• The Journal of Advanced Prosthodontics
• /
• v.7 no.1
• /
• pp.27-31
• /
• 2015

PURPOSE. The purpose of this report was to evaluate the effect of the fabrication method and material type on the fracture strength of provisional crowns. MATERIALS AND METHODS. A master model with one crown (maxillary left second premolar) was manufactured from Cr-Co alloy. The master model was scanned, and the data set was transferred to a CAD/CAM unit (Yenamak D50, Yenadent Ltd, Istanbul, Turkey) for the Cercon Base group. For the other groups, temporary crowns were produced by direct fabrication methods (Imident, Temdent, Structur Premium, Takilon, Systemp c&b II, and Acrytemp). The specimens were subjected to water storage at $37^{\circ}C$ for 24 hours, and then they were thermocycled (TC, $5000{\times}$, $5-55^{\circ}C$) (n=10). The maximum force at fracture (Fmax) was measured in a universal test machine at 1 mm/min. Data was analyzed by non-parametric statistics (${\alpha}$=.05). RESULTS. Fmax values varied between 711.09-1392.1 N. In the PMMA groups, Takilon showed the lowest values (711.09 N), and Cercon Base showed the highest values (959.59 N). In the composite groups, Structur Premium showed the highest values (1392.1 N), and Acrytemp showed the lowest values (910.05 N). The composite groups showed significantly higher values than the PMMA groups (P=.01). CONCLUSION. Composite-based materials showed significantly higher fracture strengths than PMMA-based materials. The CADCAM technique offers more advantages than the direct technique.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.3
• /
• pp.832-839
• /
• 2021

We tried to investigate the effects of substituent position, temperature, and additives such as NaCl and n-butanol on the solubilizations of cresol isomers by tetradecyltrimethylammonium bromide (TTAB), using the UV-Vis spectrophotometric method. The measured solubilization constants (K_s) values for each cresol isomer increased in the order o-cresolo and ∆H^o values for the solubilizations of cresols were all negative values but the ∆S^o values were all positive values within the measured ranges. The values of ∆G^o increased also with increasing the concentration of n-butanol but decreased with increasing the concentration of NaCl. From these facts, we could conclude that both the enthalpy and entropy changes contribute together for the solubilizations of cresols isomers by cationic surfactant of TTAB and they are solubilized in the polar palisade region or at the surface of micelle.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.5
• /
• pp.535-541
• /
• 1997

The effect of concentration of each solution( HCI, $H_2SO_4$ and $HNO_3$), scan rate and polished surface condition on the corrosion of AISI 304 Stainless Steel were investigated, utilizing the Method ASTM G5 - 87. It can be concluded that: 1) For the same concentration(i.e. 1N) of each solution the corrosion rate is the highest in HCI and lowest in $HNO_3$. Also, the difference of values of $i_{cirt}$ generated for each solution is significant. 2) As the concentration of the solution $H_2SO_4$ is increased (O.5N, 1N, 2N) the values of $E_{cor}$ $i_{crit}$ and $i_{p}$ are increased. 3) In case of existence of SCN ion of O.OlN, the values of iCTIt and ip generated are approximately 100 times and 1.4 times higher respectively, than in the case of non - existence of $SCN^{-}$. However the existence of $SCN^{-}$ doesn't affect the value of $E_{cor}$ and $E_{p}$. 4) The values of $i_{crit}$ and $i_{p}$ are increased due to the increase of scan rate. But the values of $E_{cor}$ and $E_{p}$ do not depend on the scan rate. 5) The $i_{p}$ value depends greatly on oxygen in the solution, but the changes in values of $E_{cor}$ $i_{crit}$ and $E_{b}$ due to the oxygen are insignificant. 6) If a component is polished using #400, #600 and #800 wet polish paper, the effect of surface condition on variations of values of $i_{crit}$ and $i_{p}$ is slightly significant.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.3
• /
• pp.439-446
• /
• 2014

