• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.133-134
• /
• 2000

Effect of nitrogen doping on field emission characteristics of patterned Diamond-like Carbon (DLC) films was studied. The patterned DLC films were fabricated by the method reported previously[1]. Nitrogen doping in DLC film was carried out by introducing $N_2$ gas into the vacuum chamber during deposition. Higher emission current density of $0.3{\sim}0.4$ $mA/cm^2$ was observed for the films with 6 at % N than the undoped films but the emission current density decreased with further increase of N contents. Some changes in CN bonding characteristics with increasing N contents were observed. The CN bonding characteristics which seem to affect the electron emission properties of these films were studied by Raman spectroscopy, x-ray photoemission spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR). The electrical resistivity and the optical band gap measurements showed consistence with the above analyses.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.324-327
• /
• 1988

The photovoltaic performances of a-si : H$n^{+}-p-p^{+}$ solar cells have been investigated. The optimum substrate temperature for the deposition of a-Si : H $n^{+}-p-p^{+}$ cell decreases with increasing doping concentration of the p-layer, and is less than 200$^{\circ}C$ when the gas phase doping concentration is higher than 10 ppm. The results can be explained as the dependences of substrate temperature for the relaxation of silicon atoms and for the bonded hydrogen concentration in the p-layer.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.11a
• /
• pp.98-98
• /
• 1996

• Proceedings of the Korean Vacuum Society Conference
• /
• 2002.02a
• /
• pp.124-124
• /
• 2002

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.1
• /
• pp.19-23
• /
• 2018

In a Pb-included piezoelectric composition, $Sr_yPb_{1-y}[(Zn_{1/3}Nb_{2/3})_x-(Ni_{1/3}Nb_{2/3})_{0.2}-(Zr_{0.46}Ti_{0.54})_{0.8-x}]O_3$ was selected in order to attain high piezoelectric properties. According to the PZN ratio (x) and the amount of Sr doping (y), the crystal structure, microstructure and piezoelectric properties were measured and evaluated. In the case of Sr 4 mol% doping, the piezoelectric properties were the highest for a PZN ratio of 0.1. In this condition, the grain size was larger and the intensity was higher. With the PZN ratio fixed and varying the Sr doping, the piezoelectric properties increased until 10 mol% doping and then decreased for over 12 mol% doping. In the case of x＝0.1 and y＝10 mol%, the best piezoelectric properties were obtained, i.e., $d_{33}=660pC/N$ and $k_p=68.5%$, and these values seem to be related to the grain size and crystal structure.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.06a
• /
• pp.13-13
• /
• 2001

현재 초고속 가공 공구의 국내 시장은 150억원이며 향후 3년 내에 1500억원으로 급성 장활 전망이다. 무윤활 초고속 가공을 실현하기 위해서는 윤활특성이 우수한 초고경도 코팅의 개발이 필요하며 이를 통해 기계설비의 수명향상과 폐유문제 해결을 기대할 수 있다. 기존의 고체윤활 코팅은 초고경도 코팅의 상부에 $MoS_2$, Graphite 등 윤활성 박막을 합성하였으나, 이들은 Hexagonal 구조의 연질 박막이며 수분이 존재하는 대기중에서는 윤활 및 내마모 특성이 급격히 저하된다. 환경친화 대체소재 개발의 일원으로 TiN, ZrN 박막 등이 이미 개발되었고 기계적 특성이 우수하여 널리 응용되고 있으나 아직 경도(약 20GPa 내외) 및 윤활성의 한계 (마찰계수 $\mu=O.6$)를 극복하지 못하고 있다. TiN박막 위의 Cu의 첨가는 TiN의 구조와 성질을 크게 변화시키는 것으로 알려져 있다. 따라서 본 연구에서는 TiN 기지 위에 Cu를 도핑함으로써 경도의 상승을 통환 내구력의 향상과 마찰계수의 감소를 통한 윤활성의 향상을 보고자하였다. TiN합성의 안정화를 위하여 magnetron sputtering과 arc ion pIatingd을 병용한 hybrid 공정을 이용하였다. Cu첨가에 따른 결정 성장 거동의 변화를 보기 위해 XRD 분석을 실행하였고, EDS 분석을 통해 Cu target 전류밀도에 의한 기지내의 Cu의 함량변화를 고찰하였으며, 경도 및 윤활특성을 고찰하기 위해서 경도 시험과 마모 시험(ball-on disc type test)를 하였다.

