• 제목/요약/키워드: N2 addition

검색결과 5,114건 처리시간 0.037초

The Potato Transcriptional Co-activator StMBF1 Is Up-regulated in Response to Oxidative Stress and Interacts with the TATA-box Binding Protein

  • Arce, Debora Pamela;Tonon, Claudia;Zanetti, Maria Eugenia;Godoy, Andrea Veronica;Hirose, Susumu;Casalongue, Claudia Anahi
    • BMB Reports
    • /
    • 제39권4호
    • /
    • pp.355-360
    • /
    • 2006
  • To gain a better understanding on the function of the potato Solanum tuberosum Multiprotein Bridging Factor 1 protein (StMBF1) its interaction with the TATA box binding protein (TBP) was demonstrated. In addition we reported that StMBF1 rescues the yeast mbf1 mutant phenotype, indicating its role as a plant co-activator. These data reinforce the hypothesis that MBF1 function is also conserved among non closely related plant species. In addition, measurement of StMBF1 protein level by Western blot using anti-StMBF1 antibodies indicated that the protein level increased upon $H_2O_2$ and heat shock treatments. However, the potato $\beta$-1,3-glucanase protein level was not changed under the same experimental conditions. These data indicate that StMBF1 participates in the cell stress response against oxidative stress allowing us to suggest that MBF1 genes from different plant groups may share similar functions.

Pseudomonas aeruginosa F722부터 유래된 biosurfactant를 이용한 등.경유 혼합물의 생분해율 향상 (Biodegradation Enhancement of The Mixture of Kerosene and Diesel by using Biosurfactant from Pseudomonas aeruginosa F722)

  • 오경택;박귀환;강창민;;정선용
    • KSBB Journal
    • /
    • 제18권6호
    • /
    • pp.529-535
    • /
    • 2003
  • 본 연구에서는 등$.$경유 혼합물을 Pseudomonas aeruginosa F722를 이용하여 분해시킬 때 생분해율에 미치는 생물계면활성제, 화학계면활성제 및 공기 공급량의 영향을 조사하였다. 그 결과, 탄화수소 분해율은 0.01%와 0.15% 농도의 생물계면활제를 첨가하였을 때가 0.05%, 0.1% 및 0.2%농도의 생물계면활제를 첨가하였을 때보다 최고 6.2% 높은 94.3, 94.2% 제거율을 나타냈다. 하지만, 0.15% 생물계면활제를 첨가하였을 때가 0.01% 생물계면활제를 첨가하였을 때보다 탄화수소 분해율이 더 안정적이었다. 그리고 생물계면활성제 (surface tension; 30mN/m)와 화학계면활성제 (Tween 80;39mN/m, detergent;31mN/m)를 0.15% 농도로 첨가하여 배양하였을때, 탄화수소 분해율은 94.2, 93.5, 93.4%로 비슷하였다. 하지만, P. aeruginosa F722의 개체수는 생물계면활성제를 첨가했을 때가 화학계면활성제를 첨가했을 때보다 2배 이상 증가된 19 ${\times}$ $10^{7}$ cfu/$m\ell$로 조사되었다. 0.5vvm으로 공기를 공급하면서 교반을 수행하였을 때, 배양 3일 후, 사용균주를 접종하지 않은 공시험에서 탄화수소 분해율은 68.8%였으며, P. aeruginosa F722를 접종하였을 때는 94.8%이었다. 0.5 vvm으로 공기를 공급하였을 때가 공기를 공급하지 않았을 때보다 배양시간이 1/3로 단축되었다. 그리고 교반배양 (3일)과 정치배양 (10일)에서 탄화수소 분해율은 각각 94.8, 93.7%였다.

