• Journal of Korean Society for Atmospheric Environment
• /
• v.11 no.1
• /
• pp.37-44
• /
• 1995

Concentration of particulate nitrate classified by formation mechanism and particle diameter in ambient air was determined from Feb. to Oct. 1993. Sampling was carried out using a two-stage Andersen air sampler at the top of a five-story building located at Kon-Kuk University in seoul. Concentration of N $H_{4}$N $O_{3}$ in TSP was measured by pyrolysis of sample filters at 160.deg.C for 1hr. concentration of N $H_{4}$N $O_{3}$ was higher in winter time compared with that in summmer time. Also, concentration of N $H_{4}$N $O_{3}$ was higher in fine particles compared with that in coarse particle. The range of N $H_{4}$N $O_{3}$ concentration was between 2.9 and 9.9.mu.g/ $m^{3}$. Weight fraction of N $H_{4}$N $O_{3}$ in total particulate nitrate was 31.1 .sim. 59.5%, and weight fraction of N $H_{4}$N $O_{3}$ in TSP was 2.1 .sim. 11.2%. Concentration of NaN $O_{3}$, which originated from sea salt, was highest in spring time and lowest in summer time,and the concentration range was between 0.1 and 0.7.mu.g/ $m^{3}$. NaN $O_{3}$/TSP ratio was very low (0.1 .sim. 0.4%) indicating that the portion of NaN $O_{3}$in TSP was negligible. Concentration of particulate nitrate originated from soil was 2.4 .sim. 2.9.mu.g/ $m^{3}$. Weight fraction of that in total particulate nitrate was 14.0 .sim. 37.1%.

• Journal of Adhesion and Interface
• /
• v.14 no.2
• /
• pp.57-67
• /
• 2013

The incompletion of TIR (Total Internal Reflection) in FTIR (Frustrated Total Internal Reflection) touch screen has been investigated as follows. Assuming a 3 layer thin film of medium1 ($n_1$)-medium2 ($n_2$)-medium3 ($n_3$) with refraction indices of $n_1=n_3{\neq}n_2$, it was theoretically proven that FTIR or OT (ordinary transmission) phenomena might happen through medium2 from medium1 to medium3 relying on relative difference in $n_1(=n_3)$ and $n_2$, and that the formulae for FTIR and OT could be transformed into each other depending on the number state (imaginary or real) of the light wave phase. In parallel to the theoretical analysis, the incompletion of TIR in acrylate due to external contacts was also elucidated from the experimental and phenomenological viewpoints. On the basis of this considerate work, we explained how to improve the touching performance for better FTIR touch screen.

• Journal of the Korean Ceramic Society
• /
• v.26 no.1
• /
• pp.31-36
• /
• 1989

In order to synthesize AlN-polytypes from AlN-SiO2-Al2O3 system, composition A (AlN/SiO2/Al2O3=1/0.3/0.05, mole ratio) and composition B(AlN-SiO2-Al2O3=1/0.2/0.05, mole ratio) were used. AlN-polytypes were produced by nitriding the mixture at 175$0^{\circ}C$~190$0^{\circ}C$ under N2 atmosphere. For lower reaction temperature, 15R phase was produced and in the case of higher reaction temperature, AlN phase was only produced. As each composition was heated at 185$0^{\circ}C$ in N2 atmosphere, produced main phases were 15R phase for composition A and 21R phase for composition B respectively. The fracture surfaces of produced reactants showed porous skeleton structure.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.1
• /
• pp.21-26
• /
• 1994

Lysimeter experiments were carried out to study the vertical distribution of inorganic nitrogen, the changes in pHs of soil and leachate and the fate of applied nitrogen with or without grass. The concentration of $NO_3-N$ of surface soil(0~20cm) at the rates of 0, 7, 14 and 21kg N/10a ranged from 4 to 13mg/kg, while those of subsurface soi1(20-40cm) were below 10mg/kg at 0, 7 and 14kg N/10a and subsequently increased to 83.8mg/kg at 35kg N/10a. The concentration of $NH_4{^+}-N$ was positively correlated with that of $NO_3-N$ for surface soil(>0.05). However, the concentration of $NH_4{^+}-N$ was negatively correlated with that of $NO_3-N$ for subsurface soil. A positive correlation was observed between $NO_3-N$ and extractable cations of soils. The pH of subsurface soil decreased with the $NO_3-N$ concentration and the N application rate, while that of leachate inereased with the N application rate. The pH differences between subsurface soil and leachate were 2.5 for bare soil and 3.1 for 35kg N/10a. Higher N application rate caused more soil N accumulation and the gas loss and resulted in a larger difference between N uptake by grass and the applied N.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1361-1368
• /
• 2014

In this paper, we analyze emddings among HFCube(n,n), HCN(n,n), HFN(n,n) with lower network cost than that of Hypercube. The results are as follows. We propose that $Q_{2n}$ can be embedded into HFCube(n,n) with dilation 5, congestion 2. HCN(n,n) and HFN(n,n) are subgraphs of HFCube(n,n). HFCube(n,n) can be embedded into HFN(n,n) with dilation 3. HFCube(n,n) can be embedded into HCN(n,n) with dilation O(n). The results will be helpful to analyze several efficient properties in each interconnection network.

