• 치위생과학회지
• /
• 제12권6호
• /
• pp.660-665
• /
• 2012

본 연구는 회전법과 변형 스틸맨법간의 치면세균막 감소효과를 비교하기 위하여 천안 소재 대학교 31명의 대학생을 대상으로 무작위 배정한 순수실험을 설계하여 치면세균막 관리프로그램을 시행한 결과 다음과 같은 결과를 얻었다. 1. 중재 전후에 따른 각 잇솔질의 치면세균막 관리를 비교한 결과 중재 전에 측정한 SPS Score와 ${\Delta}R30$에서 두 잇솔질 방법간의 차이는 나타났으나(p<0.05), 나머지 측정값들과 중재 후의 측정값에서 유의한 관련성을 보이지 않았다(p>0.05). 2. 각 잇솔질 방법에 따른 중재 전 후의 치면세균막 관리를 비교한 결과 PCR, QLF-PCR, ${\Delta}R30$, ${\Delta}R60$에서 회전법과 변형 스틸맨법 집단은 통계적으로 유의한 차이가 있었다(p<0.05). 또한, 회전법보다 변형 스틸맨법 집단에서 치면세균막 지수는 더 큰 감소를 보였고, 잇솔질 교육 중재를 실행한 후 치면세균막 지수가 감소하는 것으로 나타났다. 3. PCR과 QLFD 촬영 측정값의 관계에서 PCR과 육안검사 QLF-PCR의 관계, SPS Score와 그 하위 척도 ${\Delta}R$값들의 상관관계는 보였으나, PCR와 QLF값의 상관관계는 보이지 않았다. 이상의 결과를 종합해보면, 회전법과 변형스틸맨법의 치면세균막 관리 효과는 통계적으로 유의하지 않았으나, 회전법보다 변형 스틸맨법 집단에서 치면세균막 감소차이는 더 큰 것으로 확인되었고, 잇솔질 교육을 실행함으로써 치면세균막 지수가 감소하는 것으로 나타났다.

• 한국지진공학회논문집
• /
• 제5권4호
• /
• pp.17-26
• /
• 2001

한반도 남부에서 발생 가능한 강지진동의 최대 지반운동과 주파수에 따른 특성을 추계학적 모사법을 이용하여 간접적으로 추정하였다. 또한 추계학적 모사법에 적용할 진원과 지진파 감쇠에 관한 입력자료를 계산하였다. 응력강하($\Delta$$\sigma$)는 한반도 남부와 미국 동부 및 중국의 연구결과를 종합하여 100-bar로 추정하였다. 감쇠상수는 x는 1996년 9월부터 1997년 12월까지 발생한 지진 중 비교적 기록상태가 양호한 57개의 관측자료를 이용하여 계산하였으며 진원거리(R)에 대하여 0.00112+0.000224 R로 추정되었다. 이와 같은 응력강하($\Delta$$\sigma$)와 감쇠상수 x등의 입력자료를 추계학적 모사법에 적용한 결과를 바탕으로 진원거리에 따른 강진동 감쇠공식을 유도하였다.한 결과를 바탕으로 진원거리에 따른 강진동 감쇠공식을 유도하였다.

