou through the stages of the nursery and transplantation. Not only the revegetation of the demaged land but also the breeding of the conservational plants also are their important business.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.527-534
• /
• 2015

This paper presents an integrated chassis control with electronic stability control (ESC) and active front steering (AFS) under lateral force constraint on AFS. The control yaw moment is calculated using a sliding mode control. The tire forces generated by ESC and AFS are determined using weighted pseudo-inverse based control allocation (WPCA) in order to generate the control yaw moment. On a low friction road, AFS is not effective when the lateral tire forces of front wheels are easily saturated. To solve problem, the lateral force of AFS is limited to its maximum and the braking of ESC is applied with WPCA. To evaluate the effectiveness of the proposed method, a simulation was performed on the vehicle simulation package, $CarSim^{(R)}$. From the simulation, it was verified that the proposed method could enhance the maneuverability and lateral stability if the lateral force of AFS exceeds its maximum.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.3
• /
• pp.312-320
• /
• 1996

This study was to investigate the changes of phytotoxicity of food waste during composting at an aerated static pile for 80 days. The concentration of sodium in the final compost increased by more than 30% and almost of the sodium was a water soluble type which corresponds to about 94% of the total concentration. Major volatile fatty acid(VFA) produced during the composting was acetic acid and also somewhat of butyric acid. High concentration of acetic acid during the composting was kept up for a month and then decreased progressively. It suggests that the phytotoxicity by the VFAs produced during composting of food waste could be removed through a stabilization process in a period of about 40 days. From the statistical analysis between germination index(G.I.) and VFAs. or G.I. and sodium, the phytotoxicity of food waste samples was more dependent in the changes of acetic acid concentration than that of sodium concentration. Considering low G.I. value in the final food waste compost which is matured completely, however. the agricultural utilization of the food waste compost may be to have a big problem due to excess sodium of the compost which is impossible to remove by composting and seriously inhibits growth of plants.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.573-579
• /
• 2016

Studies on the deformation behavior of materials subjected to impact loads have been carried out in various fields of engineering and industry. The deformation and fracture of members for these machines/structures are known to correspond to the intermediate strain-rate region. Therefore, for the structural design, it is necessary to consider the dynamic deformation behavior in these intermediate strain-rate ranges. However, there have been few reports with useful data about the deformation and fracture behavior at intermediate strain-rate ranges. Because the intermediate strain-rate region is located between quasi-static and high strain-rate regions, it is difficult to obtain the intermediate strain-rate using conventional reasonable test equipment. To solve this problem, in this study, the measurement reliability of the constructed drop-bar impact tensile test apparatus was established and the dynamic behavior at the intermediate strain-rate range of carbon steels was evaluated by utilizing the apparatus.

• Journal of Sensor Science and Technology
• /
• v.11 no.3
• /
• pp.163-170
• /
• 2002

This paper proposes a $10\;{\mu}m$ thick oxide air-bridge structure which can be used as a substrate for RF circuits. The structure was fabricated by anodic reaction, complex oxidation and micromachining technology using TMAH etching. High quality films were obtained by combining low temperature thermal oxidation ($500^{\circ}C$, 1 hr at $H_2O/O_2$) and rapid thermal oxidation (RTO) process ($1050^{\circ}C$, 2 min). This structure is mechanically stable because of thick oxide layer up to $10\;{\mu}m$ and is expected to solve the problem of high dielectric loss of silicon substrate in RF region. The properties of the transmission line formed on the oxidized porous silicon (OPS) air-bridge were investigated and compared with those of the transmission line formed on the OPS layers. The insertion loss of coplanar waveguide (CPW) on OPS air-bridge was (about 2dB) lower than that of CPW on OPS layers. Also, the return loss of CPW on OPS air-bridge was less than about -20 dB at measured frequency region for 2.2 mm. Therefore, this technology is very promising for extending the use of CMOS circuitry to higher RF frequencies.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.9
• /
• pp.597-604
• /
• 2016

A parallel algorithm of bi-conjugate gradient method was developed based on CUDA for parallel computation of the incompressible Navier-Stokes equations. The governing equations were discretized using splitting P2P1 finite element method. Asymmetric stenotic flow problem was solved to validate the proposed algorithm, and then the parallel performance of the GPU was examined by measuring the elapsed times. Further, the GPU performance for sparse matrix-vector multiplication was also investigated with a matrix of fluid-structure interaction problem. A kernel was generated to simultaneously compute the inner product of each row of sparse matrix and a vector. In addition, the kernel was optimized to improve the performance by using both parallel reduction and memory coalescing. In the kernel construction, the effect of warp on the parallel performance of the present CUDA was also examined. The present GPU computation was more than 7 times faster than the single CPU by double precision.