• The KIPS Transactions:PartA
• /
• v.9A no.3
• /
• pp.333-340
• /
• 2002

Embedding is a mapping an interconnection network G to another interconnection network H. If a network G can be embedded to another network H, algorithms developed on G can be simulated on H. In this paper, we first propose a method to embed between Hierarchical Cubic Network HCN(n, n) and Hierarchical Folded-hypercube Network HFN(n, n). HCN(n, n) and HFN(n, n) are graph topologies having desirable properties of hypercube while improving the network cost, defined as degree${\times}$diameter, of Hypercube. We prove that HCN(n, n) can be embedded into HFN(n, n) with dilation 3 and congestion 2, and the average dilation is less than 2. HFN(n, n) can be embedded into HCN(n, n) with dilation 0 (n), but the average dilation is less than 2. Finally, we analyze the fault tolerance of HCN(n, n) and prove that HCN(n, n) is maximally fault tolerant.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.111-116
• /
• 1998

Silicon nitride is hard and tough ceramic material. Hereby, mechanical machinability is very poor. It has also high electrical resistance. Silicon nitride of extremely high electrical resistivity becomes conductive ceramic composite by adding 30 wt% TiN. Ceramics with high electrical conductivity can be electrical discharge machined. Using by the Electrical Discharge Machining (EDM) technique. $Si_3N_4-TiN$ ceramic composite with high electrical conductivity is utilized to make metal working tool. These tool materials have severe wear problem as well as oxidation. Post HIP processing after sintering $Si_3N_4-TiN$ ceramic composites was performed. The tribological property of $Si_3N_4-TiN$ composite as a function of content of TiN was investigated in air, at room temperature. The hardness, fracture toughness, and flexural strength were compared with the wear volume. SEM observation of wear tracks can make an explanation of wear mode of $Si_3N_4-TiN$ composite.

• YAKHAK HOEJI
• /
• v.37 no.1
• /
• pp.36-40
• /
• 1993

The 4-(2'-(N-(l-methyl-3'-carbamylphenyl)-n-propyl))aminoethyl)-l- hydroxy-2-pyridone which has isoelectronic and isosteric structural similarity with dobutamine without having the Catechol-O- Methyltransferase(COMT) vulnerable m-hydroxy group was synthesized via 12 synthetic steps.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.3
• /
• pp.117-125
• /
• 2002

This study experimented a possibility of advanced treatment through microorganism that converts $NH_3-N$ to organic nitrogen in wastewater contaminated by ammoniac nitrogen unlike conventional nitrogen removal process. After distributing three kinds of special bacteria that use $NH_3-N$ as a substrate, when those bacteria were cultured in no salt condition and salt condition (3% NaCl), M11 showed better growth in salt condition and M12 showed better growth in no salt condition. However M7l grew well in both no salt condition and salt condition. In the test of glucose effect, maximum growth and removal rate were observed in glucose concentration of 5g/L but in high concentration (1000mg/L as $NH_3-N$) of $NH_3-N$ growth and removal rate were low. Removal rate was the highest in 100mg/L $NH_3-N$ and the fact that concentration of $NO_2-N$ and $NO_3-N$ didn't increase assumed $NH_3-N$ was converted to organic nitrogen. Optimum concentration of $K_2HPO_4$ for phosphorous supply and buffer was 5g/L. Special bacteria distributed could use $NO_2-N$ and $NO_3-N$ as well as $NH_3-N$ as substrates. This study showed that when growth rate of bacteria was high removal rate also was high. It is possible to apply as a method to treat wastewater polluted by $NH_3-N$.

• Journal of the Korean Ceramic Society
• /
• v.32 no.7
• /
• pp.809-816
• /
• 1995

Ti1-xAlxN films were successfully deposited on high speed steel and silicon wafer by plasma-assisted chemical vapor deposition using a TiCl4/AlCl3/N2/Ar/H2 gas mixture. Plasma process enabled N2 gas to nitride AlCl3, which is not possible in sense of thermodynamics. XPS analyses revealed that the deposited layer contained Al-N bond as well as Ti-N bond. Ti1-xAlxN films were polycrystalline and had single phase, B1-NaCl structure of TiN. Interplanar distance, d200, of (200) crystal plane of Ti1-xAlxN was, however, decreased with Al content, x. Al incorporation into TiN caused the grain size to be finer and changed strong (200) preferred orientation of TiN to random oriented microstructure. Those microstructural changes with Al addition resulted in the increase of micro-hardness of Ti1-xAlxN film up to 2800Kg/$\textrm{mm}^2$ compared with 1400Kg/$\textrm{mm}^2$ of TiN.