Many studies on methane ($CH_4$) and nitrous oxide ($N_2O$) emissions from livestock industries have revealed that livestock production directly contributes to greenhouse gas (GHG) emissions through enteric fermentation and manure management, which causes negative impacts on animal environment sustainability. In the present study, three essential values for GHG emission were measured; i.e., i) maximum $CH_4$ producing capacity at mesophilic temperature ($37^{\circ}C$) from anaerobically stored manure in livestock category ($B_{0,KM}$, Korean livestock manure for $B_0$), ii) $EF_{3(s)}$ value representing an emission factor for direct $N_2O$ emissions from manure management system S in the country, kg $N_2O-N$ kg $N^{-1}$, at mesophilic ($37^{\circ}C$) and thermophilic ($55^{\circ}C$) temperatures, and iii) $N_{ex(T)}$ emissions showing annual N excretion for livestock category T, kg N $animal^{-1}$ $yr^{-1}$, from different livestock manure. Static incubation with and without aeration was performed to obtain the $N_2O$ and $CH_4$ emissions from each sample, respectively. Chemical compositions of pre- and post- incubated manure were analyzed. Contents of total solids (% TS) and volatile solid (% VS), and the ratio of carbon to nitrogen (C/N) decrease significantly in all the samples by C-containing biogas generation, whereas moisture content (%) and pH increased after incubation. A big difference of total nitrogen content was not observed in pre- and post-incubation during $CH_4$ and $N_2O$ emissions. $CH_4$ emissions (g $CH_4$ kg VS-1) from all the three manures (sows, layers and Korean cattle) were different and high C/N ratio resulted in high $CH_4$ emission. Similarly, $N_2O$ emission was found to be affected by % VS, pH, and temperature. The $B_{0,KM}$ values for sows, layers, and Korean cattle obtained at $37^{\circ}C$ are 0.0579, 0.0006, and 0.0828 $m^3$ $CH_4$ kg $VS^{-1}$, respectively, which are much less than the default values in IPCC guideline (GL) except the value from Korean cattle. For sows and Korean cattle, $N_{ex(T)}$ values of 7.67 and 28.19 kg N $yr^{-1}$, respectively, are 2.5 fold less than those values in IPCC GL as well. However, $N_{ex(T)}$ value of layers 0.63 kg N $yr^{-1}$ is very similar to the default value of 0.6 kg N $yr^{-1}$ in IPCC GLs for National greenhouse gas inventories for countries such as South Korea/Asia. The $EF_{3(s)}$ value obtained at $37^{\circ}C$ and $55^{\circ}C$ were found to be far less than the default value.

• Communications of the Korean Mathematical Society
• /
• v.35 no.1
• /
• pp.301-319
• /
• 2020

In this paper, we show that the system of difference equations $x_n={\frac{ay^p_{n-1}+b(x_{n-2}y_{n-1})^{p-1}}{cy_{n-1}+dx^{p-1}_{n-2}}}$, $y_n={\frac{{\alpha}x^p_{n-1}+{\beta}(y_{n-2}x_{n-1})^{p-1}}{{\gamma}x_{n-1}+{\delta}y^{p-1}_{n-2}}}$, n ∈ ℕ₀ where the parameters a, b, c, d, α, β, γ, δ, p and the initial values x-2, x-1, y-2, y-1 are real numbers, can be solved. Also, by using obtained formulas, we study the asymptotic behaviour of well-defined solutions of aforementioned system and describe the forbidden set of the initial values. Our obtained results significantly extend and develop some recent results in the literature.

