• 대한기계학회논문집
• /
• 제13권6호
• /
• pp.1203-1214
• /
• 1989

본 연구에서는 화이버각도, 경계조건 및 하중형태의 변화에 따라 적층 복합재료원통 셸 구조물의 수치예를 제시하고, NASTRAN수치결과 및 기존 문헌들과 비교하여 구하여진 결과의 타당성을 입증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1146-1149
• /
• 2001

In this study, modeling methods for viscoelastic material are reviewed to investigate the vibration characteristics. Frequency response functions are obtained by employing experimental modal analysis and compared with the modeling results from a commercial software NASTRAN. Properties of equivalent model of the beam with damping material are also calculated by using the RKU equation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1995년도 춘계학술대회논문집; 전남대학교, 19 May 1995
• /
• pp.73-80
• /
• 1995

본 연구에서는 범용 구조해석 프로그램인 NASTRAN을 이용하여 실위성용 복합소재 태양전지판 구조물의 유한요소 모델링을 통해 진동특성에 대한 해석을 수행하였으며, 진동 특성 측정용 치구를 제작하고, 측정센서의 질량이 미치는 영향을 해석적인 방법으로 분석하였으며, 진동특성 측정시험을 수행하였다. 최종적으로 해석결과를 시험결과와 비교하므로써 태양전지판 구조물의 진동특성 시험방법을 정립하고 모델링기법을 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.452-456
• /
• 2004

A study on gust loads alleviation using aircraft control surface was performed. Aeroservoelastic model including control surface controller was formulated and validated by comparing the results of continuous turbulence response analysis with those of MSC/NASTRAN. Optimal control with output feedback was adopted for designing the control surface controller, and the effects of gust loads alleviation was validated by performing the numerical simulation for the controller designed.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.66-71
• /
• 2000

This paper presents a development of an electric hole cutter for agricultural polyethylen film. Mechanical hole cutter with blades and electrical hole cutters are being tried in products now. But Mechanical hole cutter systems have a few faults. So the hole cutter systems using electrical heater have mainly been developed and optimized. Computer aided engineering was introduced for the purpose of electric heated hole cutter being developed, because it helped reduce the unnecessary tests. Three types of heated cups were surveyed with MSC/Nastran, and the type of model C was most effective in heat transfer.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.495-499
• /
• 2000

Auditory system is separated to Outer Ear, Middle Ear and Inner Ear, Middle Ear plays an important role as the sound transfer on amplitude. With analysing of Middle Ear, we can understand disease and compare unformal auditory systems. However, the investigation of mechanical modeling and analysis have been reported in a few paper. In this paper, a three dimensional Eardrum model of human ear was developed and analysed applying the general purpose Finite-Element program (Nastran). Vibration patterns of the eardrum obtained from FEM analysis are in agreements with the experimental results using stroboscope.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.63-67
• /
• 2000

A tool holder system has been designed to measure cutting forces in diamond turning. This system includes a 3-component piezo-electric tranducer. In this research, tool holder system is modeled by considering the element dividing, material properties, and boundary conditions using MSC/PATRAN. Mode and frequency analysis of structure is simulated by MSC/NASTRAN, for the purpose of developing the effective design. In addition, tool holder system is verified by vibration test using accelerometer. This system will aid to the development of Fast Tool Servo (FTS)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1432-1436
• /
• 2006

Feasibility of optimizing Zwicker's loudness has been shown by using MSC/NASTRAN, SYSNOISE, and a semi-analytical design sensitivity by Wang and Kang. Design sensitivity analysis of Zwicker's loudness is developed by using ANSYS, COMET, and an adjoint variable method in order to reduce computation. A numerical example shows significant reduction of computation time for design sensitivity analysis.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.373-380
• /
• 1998

3D finite element analyses of movable bearing shoe and hinged bearing shoe are performed. The finite element models are built using MSC/PATRAN and analyses are carried out using MSC/NASTRAN. Results are again completely processed using MSC/PATRAN. From the results of the analyses, trends of deformation and stress distribution are reviewed and important factors to consider in the design of bearing shoes are discussed. Furthermore optimum crowning amount for the roller of movable bearing shoe was determined according to the results of the analyses.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.39-44
• /
• 2002

A three node triangular element with drilling rotations incorporating Improved Layerwise Zig-zag Theory(HZZT) is developed to analyze the vibration of spinning pretwisted composite blades with embedded damping layer. Matching conditions at the interfaces between the damping material and the border material are enforced by setting the shear forces matched and different shear strains along the interfaces. The natural frequencies and modal loss factors of cantilevered pretwisted composite blade with damping core are calculated with the present triangular element enforcing the matching conditions and compared to experimental results and MSC/NASTRAN results using a layered combination of plate and solid elements.