• Journal of Korean Society of Steel Construction
• /
• v.25 no.1
• /
• pp.71-80
• /
• 2013

Fire-resistant (FR) test data for a square concrete-filled steel tube (CFT) columns consisting of high-strength steel (fy>650MPa) and high strength concrete (fck>100MPa) under axial loads are insufficient. The FR behavior of square high-strength CFT members was investigated experimentally for two specimens having ${\Box}-400{\times}400{\times}15{\times}3,000mm$ with two axial load cases (5,000kN and 2,500kN). The results show that the FR performance of the high-strength CFT was rapidly decreased at earlier time (much earlier at high axial load) than expected due to high strength concrete spalling and cracks. In addition, a fiber element analysis (FEA) model was proposed and used to simulate the fiber behaviour of the columns. For steel and concrete, the mechanical and thermal properties recommended in EN 1994-1-2 are adopted. Test results were compared to those of numerical analyses considering a combination of temperature and axial compression. The numerical model can reasonably predict the time-axial deformation relationship.

• Korean Journal of Cognitive Science
• /
• v.27 no.3
• /
• pp.421-439
• /
• 2016

The present study investigates the effects of semantic transparency on the learning of new words using both behavioral measures and event-related brain potentials. Participants studied novel words with either semantically transparent or opaque definitions while their brain potentials were recorded. Learning performance was assessed with both a lexical decision task and a recall test. The results indicated that transparent novel words were easier to learn than opaque words. More specifically, self-paced learning times were shorter for transparent novel words across three study sessions. Transparent words also elicited reduced N400s compared with opaque words in all sessions. Moreover, lexical decisions to both learned novel words and real words were faster and more accurate within the transparent condition compared to the opaque condition. These results suggest that semantic transparency also plays an important role within word learning, just as within word recognition, further supporting the notion that morphological information is critical within lexical processing.

• Journal of the Korean Vacuum Society
• /
• v.14 no.3
• /
• pp.147-152
• /
• 2005

The structural evolution of $Ni(400\;\AA)/Au(400\;\AA)$ films on p-type GaN during thermal oxidation in ai. was investigated by in situ x-ray scattering experiments. These results indicate that Ni layer and Au layer intermix during thermal oxidation. Au-rich solid solutions containing the different amount of Ni atoms are formed during oxidation. The Ni atoms in Au-rich solid solution out-diffuse as the oxidation proceeds resulting in the formation of NiO(111) phase. Despite of the complete oxidation at $650^{\circ}C$, the position of bulk Au(111) diffraction profile indicates that small amount of Wi atoms are still incorporated in the Au phase.

• Journal of the Korean Society for information Management
• /
• v.36 no.3
• /
• pp.131-148
• /
• 2019

This study constructed a cognitive model of information processing to understand the topic of a sound material and its characteristics. It then proposed methods to generate sound summaries, by incorporating anterior-posterior N400/P600 components of event-related potential (ERP) response, into the language representation of the cognitive model of information processing. For this end, research hypotheses were established and verified them through ERP experiments, finding that P600 is crucial in screening topic-relevant shots from topic-irrelevant shots. The results of this study can be applied to the design of classification algorithm, which can then be used to generate the content-based metadata, such as generic or personalized sound summaries and video skims.

• Journal of Animal Environmental Science
• /
• v.1 no.1
• /
• pp.65-75
• /
• 1995

This experiment was carried out to the effects of population density and C/N ratios of feed on the growth, reproductive effciency and cast producation of the earthworm(Eisenia foetida). The population densities of 50, 100, 150, 200 and 250 individuals of the earthworm fed with different C/N ratios of 25, 35, 45 and 55 cow manures were studied in rearing box($6,400cm^3$), and at the fertility stage during a period of 60 days. The results were summarized as follows; The survial rate(SR), increasing rate(IR), reproductive efficiency(RE) and cast production of the earthworms showed highest values in C/N ratio of 25. These results may indicate that C/N ratio of 25 is a very favourable feed for the growth of the earthworms. The survial rate(SR) indicated significant positive correlation with reproductive efficiency(RE) in different C/N ratios of feeds. The survial rate(SR) showed highest values in population densities of $50{\sim}100$ worms/$6,400cm^3(64.0{\sim}128.0cm^3/worm$). On the contrary, increasing rate(IR) tended to decreased with the increased population densities. The survival rate(SR) indicated significant negative correlation with reproductive efficiency(RE) in different population densities of the earthworms. The cast production estimated were $31.6mg{\sim}67.4mg/day/worm$ grown in optimum population densities($50{\sim}100\;worms/6,400cm^3$). The earthworm casting are an excellent soil conditioning material or organic fertilizer sources with a high chemical composition and their physical properties.

• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.117-118
• /
• 2008

The $V_{1.85}W_{0.15}O_5$ thin films deposited on Pt/Ti/$SiO_2$/Si substrates by RF sputtering method exhibited fairly good TCR and dielectric properties. It was found that film crystallinity, dielectric properties, and TCR properties were strongly dependent upon the annealing temperature. The dielectric constants of the $V_{1.85}W_{0.15}O_5$ thin films annealed at $400^{\circ}C$ were 38.11, with a dielectric loss of 1%, respectively. Also, the TCR values of the $V_{1.85}W_{0.15}O_5$ thin films annealed at $400^{\circ}C$ were about -3.45%/K.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.648-651
• /
• 2001

We studied about luminance characteristics of blue organic electroluminecent device as thickness ratio. The device is fabricated TPD(N,N'-dyphenyl-N-N'-bis(3-methyphenyl) -1,1'-biphenyl-4,4'-diamine) as hole transport layer and Butyl -PBD(1,1,4,4-Tetraphenyl-1,3-butadiene) as emission layer and electron transport layer. Total thickness is 1000${\AA}$ as HTL and ETL, each devices has 500${\AA}$:500${\AA}$. 400${\AA}$:600${\AA}$ and 600${\AA}$:400${\AA}$ of TPD : Butyl-PBD. We obtained the maximum brightness about 175cd/㎡ 500${\AA}$: 500${\AA}$ thickness devices as HTL:ETL

• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.5
• /
• pp.269-276
• /
• 2010

This study has been carried out to the low temperature plasma nitriding treatment on the mechanical properties of stainless steel at temperature range between $400^{\circ}C$ and $500^{\circ}C$. It was found that there was precipitated to free CrN matrix below $400^{\circ}C$ and there was precipitated S-phase of STS 316L, ${\varepsilon}$-phase of STS 409L and ${\alpha}N$-phase of STS 420J2. STS 316L has formed relatively abundant CrN phase and ${\gamma}^{\prime}-Fe_4N$ phase at $500^{\circ}C$, alternatively STS 409L and STS 420J2 were more deeply nitrided than STS 316L at $500^{\circ}C$.

• Journal of Sensor Science and Technology
• /
• v.19 no.5
• /
• pp.337-341
• /
• 2010

In this work, the nanocrystalline ZnO/polycrystalline(poly) aluminum nitride(AlN)/ Si-layered structure was fabricated for humidity sensor applications based on surface acoustic wave(SAW). The ZnO film was used as a sensitive material layer. The ZnO and AlN(0002) were deposited by a sol-gel process and a pulse reactive magnetron sputtering, respectively. The ZnO sensitive films coated on AlN have a hexagonal wurtzite structure after the thin films annealed at $400^{\circ}C$, $500^{\circ}C$ and $600^{\circ}C$. The surface of the film exhibits sponginess and a nanometer particle size(below 50 nm). The largest shift in the frequency response was at approximately 200 kHz(the relative humidity: 10 %~90 %) for the structure annealed at $400^{\circ}C$. The effect of the change in the environmental temperature on the frequency response of the SAW humidity sensor was also investigated.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.636-640
• /
• 1995

FeN thin films were deposited on glass by RF diode reactive sputtering. The films were annealed in the air and in vacuum. The film annealed in the air showed sharp decrease of saturation magnetization and change of easy axis direction to hard axis direction and vice versa after $300^{\circ}C$ anneal. The coercivity decreased down to 0.5 Oe after $400^{\circ}C$ anneal. After $450^{\circ}C$ anneal, the film showed ${\varepsilon}-Fe_{2-3}N$ phase. The films annealed in vacuum showed coercivity increase after $300^{\circ}C$ anneal for the film deposited with initial substrate temperature of $35^{\circ}C$ and after $400^{\circ}C$ anneal for the film deposited with initial substrate temperatue of $170^{\circ}C$. These films showed $Fe_{16}N_{2}$ X-ray peaks after $450^{\circ}C$ anneal.