상온 겔프린팅 기법을 이용한 비파괴 검사용 방사선 증감지 제작 및 평가 (The Evaluation and Fabrication of Radiation Phosphor Screen for Non-destructive Testing using the Special Room Temperature Gel-printing Method)

  • 이준행
    • 한국방사선학회논문지
    • /
    • 제14권4호
    • /
    • pp.391-396
    • /
    • 2020
  • 본 연구는 Gd2O2S:Tb 형광체 화합물을 사용하여 비파괴검사 중 방사선투과검사에 적용할 수 있는 형광체 증감지를 개발하였다. 또한 이러한 형광체 증감지를 FE-SEM, RMS 및 RDS 분석을 통해 형광체 증감지의 영상 균일도를 분석하였다. 또한, 응력-변형 특성 곡선 측정을 통해 Gd2O2S:Tb 형광체 스크린의 인장강도, 신장률 및 탄성계수를 평가하였다. 실험 결과, RSD 값이 평가 기준인 10% 이내로 우수한 영상균일도를 가지는 것으로 평가되었다. 또한, 물리적 특성 평가 결과, 인장 강도는 1.1760 N/㎟이며, 파단시 인장강도는 1.1515 N/㎟로 나타났다. 이러한 결과로부터 본 연구에서 제작된 상온 겔-프린팅 제조법을 이용하여 제작된 Gd2O2S:Tb 형광체 스크린은 방사선 투과검사용 디지털 방사선 검출기에 적용이 가능할 것으로 사료된다.

Kinetics Studies on the Mechanism of Hydrolysis of S-Phenyl-S-vinyl-N-p-tosylsulfilimine Derivatives

  • Pyun, Sang-Yong;Kim, Tae-Rin;Lee, Chong-Ryoul;Kim, Whan-Gi
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권3호
    • /
    • pp.306-310
    • /
    • 2003
  • Hydrolysis reactions of S-phenyl-S-vinyl-N-p-tosylsulfilimine (VSI) and its derivatives at various pH have been investigated kinetically. The hydrolysis reactions produced phenylvinylsulfoxide and p-toluene sulfonamide as the products. The reactions are first order and Hammett ρ values for pH 1.0, 6.0, and 11.0 are 0.82, 0.45, and 0.57, respectively. This reaction is not catalyzed by general base. The plot of k vs pH shows that there are three different regions of the rate constants $(k_t)$ in the profile.; At pH < 2 and pH > 10, the rate constants are directly proportional to the concentrations of hydronium and hydroxide ion catalyzed reactions, respectively. The rate constant remains nearly the same at 2 < pH < 10. On the bases of these results, the plausible hydrolysis mechanism and a rate equation have been proposed: At pH < 2.0, the reaction proceeds via the addition of water molecule to sulfur after protonation at the nitrogen atom of the sulfilimine, whereas at pH > 10.0, the reaction proceeds by the addition of hydroxide ion to sulfur directly. In the range of pH 2.0-10.0, the addition of water to sulfur of sulfilimine appears to be the rate controlling step.

습지 미소생태계에서 질소 보유와 제거에 대한 고마리 ( Persicaria thunbergii ) 의 효과 (Effects of Persicaria thunbergii on Nitrogen Retention and Loss in Wetland Microcosms)

  • Woo, Yeun-Kyung;Eun-Jin Park;Dowon Lee;Kye Song Lee
    • The Korean Journal of Ecology
    • /
    • 제19권2호
    • /
    • pp.179-189
    • /
    • 1996
  • Growth and nitrogen retention of Persicaria thunbergii were investigated in the wetland microcosms which contained the plants growing on soil bed. Nitrogen solution was supplied to the microcosms with the same amount of $NH_4^{+}-N\; and\; NO_3^{-}-N$ at the rates of 0.00, 0.78, 1.57, 3.14g $N{\cdot}m^{-2}{\cdor}wk^{-1}$ from May 1 to August 31, 1995. The solution was detained for 5 days to react with soil and plant and then allowed to leach. The contents of NH_4^{+}-N\;and\; NO_3^{-}-N$ in the leachate, total Kjeldahl nitrogen, plant biomass, and soil characteristics were determined. Nitrogen retained by plant was estimated as the increment of TKN in plant biomass. The addition of 0.78 and 1.57g $N{\cdot}m^{-2}{\cdot}wk^{-1}$ resulted in significant increase of plant biomass. However, plant growth was inhibited when nitrogen was added at the rate of 3.14g $N{\cdot}m^{-2}{\cdot}wk^{-1}$. Overall, the plant biomass was positively correlated with the amount of nitrogen retained by plant and soil system. The amounts of $NO_3^{-}-N$ leached from the microcosms were 5~10 times higher than those of $NH_4^{+}-N$. While total nitrogen added ranged from 143.2 to 576.5g $N/m^2$, total leaching loss of inorganic nitrogen and nitrogen retained by plant was as little as 1.04~22.71g $N/m^2$, and 5.46~12.91g $N/m^2$, respectively. Then, the plant seemed to contribute to KDICical and microbial immobilization of nitrogen in the soil. Finally, it is suggested that a large portion of nitrogen added was lost into the air by denitrification and volatilizaton, and / or leached in organic forms.