• 대한화학회지
• /
• 제47권1호
• /
• pp.13-18
• /
• 2003

요(urine) 시료 중의 칼륨 이론을 전위차법으로 분석하기 위한 전처리 방법을 개발하기 위하여 초음파의 분해 효과를 이용하였다. $NH_4{^+}$의 농도가 상대적으로 높은 요 시료 속에서 첨가한 $K^+$에 대한 검정 곡선을 구하기 위하여 $NH_4{^+}$에 대한 $K^+$의 선택성이 좋은 N-(4'-benzo-15-crown-5)-anthracene-9-imine을 이온선택성 전극 물질로 사용하였다. 1.0M $HNO_3$으로 산성화시킨 요 시료를 초음파로 100 s 동안 전처리시키려면 요 중의 단백질을 85.1%까지 제거시킬 수 있었다. 이렇게 전처리된 시료에서 얻은 막전극의 감응 전위에 대한 기울기는 log [$K^+$]=-5~-1의 직선범위(r=0.9997)에서 54.6(${\pm}0.2,\;n=5$) mV/decade였다. $HNO_3$으로 초음파처리한 요 시료에 산화제인 $H_2O_2$를 첨가하면 $HNO_3$만으로 전처리시켰을 때보다 단백질 제거율이 10% 증가하여 최대 95%까지 제거되었다. 요 시료에 첨가한 $K^+$에 대한 감응 전위의 기울기 또한 56.7(${\pm}0.1,\;n=3$) mV/dacade로 증가하였다. 검정 곡선을 연속적으로 얻었을 때, 막전극 표면을 초음파로 세척하여 20회까지 안정한 감응 기울기를 얻을 수 있었다. 이 결과들로부터 초음파를 이용한 전처리법은 간단하고, 짧은 시간 내에 요 중의 단백질을 약 95%까지 제거시켜서 막전극의 감응 특성을 증진시킨 방법이었다.

• Natural Product Sciences
• /
• 제21권1호
• /
• pp.20-24
• /
• 2015

Cyanidin-3-glucoside (C3G) and cyanidin-3-rutinoside (C3R) were isolated by high-performance countercurrent chromatography (HPCCC) using a two-phase solvent system composed of tert-butyl methyl ether/n-butanol/acetonitrile/water/trifluoroacetic acid (1 : 3 : 1 : 5 : 0.01, v/v) to give pure C3G (34.1 mg) and C3R (14.3 mg) from 1.5 g crude mulberry fruit extract. Using the pure C3G and C3R, a reliable high-performance liquid chromatography (HPLC) method was developed and validated to determine the C3G and C3R contents in mulberry fruit. C3G and C3R were separated simultaneously using an Eclipse XDB-C18 column ($4.6{\times}250mm$ I.D., $5{\mu}m$) coupled with a photodiode array detector (PDA). The gradient elution of the mobile phase consisting of acetonitrile (0.5% formic acid) and water (0.5% formic acid) was applied (1.0 mL/min), and the detection wavelength was 520 nm. The calibration curves of C3G and C3R showed good linearity (both with $r^2=0.9996$) in the concentration range $15.625-500{\mu}g/mL$, and the relative standard deviations (RSD%) of intra- and inter-day variability were in the ranges 2.1 - 8.2% and 4.1 - 17.1%, respectively. The accuracies were ranged 96.5 - 102.6% for C3G and C3R, respectively. The developed HPLC method was used to determine the contents of C3G and C3R in newly harvested mulberry from eight different provinces of Korea.

• Advances in aircraft and spacecraft science
• /
• 제5권1호
• /
• pp.21-49
• /
• 2018

In this paper, geometric nonlinear bending characteristics of single wall carbon nanotube reinforced composite (SWCNTRC) doubly curved shell panels subjected to uniform transversely loadings are investigated. The nonlinear mathematical model is developed for doubly curved SWCNTRC shell panel on the basis of higher-order shear deformation theory and Green- Lagrange nonlinearity. All nonlinear higher order terms are included in the mathematical model. The effective material properties of SWCNTRC are estimated by using Eshelby-Mori-Tanaka micromechanical approach. The governing equation of the shell panel is obtained using the total potential energy principle and a Newton-Raphson iterative method is employed to compute the nonlinear displacement and stresses. The present results are compared with published literature. The effect of SWCNT volume fraction, width-to-thickness ratio, radius-to-width ratio (R/a), boundary condition, linear and nonlinear deflection, stresses and different types of shell geometry on nonlinear bending response is investigated.

