• Title/Summary/Keyword: N2 addition

Search Result 5,124, Processing Time 0.036 seconds

Grain growth behavior of porous Al2O3 with addition of La2O3 prepared via freeze-casting (동결주조로 성형한 La2O3가 첨가된 Al2O3 다공체의 소결 중 입자성장 거동)

  • Kim, Sung-Hyun;Woo, Jong-Won;Jeon, Sang-Chae
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.32 no.6
    • /
    • pp.231-238
    • /
    • 2022
  • To secure the mechanical strength of porous Al2O3 ceramics, which can be utilized for filters and catalyst supports is essential for their functionality and durability. Superior mechanical strength would be obtained by tailoring the densification and grain growth during sintering. This study deals with grain growth behavior of a freeze-casted Al2O3 with addition of La2O3. In a temperature range between 1400 and 1600℃, variations of average grain size with sintering time and temperature were observed and analyzed with Gtn-G0n = kt and with k = k0exp(-Ea/RT). As a result, n value and activation energy (Ea) for grain growth were calculated as 3 and 489.09 kJ/mol, respectively. These commonly confirms retardation effect of the La addition during sintering of Al2O3 porous structure. More accurate analysis on the La effect can be followed to provide useful guidance for the selection of additives for better mechanical strength in Al2O3 porous structures.

Effect of Air Additions on the Growth Characteristics of the Compound Layer during Oxynitriding in50%NH3+Air+N2 Atmosphere (50% NH3-Air-N2가스분위기에서 Oxynitriding시 Compound Layer의 성장 특성에 미치는 공기첨가효과)

  • Kim, Y.H.;Lee, Y.S.
    • Journal of the Korean Society for Heat Treatment
    • /
    • v.7 no.3
    • /
    • pp.206-218
    • /
    • 1994
  • In 50%$NH_3+Air+N_2$ atmospheres, the effect of air additions on the growth characteristics of the compound layer during oxynitriding at $570^{\circ}C$ for 2hr in carbon and alloy steels has been investigated. The ammount of apparent residual ammonia during oxynitriding has shown to be increased with air additions(9~36 Vol. %) and X-ray diffraction analysis of case oxynitreded has shown that the compound layer consist of ${\varepsilon}-Fe_{2-3}$(N, C) phase and ${\gamma}^{\prime}-Fe_4$(N,C) phase. In the case of carbon steels, the thickness of oxide layer, compound layer and porous layer and the amount of ${\varepsilon}-Fe_{2-3}$(N,C) phase in the compound layer were increased with additions of air in 50%$NH_3+N_2$ atmospheres. At the same gas composition, the thickenss of oxide layer, compound layer and porous layer in alloy steels showed slightly thin layer thickness compared to those of carbon steels and the ${\gamma}^{\prime}-Fe_4$(N,C) phase in the compound layer of alloy steels was found barely. Therefore, the most obvious effect of air addition in the gas nitriding atmosphere has been found to in crease further kinetics of nitriding reaction.

  • PDF

A New Synthetic Studies on Anticancer Agent Methotrexate (Anticancer Agent인 Methotrexate에 대한 새로운 합성 연구)

  • Yu Euy Kyung;Ryu Seoung Ryuall
    • Journal of the Korean Chemical Society
    • /
    • v.37 no.1
    • /
    • pp.136-140
    • /
    • 1993
  • New synthetic method for diethyl N-[4-{[(2,4-diamino-6-yl)methyl]-amino}benzoyl]-L-glutamate(10) which is an intermediate of methotrexate is described. p-Nitrobenzoyl-L-glutamate was obtained via a two-step sequence which involves condensation of p-nitrobenzoyl chloride with diethyl-L-glutamate and Fischer esterification reaction with ethanol. Reductive methylation of diethyl-p-nitrobenzoyl-L-glutamate were carried out by reaction with formic acid and paraformaldehyde in the presence of $PtO_2$ catalyst and yielded diethyl N-(4-methylaminobenzoyl)-L-glutamate(7). It was followed by allylation and iodoazidozation to give the diethyl-p-[N-(2-azido-3-iodopropyl)-N-methyl]aminobenzoyl-L-glutamate(9). The cyclization reaction of compound(9) with 2,4,5,6-tetraaminopyrimidine was carried out by intermolecular nucleophilic substitution to give the desired methotrexate diethylester.