  • PDF

Brevibacterium Flavum의 Auxotrophic Mutants에 의한 L-Threonine 생성(生成)에 관한 연구(硏究) (Studies on the Formation of L-Threonine by auxotrophic mutants of Brevibacterium flavum)

  • 이갑랑;박동철
    • 한국식품영양과학회지
    • /
    • 제16권4호
    • /
    • pp.251-261
    • /
    • 1987
  • 본(本) 실험(實驗)은 세균(細菌)에 의한 L-threonine의 효율적인 생성(生成)을 검토할 목적(目的)으로 Brevibacterium flavum ATCC 14067을 사용하여 L-threonine 생성능(生成能)이 우수한 균수(菌株)를 선발(選拔)하기 위해 변이원인 N-methyl-N'-nitro-N-nitrosoguanidine (NTG)로 처리하여 돌연변이주(突然變異株)를 유도(誘導)한 후(後), 다시 methionine 영양요구주, lysine 영양요구주, isoleucine 영양요구주, lysine 영양요구주, isoleucine 영양요구주, methionine 및 isoleucine 영양요구주를 선발(選拔)하였다. 또한 선발(選拔)된 영양요구성 변이주들 중에서 L-threonine 생성능(生成能)이 원균(原菌)에 비(比)해 $3{\sim}4$배(倍)정도 우수한 B-13균주(菌株)$(met^-)$를 선발(選拔)하여 L-threonine 생성력(生成力), 배지(培地) 조성(組成) 및 배양(培養)에 따른 몇가지 요인(要因)들에 대하여 실험한 결과 다음과 같은 결과(結果)를 얻었다. 1. L-threonine생성량은 원균주가 1.4mg/ml에 비해 methionine 영양요구성 변이주인 B-13은 4.86mg/ml로서 약 3.5배(倍)의 높은 생성량을 나타내었다. 2. B-13에 의한 L-threonine 생성(生成)에 적당한 배지조성(培地組成)은 glucose 10%, ammonium sulfate 2%, potassium phosphate monobasic 0.2%, magnesium sulfate 0.05%, biotin $200{\mu}g/l$ thiamine $300{\mu}g/l$이였으며 nicotinic acid 0.05% 첨가시 더욱 증가 되었다. 3. B-13에 있어서 유기영양원에 대한 효과는 yeast extract와 Peptone이 양호하였으며 영양요구물질인 metionine은 $100{\mu}g/ml$가 적당하였으며 aspartic acid와 homoserine 첨가시 L-threonine 생성이 증가되었으며 lysine 첨가시에는 감소하는 경향이 나타났다. 4. B-13에 의한 L-threonine 생성에 가장 적절한 pH는 $7.0{\sim}8.0$이였으며 배양일수(培養日數)는 4일(日)이 적당하였다.

  • PDF

몰리브덴(Ⅲ)과 바나듐(Ⅲ) 이핵 착물의 합성과 특성 (제5보) (Synthesis and Characterization of Dinuclear Mo(Ⅲ) and V(Ⅲ) Complexes (Ⅴ))

