• Membrane Journal
• /
• v.25 no.2
• /
• pp.115-122
• /
• 2015

$SiO_2{\cdot}B_2O_3$ was prepared by trimethylborate (TMB)/tetraethylorthosilicate (TEOS) mole ratio 0.01 at $800^{\circ}C$. PDMS[poly(dimethysiloxane)]-$SiO_2{\cdot}B_2O_3$ composite membranes were prepared by adding porous $SiO_2{\cdot}B_2O_3$ to PDMS. To investigate the characteristics of PDMS-$SiO_2{\cdot}B_2O_3$ composite membrane, we observed PDMS-$SiO_2{\cdot}B_2O_3$ composite membrane using TG-DTA, FT-IR, BET, X-ray, and SEM. PDMS-$SiO_2{\cdot}B_2O_3$ composite membrane was studied on the permeabilities of $H_2$ and $N_2$ and the selectivity ($H_2/N_2$). Following the results of TG-DTA, BET, X-ray, FT-IR, $SiO_2{\cdot}B_2O_3$ was the amorphous porous $SiO_2{\cdot}B_2O_3$ with $247.6868m^2/g$ surface area and $37.7821{\AA}$ the mean of pore diameter. According to the TGA measurements, the thermal stability of PDMS-$SiO_2{\cdot}B_2O_3$ composite membrane was enhanced by inserting $SiO_2{\cdot}B_2O_3$. SEM observation showed that the size of dispersed $SiO_2{\cdot}B_2O_3$ in the PDMS-$SiO_2{\cdot}B_2O_3$ composite membrane was about $1{\mu}m$. The increasing of $SiO_2{\cdot}B_2O_3$ content in PDMS leaded the following results in the gas permeation experiment: the permeability of both $H_2$ and $N_2$ was increased, and the permeability of $H_2$ was higher than $N_2$, but the selectivity($H_2/N_2$) was decreased.

• Journal of the Korean Applied Science and Technology
• /
• v.11 no.1
• /
• pp.71-77
• /
• 1994

In order to review industrial application of amphoteric surfactants, new types of hydroxy sulfobetaine, 3-(N, N-dimethyl N-dimethyl-N-alkylammonio)-2-hydroxy-1-propane sulfonate and 3-(N, N-dimethyl N-acylammonio)-2-hydroxy-1-propane sulfonate were prepared by the reaction of quaternized sodium 1-chloro-2-hydroxy-3-propane sulfonate with N, N-dimethyl-N-alkylamine and N, N-dimethyl N-acylamido propylamine that have a straight chain radical of 12, 18 carbon atoms respectively in the presence of alkali catalyst. All the reaction products could be separated by means of column and thin layer chromatography, and the yields of all products ranged in $85{\sim}90%$, the structure of them could be confirmed from IR and $^{1}H$-NMR spectra.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.3
• /
• pp.203-214
• /
• 2013

This study investigates quantitative methods for assessment of infrared analysis of concrete admixtures using correlation coefficients by performing IR scans following the ASTM C494/C494M-11 specifications. In order to achieve this goal, numerous IR scans were performed on specimens supplied by the manufacturer from different batches to ensure uniformity and equivalency. These scans were then analyzed to create correlation coefficients for each admixture. The correlation coefficients were used to quantitatively evaluate and interpret IR Scans of job samples. The study focused on 23 most commonly used concrete admixtures by the New Jersey Department of Transportation (NJDOT). They include air-entrainers, accelerators, retarders, water reducers, and other combinations of these admixtures. Their correlation coefficients were established by analyzing a total of 12 scans of each admixture from three different batches supplied by the manufacturer at different time intervals. In order to validate the obtained correlation coefficients and establish a target correlation, job samples were tested and compared to the obtained correlations. The study also evaluated the effects of drying time and using different types of KBr on correlation coefficients.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.1
• /
• pp.46-50
• /
• 2002

C-SiC films with different content of SiC on stainless steel substrate were prepared with ion beam mixing. It was found that hydrogen concentrations in C-SiC coatings was higher than that in stainless steel after H$\^$+/ ion implantation followed by thermal annealing. Infrared (IR) transmission measurement was used to study the mechanism of hydrogen retention by C-SiC films. The vibrational features in the range between 400 and 3200 cm$\^$-1/ in IR transmission spectra show the Si-CH$_3$, Si-CH$_2$, Si-H, CH$_2$and CH$_3$bonds, which are responsible for retaining hydrogen.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.334-345
• /
• 2008

컴퓨터의 발달과 더불어 현대사회는 기록하고 보존해야할 정보의 양이 점점 방대해 지고 있다. 그로 인해 자기기록매체처럼 정보를 사용자의 편의에 따라 반복적으로 기록하고 재생할 수 있는 광기록매체에 대한 관심이 증가되고 있다. $Ge_2Sb_2Te_5$(GST)는 기존의 CD-RW나 Floppy Disk(FD)를 대체할 차세대 기록매체로 주목받고 있다. 따라서 본 연구에서는 비정질상과 결정상으로 변하는 성질을 가지고 있는 GST롤 상변화 기록매체로서 이용하기 위해 굴절률을 평가하였다. 시료는 5N의 순도를 갖는 Ge, Sb, Te 물질을 준비하고 조성비에 맞추어서 석영관에 진공 봉입한 후 용융-냉각법으로 벌크를 제작하였고 열증착 방법으로 Si 및 유리 기판위에 1000nm 두께로 박막을 제작하였다. UV-Vis-IR spectrophotometer를 사용하여 반사도와 투과도를 측정하였고 측정한 스펙트럼을 이용하여 Swanepoel method로 굴절률을 계산하였다. 본 연구진이 자체 개발한 계산툴에 실험값을 대입하였고 실험에 의해 얻은 투과도와 계산툴에 의해 얻은 투과도 스펙트럼을 비교하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.381.1-381.1
• /
• 2014

