• Microbiology and Biotechnology Letters
• /
• v.15 no.6
• /
• pp.414-419
• /
• 1987

Temperature-sensitive revertant could grow on acetic acid at 23$^{\circ}C$ but not at 33$^{\circ}C$, MX9-11RX8, isolated from mutant deficient in the activity of isocitrate lyase and its properties were investigated. The activity of isocitrate lyase and specific rate of isocitrate lyase synthesis decreased according to in-crease culture temperature from 23 to 33 $^{\circ}C$ in acetic acid as carbon source. A rapid cessation of in-crease enzyme activity observed when the temperature was shift up from 23 to 33$^{\circ}C$ but cell growth was continued. On the other hand, the revertant also exhibited temperature-sensitive in n-hexade-cane medium as carbon source, and the amount of isocitric acid was nearly equal produced to that at 23 $^{\circ}C$ when the temperature shift up from 23 to 33 $^{\circ}C$.

• Journal of Energy Engineering
• /
• v.16 no.3
• /
• pp.120-127
• /
• 2007

The purpose of this study is experimentally to analyze that the fuel mass fractions of multi-component mixed fuels have an effect on the characteristics of spray ignition and combustion under the ambient conditions of diesel combustion fields. The characteristics of ignition and combustion were investigated by chemiluminescence images and direct photography. The experiments were conducted in the RCEM(rapid compression expansion machine) with optical access. Multi-component fuels mixed with i-octane, n-dodecane and n-hexadecane are injected in RCEM by the electronic control of common rail injector. Experimental conditions set up 42, 72 and 112 MPa in injection pressure, 700, 800 and 900 K in ambient gas temperature. The results show that the ignition delay was dependent on high cetane number. In case of low ambient temperature, the more low boiling point fuels were mixed, the lower luminance regime had a remarkable effect and also shortened diffusion combustion by increasing heat release rate.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.6
• /
• pp.72-79
• /
• 2014

Cavitation generated by ultrasonic irradiation can enhance the diffusional transport of organic contaminants from soil surfaces or pores. Therefore, ultrasound soil washing can be an alternative of traditional soil washing process. In this study, soil was artificially contaminated with n-tetradecane, n-hexadecane and phenanthrene. A plate type ultrasonic reactor at 25 kHz frequency and 1000W power was used for laboratory soil washing experiments. Ultrasonic soil washing efficiency was compared with those of traditional soil washing using mechanical mixing. Various operational parameter such as soil/liquid ratio, irradiation time, particle size, and soil organic matter content was tested to find out the optimum condition. It was found that ultrasonic soil washing demonstrates better performance than mechanical soil washing. Optimum soil:liquid ratio for ultrasonic soil washing was 1 : 5. Desorption of organic contaminants from soils by ultrasonic irradiation was relatively fast and reached equilibrium within 10 minute. However, decrease in the soil particle sizes by ultrasonic irradiation results in re-adsorption of contaminants to soil phase. It was also observed that soil particle size distribution and soil organic matter content have significant effects on the efficiency of ultrasonic soil washing.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.1
• /
• pp.13-30
• /
• 2024

Swietenia mahagoni is one of the commercial timbers in Indonesia. Mahogany heartwood is an important characteristic as it relates to the natural durability and aesthetics of the wood. Lipophilic extractives are known to be involved in the heartwood formation process. Therefore, this study aims to determine the lipophilic compounds associated with heartwood formation. The n-hexane extract from sapwood and heartwood samples (1 to 5 years) was analyzed by gas chromatography-mass spectrometry. The results showed that the content of n-hexane extract ranged from 0.76% to 2.45% based on dry wood. The main group of compounds identified in the lipophilic fraction consisted of sterols (β-sitosterol, stigmasterol, campasterol, and cyclolaudenol), fatty acids (palmitic, oleic, linoleic, and stearic acid), and hydrocarbons (pentadecane, 1-octadecane, hexadecane, cyclotetracosane, cycloeicosane, and cyclooctacosane) after heartwood formation. In addition, the hydrocarbon fraction was the largest, followed by sterols, fatty acids, and 1-heneicosanol. In the radial variation, the distribution of fatty acids was greater in the sapwood than in the heartwood (4-year-old). However, the reverse pattern was found at the age of 5 years. The lipophilic fraction was generally more abundant in the heartwood compared to the sapwood, especially at 5 years of age, with much higher levels than when the heartwood was forming (4 years). These findings show that when the heartwood formation begins, the lipid composition was not fully metabolized at the beginning of heartwood formation compared to 5-year-old trees.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.1
• /
• pp.53-61
• /
• 2013

The characteristics of methane production from pig manure slurry was investigated using anaerobic digestor combined with compost filtration bed. In this study, raw pig manure slurry was digested in mesophilic rectangular digester (effective volume $250m^3$) for 25 days and anaerobic digestion wastewater was filtered through compost filtration bed, which is composed of double layer, sawdust and chaff. The characteristics of anaerobic digestion wastewater were BOD 1,800 mg/L, COD 3,500 mg/L, SS 11,800 mg/L, T-N 1,200 mg/L and T-P 350 mg/L. After the filtration process, the contents of BOD, COD, SS, T-N and T-P of the anaerobic digestion wastewater were reduced by 97%, 62%, 89%, 39% and 57%, respectively. The concentrations of N, $P_2O_5$, and $K_2O$ of the leachate were 1,024, 111 and 407 mg/L, respectively. However, there was no odor emitted from the leachate.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.677-683
• /
• 2005

In this work, the effect of additives such as solvent, sodium dodecyl sulfate and NaCl on microemulsion phase behavior and flux removal efficiency in systems containing commercial alkyl ethoxylates nonionic surfactant was investigated. The addition of a n-hydrocarbon as a solvent produced on O/W (Oil/Water) microemulsion phase over a wider range of temperature and cosurfactant to surfactant ratios. Especially, the addition of n-hexadecane to the surfactant system, which was the most hydrophobic solvent among the solvents used in this study, produced a microemulsion phase over a wide range of temperatures and promoted formation of a microemulsion phase at lower temperatures. The candidate for cleaner samples, prepared from phase behavior experiments, showed excellent removal efficiency for abietic acid at $40^{\circ}C$. These data suggested the potential applicability of hydrocarbons to actual cleaner formulations.

• Food Science and Preservation
• /
• v.23 no.4
• /
• pp.471-478
• /
• 2016

For the distribution of fresh produce, the thermoelectric cooling system combined with thermo electric materials (TEM) and phase change material (PCM) was studied. The PCM used this study was produced by in-situ polymerization technology which referred microencapsulation of hydrocarbon (n-tetradecane and n-hexadecane). In this study, quality characteristics of bell peppers in thermoelectric cooling system combined with TEM and PCM were analyzed and control was placed in an EPS (expanded polystyrene) box. As a result of quality characteristics analysis, weight of bell peppers decreased and moisture content of bell peppers was 90.96~94.43% during storage. Vitamin C content of bell pepper decreased during storage and reduction ratio of control was higher than that of BPT-5 treatment(bell pepper in thermoelectric cooling system with PCM which is kept the temperature at $5^{\circ}C$). The result of color value, on 21 day, ${\Delta}E$ value of BPT-5 treatment was 5.05 while that of control was 41.8. On 21 day, total bacteria count of BPT-5 treated bell pepper shown less than that of control. In conclusion, it suggested that the thermoelectric cooling system combined with PCM improved quality of fresh produce during transportation and storage.