  • 오상오;류은영
    • 대한화학회지
    • /
    • 제39권7호
    • /
    • pp.530-537
    • /
    • 1995
  • $MCl_z(M=Mo;\;z=5,\;M=V;\;z=3)$과 N, P 주개 리간드를 acetonitrile 용매에서 반응시켜 중성 착물 $MCl_3(phda)(MeCN)]과 \; [MCl_3(PPh_3)_2(MeCN)](M=Mo,\;V)$을 합성하였다. Acetone 용액에서 이들 중성 착물과 AgClO_4$를 반응시켜 양이온 착물 $MCl_{3-n}L_2(MeCN)(S)_n](ClO_4)_n$(n=1,2:s=solvent)을 얻었다. 염소가 연결된 $[(MeCN)(phda)ClM({\mu}-Cl)_2M'Cl(PPh_3)_2(MeCN)](ClO_4)_2$ 및 pyrazine이 연결된 $[(MeCN)(phda)Cl_2M({\mu}-pyz)M'Cl_2(PPh_3)_2(MeCN)](ClO_4)_2$형의 호모(M=M'), 헤테로 $(M{\neq}M')$ 이핵 착물을 합성하였다. 합성한 착물들은 원소분석과 적외선, $^1H,\;^13C$ 핵자기 공명 및 전자 흡수스펙트럼을 이용하여 그 특성을 조사하였다.

  • PDF

NiCr과 NiCr-N 박막의 전기저항 특성에 관한 연구 (Study on electrical resistance in NiCr and NiCr-N thin films)

  • 김동진;류제천;김용일;강전홍;유광민;김장환
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 C
    • /
    • pp.1399-1401
    • /
    • 2001
  • We studied on structure and resistivity, temperature coefficient of resistance (TCR) of NiCr and NiCr-N thin resistor films prepared by do reactive magnetron sputtering of NiCr target. It is found that while pure NiCr films are polycrystalline, an addition of nitrogen (N2/(Ar+N2) ratios are between 10% and 70%) into the film is changed into amorphous structure and sheet resistance of films is increased. Measurement temperatures of TCR are ratios of $5^{\circ}C$ per 15min from $25^{\circ}C$ to $130^{\circ}C$. TCR for an as-deposited NiCr-N thin film is varied from positive to negative.

  • PDF

용융염 합성법에 의해 제조된 압전 세라믹(PZT)의 미세구조 및 첨가물의 효과 (Microstructure and Additive Effect of the Piezoelectric ceramics PZT prepared by Molten Salt Synthesis Method)

  • 이수호;조현철;류주현;사공건
    • 한국전기전자재료학회논문지
    • /
    • 제11권5호
    • /
    • pp.378-383
    • /
    • 1998
  • Microstructure and additive effect of Lead Zirconate-Titanate(PZT) ceramics prepared by molten salt synthesis method with additives $Nb_2O_5, Fe_2O_3$ and MnO were investigated.The grain PZT ceramics ws decreased with the increase $Nb^{5+} or Fe^{3+}$ while increased with the increase $Mn^{2+}$ addition. The relative resistivity of PZT ceramics was increased with the increase $Mn^{5+}$ addition, while decreased with the increase $Mn^{2+}$ addition. And the dielectric and the piezoelectric constant of PZT ceramics showed 2,100 and 342pC/N at $Mn^{5+}$ addition of 0.75 mol%, respectively.

  • PDF

디스플레이 확산 방지층 응용을 위한 비대칭 마그네트론 스퍼터로 증착된 질화 티타늄 박막의 특성에 대한 연구 (A Study on Characteristics of TiN Thin Films Deposited by Unbalanced Magnetron Sputtering Method for the Application of Diffusion Barrier Layers in Displays)

  • 박용섭
    • 한국전기전자재료학회논문지
    • /
    • 제32권2호
    • /
    • pp.129-133
    • /
    • 2019
  • TiN thin films were fabricated using an unbalanced magnetron sputtering (UBMS) system, and their structure and surface characteristics as well as their optical and tribological properties were evaluated. The hardness, elastic modulus, adhesive force, surface roughness, and transmittance of the Ti thin films fabricated using the UBMS system were 11.5 GPa, 103 GPa, 27.5 N, 2.45 nm and 20%, respectively. The TiN films prepared with various proportions of nitrogen as the reaction gas exhibited maximum values for the hardness, elastic modulus, critical load, RMS roughness and transmittance of approximately 19.2 GPa, 182 GPa, 27.3 N, 0.98 nm, and 85%, respectively. Moreover, the TiN thin film fabricated under the condition of 30 sccm nitrogen gas showed the optimal physical properties. In summary, the TiN thin films fabricated using the UBMS system exhibited excellent hardness, elastic modulus, adhesion, and smooth surface in addition to good hydrophilic properties.