• Kyungpook Mathematical Journal
• /
• v.55 no.4
• /
• pp.983-996
• /
• 2015

In the paper A new parameter for Ramanujan's theta-functions and explicit values, Arab J. Math. Sc., 18 (2012), 105-119, Saikia studied the parameter $A_{k,n}$ involving Ramanujan's theta-functions ${\phi}(q)$ and ${\psi}(q)$ for any positive real numbers k and n and applied it to find explicit values of ${\psi}(q)$. As more application to the parameter $A_{k,n}$, in this paper we prove a new general theorem for explicit evaluation of Ramanujan-$G{\ddot{o}}llnitz$-Gordon continued fraction K(q) in terms of the parameter $A_{k,n}$ and give examples. We also find some new explicit values of the parameter $A_{k,n}$ and offer reciprocity theorems for the continued fraction K(q).

• Journal of the Chungcheong Mathematical Society
• /
• v.24 no.1
• /
• pp.85-89
• /
• 2011

We present characterizations of the Pareto distribution by the independent property of upper record values in such a way that F(x) has a Pareto distribution if and only if $\frac{X_{U(n)}}{X_{U(m)}}$ and $X_{U(m)}$ are independent for $1{\leq}m. Futhermore, the characterizations should find that F(x) has a Pareto distribution if and only if $\frac{X_{U(n)}}{X_{U(n)}{\pm}X_{U(m)}}$ and $X_{U(m)}$ are independent for $1{\leq}m.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.2
• /
• pp.162-167
• /
• 1993

We have investigated analytically and numerically on both the generalized dimension D sub(n) and the fractal dimensionality f sub($\alpha$) in the dissipative Willbrink map. and discussed both the mode-locking phenomenon and the dissipative trajectory when z=0.03, b=0.9 and K sub(d) =0.272313668. In the mode-locking phenomenon. we find that the generalized dimension D sub(-n) and superconverged $\delta$ sub(n) are very close to D sub(-$\infty$) =0.92403 and $\delta$ sub($\infty$) =2.16442 even for n～20 as listed in Table 1. In dissipative trajectory, the values of D sub(+n) and D sub(-n) for n～20 are estimated to be very close to D sub(+$\infty$) =0.63267 and D sub(-$\infty$) =1.89802 on the circle map. Thus, the values of the generalized dimension as nlongrightarrow$\infty$ on dissipative Willbrink map are expected to be the same results as those for the circle map and to have the universal scaling exponents for a special scaling structure when the values of overbar(w), z, b, and k sub(d) have the different values.

• Journal of applied mathematics & informatics
• /
• v.27 no.3_4
• /
• pp.955-961
• /
• 2009

In this paper, we establish some characterizations which is satisfied by the independence of the upper record values from the Pareto distribution. We prove that $X\;{\in}\;PAR(1,\;{\beta})$, $\beta$ > 0, if and only if $\frac{X_{U(n)}}{X_{U(m)}}$ and $X_{U(m)}$, $1\;{\le}\;m\;<\;n$ are independent. We show that $X\;{\in}\;PAR(1,\;{\beta})$, $\beta$ > 0 if and only if $\frac{X_{U(n)}+X_{U{(n+1)}}}{X_{U(n)}}$ and $X_{U(n)}$, $n\;{\ge}\;1$ are independent. And we characterize that $X\;{\in}\;PAR(1,\;{\beta})$, $\beta$ > 0, if and only if $\frac{X_{U(n)}}{X_{U(n)}+X_{U{(n+1)}}}$ and $X_{U(n)}$, $n\;{\ge}\;1$ are independent.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.5
• /
• pp.155-162
• /
• 2021

n-step TD learning is a combination of Monte Carlo method and one-step TD learning. If appropriate n is selected, n-step TD learning is known as an algorithm that performs better than Monte Carlo method and 1-step TD learning, but it is difficult to select the best values of n. In order to solve the difficulty of selecting the values of n in n-step TD learning, in this paper, using the characteristic that overestimation of Q can improve the performance of initial learning and that all n-step returns have similar values for Q ≈ Q^*, we propose a new learning target, which is composed of the maximum and the mean of all k-step returns for 1 ≤ k ≤ n. Finally, in OpenAI Gym's Atari game environment, we compare the proposed algorithm with n-step TD learning and proved that the proposed algorithm is superior to n-step TD learning algorithm.