  • PDF

On Factorizing the Discrete Cosine Transform Matrix (DCT 행렬 분해에 관한 연구)

  • 최태영
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.16 no.12
    • /
    • pp.1236-1248
    • /
    • 1991
  • A new fast algorithm for computing the discrete cosine transform(DCT) Is developed decomposing N-point DCT into an N /2-point DCT and two N /4 point transforms(transpose of an N /4-point DCT. TN/t'and)It has an important characteristic that in this method, the roundoff noise power for a fixed point arithmetic can be reduced significantly with respect to the wellknown fast algorithms of Lee and Chen. since most coefficients for multiplication are distributed at the nodes close to the output and far from the input in the signal flow graph In addition, it also shows three other versions of factorization of DCT matrix with the same number of operations but with the different distributions of multiplication coefficients.

  • PDF

Structural characteristics of [N(CH3)4]2CdCl4 determined by 1H MAS NMR, 13C CP/ MAS NMR, and 14N NMR

  • Lee, Seung Jin;Lim, Ae Ran
    • Journal of the Korean Magnetic Resonance Society
    • /
    • v.19 no.1
    • /
    • pp.18-22
    • /
    • 2015
  • The structural geometry of $[N(CH_3)_4]_2CdCl_4$ in a hexagonal phase is studied by $^1H$ MAS NMR, $^{13}C$ CP/MAS NMR, and $^{14}N$ NMR. The changes in the chemical shifts for $^{13}C$ and $^{14}N$ in the hexagonal phase are explained by the structural geometry. In addition, the temperature dependencies of the spin-lattice relaxation time in the rotating frame $T_{1{\rho}}$ for $^1H$ MAS NMR and $^{13}C$ CP/MAS NMR are measured.

Wetting Phenomena between Sealing Glass and Free Cutting Steel (접합유리와 쾌삭강간의 Wetting 현상)

  • Kim, Heung;Kim, Chong-Hee
    • Journal of the Korean Ceramic Society
    • /
    • v.19 no.1
    • /
    • pp.24-34
    • /
    • 1982
  • The effect of the several variables on wetting of AISIB1113 steel by molten glass was studied by Sessible-drop method. Experimental variables were temperature, firing atmospheres, Fe2O3 addition to the sealing glass and steel surface conditions. The degree of wetting in terms of contact angles between molten glass and metal tested at different test conditions was analyzed by using Young's equation. The results showed that contact angles in H2 atmosphere in the glass metal systems were high but in N2 atmosphere, were small for studied glass metal systems. Especially, when the glass drop was in contact with oxidized steel in N2 atmosphere, The best adherence with contact angle of approximately 9°was obtained. In the case of Fe2O3 addition in glass contact angles subtantially increased due to the increase of surface tension of glass. Wetting phenomena were also discussed under the basis of these experimental results.

  • PDF

Comparison of the effect of peat moss and zeolite on ammonia volatilization as a source of fine particulate matter (PM 2.5) from upland soil

  • Park, Seong Min;Hong, Chang Oh
    • Korean Journal of Agricultural Science
    • /
    • v.46 no.4
    • /
    • pp.907-914
    • /
    • 2019
  • Ammonia (NH3) that reacts with nitric or sulfuric acid in the air is the major culprit contributing to the formation of fine particulate matter (PM2.5). NH3 volatilization mainly originates from nitrogen fertilizer and livestock manure applied to arable soil. Cation exchange capacity (CEC) of peat moss (PM) and zeolite (ZL) is high enough to adsorb ammonium (NH4+) in soil. Therefore, they might inhibit volatilization of NH3. The objective of this study was to compare the effect of PM and ZL on NH3 volatilization from upland soil. For this, a laboratory experiment was carried out, and NH3 volatilization from the soil was monitored for 12 days. PM and ZL were added at the rate of 0, 1, 2, and 4% (wt wt-1) with 354 N g m-2 of urea. Cumulative NH3-N volatilization decreased with increasing addition rate of both materials. Mean value of cumulative NH3-N volatilization across application rate with PM was lower than that with ZL. CEC increased with increasing addition rate of both materials. While the soil pH increased with ZL, it decreased with PM. Increase in CEC resulted in NH4+ adsorption on the negative charge of the external surface of both materials. In addition, decrease in soil pH hinders the conversion of NH4+ to NH3. Based on the above results, the addition of PM or ZL could be an optimum management to reduce NH3 volatilization from the soil. However, PM was more effective in decreasing NH3 volatilization than ZL due to the combined effect of CEC and pH.

