• Korean Journal of Crystallography
• /
• v.15 no.2
• /
• pp.99-103
• /
• 2004

The structure of $C_{16}H_{19}O_2N_3CuCl_2\;{\cdot}\;H_2O$ has been determined by X-ray diffraction methods. The crystal system is triclinic, space group Pl, unit cell constants. $a=7.6202(9)\; \AA,\; b=8.5943(7) \AA,\; c= 8.6272(6) \AA,\; \alpha= 67.518(6)^{\circ}.\; \beta= 68.043(8)^{\circ},\; \gamma=74.370(8)^{\circ},\; V=478.89(8)\; \AA^3,\; T=295K,\; Z=1,\; D_c=1.504Mgm^{-3}$The intensity data were collected on an Enraf-Nonius CAD-4 Diffractometer with graphite monochromated $MoK\alpha$ radiation $(\alpha=0.7107\;\AA)$. The molecular structure was solved by direct method.』 and refined by full-matrix least squares to a final $R=2.47\%$ for 1659 unique observed $F_0>4\sigma(F_0)$ reflections and 234 parameters.

• Economic and Environmental Geology
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2013

We proposed the revised full-pattern-fitting method of illite polytype quantification with background correction and scale factor correction of WILDFIRE(C) simulated pattern, and R% value ((${\sum}$|simulated-measured|/simulated)/ $n{\times}100$) calculation, and then verified the reliability of this method by applying for the test sample ($2M_1$:1M$$\frac{._-}{.}$$1:1), and by comparing the result with Grathoff and Moore method (1996). We confirmed that the proposed method showed the error range of less than 3.6%, which is much lower than the previous full-pattern-fitting methods, in spite of the impurities of the test sample. In the comparison with Grathoff and Moore method for 2 tested samples, we obtained the relatively higher $2M_1$ contents using Grathoff and Moore method, whereas we obtained the reliable results with less than 10% of R% values.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.5
• /
• pp.343-348
• /
• 2008

The bioequivalence of two cyclosporine A (CyA) 100 mg soft capsules (Chong Kun Dang's $Cipol-N^{(R)}$ as the test drug; Korea Novartis' Sandimmun $Neoral^{(R)}$ as the reference drug) was assessed in healthy male Korean volunteers after oral administration of 200 mg CyA according to a randomized crossover design. The whole blood samples were analyzed for the determination of parent CyA in the blood by using a validated HPLC/diode array detector method. The mean $AUC_t$ values for reference and test products were $4095.3{\pm}1397.2$ and $3958.3{\pm}1138.2\;ng{\cdot}hr/mL$, respectively. The mean $C_{max}$ values were $1135.9{\pm}293.2\;ng/mL$ for the reference product, and $985.0{\pm}207.9\;ng/mL$ for the test product. $T_{max}$ was $1.6{\pm}0.4\;hr$ for the reference and $1.8{\pm}0.5\;hr$ for the test product. The differences of $AUC_t$, $C_{max}$ and $T_{max}$ were -3.35, -13.28 and +10.63%, respectively. The point estimates and 90% confidence intervals for $AUC_t$ and $C_{max}$ were 0.981 (0.9171 to 1.0514) and 0.876 (0.8229 to 0.9336), respectively. Based on the pharmacokinetic and statistical data, we conclude that these two products are bioequivalent and can be considered interchangeable in the medical practice.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1254-1254
• /
• 2001

Near infrared spectroscopy (NIRS) was applied to determination of the lipid content of compost during compost fermentation of tofu(soybean-curd) refuse. The reflected rays in the wavelength range between 800 and 2500 nm were measured at 2 nm intervals. The absorption of lipid observed at 4 wavelengths, 1208, 1712, 2312 and 2352 nm on the second derivative spectra. To formulate a calibration equation, a multiple linear regression analysis was carried out between the near-infrared spectral data and on the lipid content in the calibration sample set (sample number, n=60) obtained using a Soxhlet extraction method. The calibration equation for prediction of lipid, the value of the multiple correlation coefficient (R) was 0.975 when using the wavelengths of 1208 and 1712nm. To validate the calibration equation obtained, the lipid content in the validation sample set (n=35) not used for formulating the calibration equation were calculated using the calibration equations, and compared with the values obtained using the Soxhlet extraction method. Good agreement were observed between the results of the Soxhlet extraction method and those values of the NIRS method. The simple correlation coefficient (r) and standard error of prediction (SEP) were 0.964 and 0.815 %, respectively. Then, the NIRS method was applied to a compost fermentation in which the time course the lipid content were measured and good results were obtained. The study indicates that NIRS is a useful method for process management of the compost fermentation of tofu refuse.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.3
• /
• pp.198-207
• /
• 1990

Among the biodegradable liquid waste treatment and disposal methods, ocean dumping is a cost-effective and productive manner considering reuse point of view However, when biodegradable liquid waste is dumped in the ocean, oxygen consumption by the decomposition of organic matter must be considered. The purpose of this study is to determine the maximum allowable concentration and dumping rate in the southern waters of the East Sea based on dissolved oxygen level. Streeter and Phelps' model has been used to determine the maximum allowable concentration. Factors in this model, deoxygenation constants and reaeration coefficients, have been determined by appling oxygen consumption method and closed system model. Deoxygenation constants and reaeration coefficients from surface to each standard depth are $0.24\~0.29/day\;and\;0.03\~0.39/day$ in summer, $0.17\~0.20/day\;and\;0.04\~0.56/day$ in winter, respectively. The allowable organic matter concentration($mgBOD/\iota$) to the dissolved oxy-gen sag value of $5mg/{\iota}$ is represented $17.23\times(H)^{-0.37}$ in summer, and $64.96\times(H)^{-0.52}$ in winter by mixing depth(H, m). Csanady's experiment has been applied to estimate the optimum dumping rate. The optimum dumping rate($R,\;m^3/sec$) can be written as a product of the beam(b, m) and the draft(h, m) of vessel, and biochemical oxygen demand of waste($L_n,\;mg/{\iota}$) $R=275{\times}bh^{0.63}L_n^{-1}$ in summer $=745{\times}bh^{0.48}L_n^{-1}$ in winter. The difference of dumping rate between in summer and winter is due to the oxygen distribution.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.5
• /
• pp.429-435
• /
• 2016