In this study, we investigated the deposition behavior and the etch resistivity of plasma polymerized carbon hardmask (ppCHM) film with the variation of process temperature. The etch resistivity of deposited ppCHM film was analyzed by thickness measurement before and after direct contact reactive ion etching process. The physical and chemical properties of films were characterized on the Fourier transform infrared (FT-IR) spectroscope, Raman spectroscope, stress gauge, and ellipsometry. The deposition behavior of ppCHM process with the variation of temperature was correlated refractive index (n), extinction coefficient (k), intrinsic stress (MPa), and deposition rate (A/s) with the hydrocarbon concentration, graphite (G) and disordered (D) peak by analyzing the Raman and FT-IR spectrum. From this experiment we knew an optimal deposition condition for structure of carbon hardmask with the higher etch selectivity to oxide. It was shown the density of ppCHM film had 1.6~1.9 g/cm3 and its refractive index was 1.8~1.9 at process temperature, $300{\sim}600^{\circ}C$. The etch selectivity of ppCHM film was shown about 1:4~1:8 to undoped siliconoxide (USG) film (etch rate, 1300 A/min).

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.5
• /
• pp.611-618
• /
• 1999

An efficient and effective access to needed information becomes an important factor in the modern information society. Many people have developed information retrieval (IR) systems that retrieve needed information from a large amount of data at a given time. However, most freely available IR systems have been developed for English text rather than for Korean text. In this research, we have analyzed the IR system freeWAIS-sf, and localized it with the Korean morphological analyzer, namely HAM. The localized freeWAIS-sf can handle both English text and Korean text simultaneously. We have also modified the weighting scheme of freeWAIS-sf. The experimental result shows that the modified weighting scheme outperforms the original one in terms of retrieval effectiveness.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.43-48
• /
• 2010

Polyamide derived from azo compound of o-amino phenol coupled with acetyl acetone, maleic anhydride acid and p-phenylene diamine were prepared. The prepared polyamide (PA) was refluxed with metal salts of transition metal ions include, $Co^{+2},\;Cr^{+2},\;Ni^{+2},\;Cu^{+2},\;Zn^{+2},\;Cd^{+2}$ and $Fe^{+3}$ in dimethyl formamide (DMF) in different molar ratios. These complexes were characterized and identified by elemental and thermal analysis, IR, 1H NMR spectra. The data showed that PA ligand coordinates with metal ions in abidentate manner through donating N=N and O-H groups. The metal ions are surrounded by coordinated water molecules and anions to establish the geometrical structure of the complexes. The thermal analysis degradation at different temperatures explained the weight loss of hydrated water and the decompositions of complexes until a constant weight loss of metal oxides is obtained.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.2
• /
• pp.83-91
• /
• 2011

Mesoporous titanium dioxide ($TiO_2$) thin films were prepared using poly(vinyl chloride)-graft-poly(N-vinyl pyrrolidone) (PVC-g-PVP) as a templating agent via sol-gel process. Grafting of PVC chains from PVC backbone was done by atom transfer radical polymerization (ATRP) technique. The successful grafting of PVP to synthesize PVC-g-PVP was checked by fourier-transform infrared spectroscopy (FT-IR) and gel permeation chromatography (GPC). The carbonyl group interaction of PVC-g-PVP graft copolymer with $TiO_2$ was confirmed by FT-IR. The porous morphologies of the $TiO_2$ films genereated after calcination at $450^{\circ}C$ was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The mesoporous $TiO_2$ films with 580 nm in thickness were used as a photoelectrode for solid state dye sensitized solar cell (DSSC) and showed an energy conversion efficiency of 1.05% at 100 $mW/cm^2$.

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.453-458
• /
• 2000

The permeability of oxygen and nitrogen was investigated from the polymeric LB films containing imidazole-metal ion complexes and compared with its corresponding cast films on porous membrane filters. The amphiphilic polymer, poly(N- (2-(4-imidazolyl)ethyl)-maleimide-alt-1-octadecene) (IM-O), was synthesized by reaction of poly(maleic anhydride-alt-1-octadecene) with histamine. The IM-O nonolayer showed high stability on Fe (III) ion-containing subphase. The molecular structure in the LB films was investigated by means of FT-IR spectroscopy. The metal ion concentration incorporated into the LB films was determined by means of XPS measurements. The mechanical stability and uniformity of the LB films on porous substrates were indirectly evidenced by SEM observation. The LB and cast films showed more or less higher selectivity toward nitrogen, and high permeability was found to both the oxygen and nitrogen.