• Structural Engineering and Mechanics
• /
• 제13권1호
• /
• pp.53-74
• /
• 2002

Composites exhibit larger dispersion in their material properties compared to conventional materials due to larger number of parameters associated with their manufacturing processes. A $C^0$ finite element method has been used for arriving at an eigenvalue problem using higher order shear deformation theory for initial buckling of laminated composite plates. The material properties have been modeled as basic random variables. A mean-centered first order perturbation technique has been used to find the probabilistic characteristics of the buckling loads with different edge conditions. Results have been compared with Monte Carlo simulation, and those available in literature.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.109-112
• /
• 2007

In this paper we describe a robust method of improving precision in monitoring high energy ion implantation processes. Ion implant energy accuracy was measured in the device manufacturing process using an unpatterned implanted layer on an intrinsic p-type silicon wafer. To increase Rs sensitivity to energy at the well implant process, a PN junction structure was formed by P-well and deep N-well implants into the p-type Si wafer. It was observed that the depletion layer formed by the PN junction was very sensitive to energy variation of the well implant. Conclusively, it can be recommended to monitor well implant processes using the Rs measurement method described herein, i.e., a PN junction diode structure since it shows excellent Rs sensitivity to variation caused by energy difference at the well implant step.

• 한국물환경학회지
• /
• 제25권1호
• /
• pp.96-101
• /
• 2009

The aim of this research was to apply experimental design methodology to optimizetion the photolytic degradation of N-nitrosodimethylamine (NDMA). Reactions were mathematically described as a function of parameters such as pH, initial NDMA concentration, and UV intensity using the Box-Behnken method. The results showed that the responses of NDMA removal (%) in photolysis were significantly affected by the synergistic effect of linear term of pH, initial NDMA concentration and UV intensity. The application of Response Surfase Methodology (RSM) using the Box-Behnken method yielded the following regression equation, which is an empirical relationship between the removal (%) of NDMA and test variables in coded unit: Y = 50.929 + 16.073(UV) - 7.909(NDMA) - 27.432(pH) - 11.385(UV)(NDMA) - 7.363(UV)(pH) +13.811(NDMA)(pH). The model predictions agreed well with the experimentally observed result ($R_2(ad.)=89%$).

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2864-2872
• /
• 2023

The criticality problem in this study is studied with the recently investigated the Anlı-Güngör scattering function. The scattering function depends on the Legendre polynomials as the Mika scattering function, but it includes only one scattering parameter, t, and its orders. Both Mika and Anlı-Güngör scattering are the same for only linear anisotropic scattering. The difference appears for the quadratic scattering and further. The analytical calculations are performed with the H_N method, and the numerical results are calculated with Wolfram Mathematica. Interpolation technique in Mathematica is also used to approximate the isotropic scattering results when t parameter goes to zero. Thus, the calculated results could be compared with the literature data for isotropic scattering.

• Archives of Plastic Surgery
• /
• 제38권1호
• /
• pp.96-101
• /
• 2011

Purpose: In treatment of facial bone fracture, occurred in children, we generally use wires, miniplate, absorbable plate or their combination. These foreign bodies can be palpable, and sometimes may cause infections, and need reoperation for removing. When bone fragments are multiple, small or thin, they are hard to handle and make accurate reduction of all fragments. In these cases, a biodegradable tissue adhesive, Histoacryl$^{(R)}$ (n-butyl-2-cyanoacrylate), can be used as fixation technique for small, multiple, and thin fracture fragments. Methods: 3 years old and 6 years old children, who has comminuted fracture on frontal sinus, we used Histoacryl$^{(R)}$ for fixation of multiple bone fragments. After approaching by coronal incision, we pulled out all bone fragments and reconstructed bone fragments by Histoacryl$^{(R)}$ and fixed those on frontal sinus by absorbable plates. Results: Photographs and 3-dimensional CT obtained preoperatively and postoperatively. And we compared them each other in terms of accuracy of reconstructed bony contour. We could reconstruct almost all bone fragments easily along 3-dimensional structure and get excellent aesthetic results. There was no complication such as infection. Conclusion: In treatment of comminuted facial bone fracture, occurred in children, Histoacryl$^{(R)}$ is an excellent method for accurate reconstruction in small and thin bone fragments which cannot be fixed by wire, miniplate or absorbable plate without complication.