Cold stretching(CS) pressure vessels from ASS304 (austenitic stainless steel 304) are used for the transportation and storage of liquefied natural gas(LNG). CS pressure vessels are manufactured by pressurizing the finished vessels to a specific pressure to produce the required stress ${\sigma}_k$. After CS, there is some degree of plastic deformation. Therefore, CS vessels have a higher strength and lighter weight compared to conventional vessels. In this study, we investigate the tensile and fatigue behavior of ASS304 sampled by CS pressure vessels in accordance with the ASME code at cryogenic temperature. From the fatigue test results, we show S-N curves using a statistical method recommended by JSEM-S002. We carried out the fractography of fractured specimens using scanning electron microscopy (SEM).

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.2 s.15
• /
• pp.47-49
• /
• 2006

Various methods of making thin film is being used in semiconductor manufacturing process. The most common method in this field includes CVD(Chemical Vapor Deposition) and PVD(Physical Vapor Deposition). Thin film is deposited on both the backside and the frontside of wafers. The thin film deposited on the backside has poor thickness profile, and can contaminate wafers in the following processes. If wafers with the thin film remaining on the backside are immersed in batch type process tank, the thin film fall apart from the backside and contaminate the nearest wafer. Thus, it is necessary to etch the backside of the wafer selectively without etching the frontside, and chemical injection nozzle positioned under the wafer can perform the backside etching. In this study, the backside chemical injection nozzle with optimized chemical injection profile is built for single wafer tool. The evaluation of this nozzle, performed on $Si_3N_4$ layer deposited on the backside of the wafer, shows the etching rate uniformity of less than 5% at the etching rate of more than $1000{\AA}$.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.10
• /
• pp.1-6
• /
• 1998

The dielectric effects of plastic packages on GaAs($\varepsilon$$_{r}$=13) MMIC microstrip characteristics are analyzed using the spectral domain method (SDM). As being packaged by typical FR-4 composites ($\varepsilon$$_{r}$=14.2) for PCB substrates and plastic packages, the characteristic impedance is reduced by about 6 %, but the effective dielectric constant is increased by 13 % from those of bare microstrip, respectively. The parasitic effects of the packaging materials can greatly degrade the performance of the packaged MMIC. We also calculated the optimum microstrip width, which maintains the 50 $\Omega$ matching condition after plastic packaging. These calculated results can be used to optimize the plastic packages, and extend the application ranges for low cost MMIC production.n.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.52-52
• /
• 2003

For the evaluation of hormonal control of spermiation in fish, a method to quanify the spermiation response or mature Rhynchocypris oxycephalus (Sauvage and Dabry) to hormonal therapy is described. Spermatocrit was determined after 7 min centrifugation at 18,000 $\times$ｇ and sperm density was estimated by a standard hemocytormer method. Sperm density can be predicted from spermatocrit since their relationship is linear as described by the regression equation, Y=3.68X-27,18 ($R^2$=0.82, N=50), where Y is spermatocrit and X is sperm density. Milt production by mature R. oxycephalus was highest at 24 h after injection of 1,000 IU human chorionic gonadotropin (HCG) and 50 $\mu\textrm{g}$ luteinizing hormone-releasing hormone analogue (LHRHa) per kg body weight. Increased milt production coincided with low spermotocrit and sperm density levels. These results demonstrate that spermition in mature R. oxycephalus can be reliably evaluated by a spermatocrit method and that HCG and LHRHa are effecove in stimulating of spermiation in this species.

• Journal of the Korean Ceramic Society
• /
• v.33 no.5
• /
• pp.602-615
• /
• 1996

The purpose of the present study is to investigate the microstructural effect on the R-curve behavior in three aluminas with different grain size distributions by analyzing the bridging stress distribution. The crack opening displacement (COD) according to the distance behind the stationary crack tip was measured using an in situ SEM fracture method. The measured COD values in the fine-grained alumina agreed well with Wiederhorn's sollution while they deviated from Wiederhorn's solution in the two coarse-grained aluminas because of the increase of the crack closure due to the grain interface bridging in the crack wake. A numerical fitting procedure was conducted by the introduction of the power-law relation and the current theoretical model together with the measured COD's in order to obtain the bridging stress distribution. The results indicated that the bridging stress function and the R-curve computed by the current model were consistent with those computed by the power-law relation providing a reliable evidence for the bridging stress analysis of the current model. The strain-softening exponent in the power-law relation n, was calculated to be in the range from 2 to 3 and was closely related to the grain size distribution. Thus it was concluded from the current theoretical model that the grain size distribution affected greatly the bridging stress distribution thereby resulting in the quantitative analysis of microfracture of polycrystalline aluminas through correlating the local-fracture-cont-rolling microstructure.