• Journal of Families and Better Life
• /
• v.25 no.3 s.87
• /
• pp.119-135
• /
• 2007

The purpose of this study is to find out the level of digital stress that people experience and to investigate the effects of socio-economic variables on that. To collect data, structured questionnaire was developed and 1,200 questionnaires were distributed through internet. There were 2 dimensions in this study to examine digital stress. First dimension was about the devices themselves: computers and the other digital goods. Second dimension was about the time digital stress occurring in consumers' decision-making process: purchasing and using. Based on Yeo&Kim(2004), sub-dimensions of purchasing and using aspects were chosen. 5 sub-dimensions in purchasing side were new technology, cost, variety of alternatives, warranty service, and informational problem 6 sub-dimensions in using field were mal(or impaired)-functioning. physical aspects, immaturity in use, pressure to use, addiction to use, and informational problem. As independent variables, sex, age, educational level, digitalization acceptability and computer usability were used. The overall level of digital stress was around the average point which was not as high as expected. Digital stress of purchasing was higher than that of using. First, in purchasing aspects, the level of digital stress was relatively high in cost, variety of alternatives and warranty service. Hence, clear communications with consumers about the distinctive aspects and cost of digital devices in market are needed. Secondly, in using side, mal-functioning and physical aspects were relatively more powerful stressors. In the other words, the more serious problems were not from the characteristics of individual consumers but from those of products. Producers should put their best efforts to reduce imperfection (defectiveness) and develop user-friendly digital devices. Also, users' individual efforts to overcome the problems that can be solved privately are necessary. Finally, it was discovered that sex and computer usability were very important variables on digital stress. To extend computer usability of consumers and get over digital illiteracy, it is essential to expand the paths to give chances for people to contact with computers and other digital goods. Still there are lots of people whore computer-illiterate or low-skilled at computers. In policies or educational programs made by government, communities, or schools, more attention should be paid to the digitally vulnerable groups.

• Korean journal of applied entomology
• /
• v.26 no.4 s.73
• /
• pp.195-201
• /
• 1987

Insects and nematodes associated with crops growing in plastic film houses were surveyed throughout the southern part of Korea at Jinju, Jiphyeon, Geumsan, Hapcheon, Changyeong, Namji, Milyang, Kimhae, Busan, Sooncheon and Gwangyang from December of 1984 to December of 1985. The phytonematodes representing six families, nine genera and nine species, and the insects representing four orders, seventeen families, twenty-three genera and twenty-four species were identified. The mite also caused problem on the leaves of strawberry and watermelon. Of these Meloidogyne incognita and Aphis gossyphii were most important ones. Aphelenchoides fragariae and M. hapla, however dominant nematodes on strawberry. M. incognita was always detected from pepper plants which were heavily infected with Phytophthora capsici. Tomato roots were readily infected with root-knot nematodes in non-sterilized upland surface soil. However, tomato were growing-vigorouly free from nematode damage in the upland surface soil treated by nematicide or in the paddy soil. A few galls were developed even in the upland subsoil at 60cm below surface. Soil salinity affected profoundly the host-root-knot nematode interaction: the numerous galls were developed on the tomato roots at EC $1mS/cm^2$ followed by 4mS and 2mS, but few galls were at 6mS.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.859-869
• /
• 2015

In this study, we analyze the problem of wedge cracks, which are geometrically unsymmetrical in transversely piezoelectric materials. A single concentrated antiplane mechanical load and inplane electrical load are applied at the point of the wedge surface, while one concentrated antiplane load is applied at the crack surface. The crack surfaces are considered as permeable thin slits, where both the normal component of electric displacement and the electric potential are assumed to be continuous across these slits. Using Mellin transform method, the problem is formulated and the Wiener-Hopf equation is derived. By solving the equation, the solution is obtained in a closed form. The intensity factors of the stress and the electric displacement are obtained for any crack length as well as inclined and wedge angles. Based on the results, the intensity factors are independent of the applied electric loads. The electric displacement intensity factor is always dependent on that of stress intensity factor, while the electric field intensity factor is zero. In addition, the energy release rate is computed. These solutions can be used as fundamental solutions which can be superposed to arbitrary electromechanical loadings.