SEMIPRIME RINGS WITH INVOLUTION AND CENTRALIZERS

  • ANSARI, ABU ZAID;SHUJAT, FAIZA
    • Journal of applied mathematics & informatics
    • /
    • v.40 no.3_4
    • /
    • pp.709-717
    • /
    • 2022
  • The objective of this research is to prove that an additive mapping T : R → R is a left as well as right centralizer on R if it satisfies any one of the following identities: (i) T(xnyn + ynxn) = T(xn)yn + ynT(xn) (ii) 2T(xnyn) = T(xn)yn + ynT(xn) for each x, y ∈ R, where n ≥ 1 is a fixed integer and R is any n!-torsion free semiprime ring. In addition, we talk over above identities in the setting of *-ring(ring with involution).

EFFECT OF SUPPLEMENTARY UREA, GLUCOSE AND MINERALS ON THE IN VITRO DEGRADATION OF LOW QUALITY FEEDS

  • Oosting, S.J.;Verdonk, J.M.H.J.;Spinhoven, G.G.B.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.2 no.4
    • /
    • pp.583-590
    • /
    • 1989
  • Increasing levels of ammonia-N in the rumen fluid used for in vitro incubation were achieved by supplementation of the ration of the donor cows with urea and by addition of urea either with or without glucose to the rumen fluid after collection. The ration of the donor animals consisted of wheat straw (80%) and maize silage (20%). During the second half of the experiment the basal ration was supplemented with a mineral mixture. Wheat straw, Guinea grass and two rice straw varieties were incubated with the various kinds of rumen fluid. Parameters studied were: solubility, apparent organic matter disappearance after 48 hours of incubation ($OMD_{48}$), rate of organic matter degradation from 0 to 24 hours of incubation ($k_1$) and from 24 to 95 hours ($k_2$). The concentration of ammonia-N in the rumen fluid at which 95% of the maximal $OMD_{48}$ and k1 were reached (88.2 and 100.0 mg/l) were independent of the feed. With regard to the $k_2$ the required ammonia-N concentration to reach 95% of the maximal $k_2$ differed per feed. Mineral supplementation increased the OMD48 and $k_1$, but not the solubility and $k_2$. Glucose addition in combination with urea had no beneficial effect compared to urea supplementation alone.

Effective Treatment of N-Nitrosodimethylamine using Advanced Oxidation Process (UV Process) and Toxicity Evaluation (고도산화공정(UV공정)을 이용한 NDMA의 효율적인 처리와 독성 평가)

  • Song, Won-Yong;Chang, Soon-Woong
    • Journal of Korean Society on Water Environment
    • /
    • v.25 no.1
    • /
    • pp.90-95
    • /
    • 2009
  • This study investigates the oxidative degradation of N-nitrosodimethylamine (NDMA), a probable human carcinogen, by advanced oxidation process (i.e., UV process). The experiments were performed with various pH, initial concentration, UV intensity, and addition of $H_2O_2$ or $TiO_2$ on UV process. The results showed that the direct UV photolysis was the most effective treatment method. The lower pH, intial concentration and higher intensity of UV stimulated higher NDMA removal. However, addition of oxidant ($H_2O_2$, $TiO_2$) slows down photochemical treatment of NDMA since the oxidant can filter out the UV light and block it to reach the NDMA molecules. Dimethylamine (DMA) and nitrite were found to be a major byproduct from NDMA oxidation. To evaluate the chronic toxicity effects of UV-treated NDMA on the growth of microalgae, "Skeletonema costatum", was studied as long term experiments. Results demonstrated that after the 13 days exposure the chronic toxicity was decreased about 15% with application of UV process on NDMA degradation.