• Journal of the Korean Vacuum Society
• /
• v.12 no.3
• /
• pp.193-199
• /
• 2003

Ti-Cu-N and Ti-Ag-N nanocomposite films with various copper and silver contents were synthesized by arc ion plating and magnetron sputtering hybrid system. The structure and mechanical properties of these films were found to be dependant on the copper and silver concentration. The maximum hardness of Ti-Cu-N and Ti-Ag-N films showed approximately 40 ㎬ below 2 at%Me. The role of soft metallic phase in Ti-Me-N nanosturctured films containing one hard and one soft phase is also discussed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.6
• /
• pp.235-242
• /
• 2018

High temperature electrical conductivity of Aluminum Nitride (AlN) ceramics sintered with $Y_2O_3$ as a sintering aid has been investigated with respect to various sintering conditions and MgO-dopant. When magnesium oxide is added as a dopant, liquid glass-film and crystalline phases such as spinel, perovskite are formed as second phases, which affects their electrical properties. According to high temperature impedance analysis, MgO doping leads to reduction of activation energy and electrical resistivity due to AlN grains. On the other hand, the activation energy and electrical resistivity due to grain boundary were increased by MgO doping. This is a result of the formation of liquid glass film in the grain boundary, which contains Mg ions, or the elevation of schottky barrier due to the precipitation of Mg in the grain boundary. For the annealed sample of MgO doped AlN, the electrical resistivity and activation energy were increased further compared to MgO doped AlN, which results from diffusion of Mg in the grains from grain boundary as shown in the microstructure.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.1158-1164
• /
• 2011

5-Methoxy-N,N-diisopropyltryptamine (5-MeO-DIPT), a psychoactive tryptamine derivative, is a hallucinogenic drug of abuse. In this study, 5-OH-DIPT and its metabolites were identified and the quantitative method was developed and validated by using hydrophilic interaction chromatography-tandem mass spectrometry (HILICMS/MS). Chromatographic separation was achieved on an Atlantis HILIC silica column ($5{\mu}m$, $100{\times}2.1\;mm$). The metabolites of 5-MeO-DIPT in rat urine were characterized via Q1 scanning and product ion scanning. As a consequence, 5-MeO-IPT, 5-OH-DIPT, 6-OH-5-MeO-DIPT and their glucuronide conjugates were detected and identified as the metabolites of 5-MeO-DIPT. Subsequently, a quantitative method for 5-MeO-DIPT and its major metabolites, 5-MeO-IPT and 5-OH-DIPT, was developed in multiple reactions monitoring (MRM) mode. The calibration curves for all analytes evidenced good linearity over the concentration range of 1-1000 ng/mL with linear correlation co-efficients ($r^2$) in excess of 0.99. The intra- and inter-day accuracy and precision were 92.2-110.2% and 1.5-9.9%, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.244-244
• /
• 2010

Doping process of crystalline silicon solar cell process is very important which is as influential on efficiency of solar. Doping process consists of pre -deposition and diffusion. Each of these processes is important in the process temperature and process time. Through these process conditions variable, p-n junction depth can be controled to low and high. In this paper, we studied a optimized doping pre-deposition temperature for high solar cell efficiency. Using a $200{\mu}m$ thickness multi-crystalline silicon wafer, fixed conditions are texture condition, sheet resistance($50\;{\Omega}/sq$), ARC thickness(80nm), metal formation condition and edge isolation condition. The three variable conditions of pre-deposition temperature are $790^{\circ}C$, $805^{\circ}C$ and $820^{\circ}C$. In the $790^{\circ}C$ pre-deposition temperature, we achieved a best solar cell efficiency of 16.2%. Through this experiment result, we find a high efficiency condition in a low pre-deposition temperature than the high pre-deposition temperature. We optimized a pre-deposition temperature for high solar cell efficiency.