• 한국기계가공학회지
• /
• 제5권1호
• /
• pp.51-58
• /
• 2006

The objective of this research work is to investigate into heat transfer characteristics of the laser cutting of CSP 1N sheet using high power CW Nd:YAG laser. In order to investigate the heat transfer characteristics, three dimensional quasi stationary and steady-state heat transfer analysis has been carried out. The laser heat source is assumed as a volumetric heat source with a gaussian heat distribution in a plane. Through the comparison of the results of analyses with those of experiments, the proper finite element model has been obtained. In addition, characteristics of the three-dimensional heat transfer and temperature distribution have been estimated by the finite element model. Finally, the minimum temperature at the center for cutting of the material has been estimated.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권10호
• /
• pp.510-514
• /
• 2004

In this paper, we analytically examine the voltage transfer function dependent on input conditions for an N-Input NAND Gate. The logic threshold voltage, defined as a voltage at which the input and the output voltage become equal, changes as the input condition changes for a static NAND Gate. The logic threshold voltage has the highest value when all the N-inputs undergo transitions and it has the lowest value when only the last input connected to the last NMOS to ground, makes a transition. This logic threshold voltage difference increases as the number of inputs increases. Therefore, in order to provide a near symmetric voltage transfer function, a multistage N-Input Gate consisting of 2-Input Logic Gates is desirable over a conventional N-Input Gate.

• ETRI Journal
• /
• 제27권5호
• /
• pp.647-650
• /
• 2005

A new configuration to realize the most general n-th order voltage transfer function is proposed. It employs only one operational transresistance amplifier (OTRA) as the active element. In the synthesis of the transfer function, the RC:-RC decomposition technique is used. To the best of author's knowledge, this is the first topology to be used in the realization of n-th order transfer function employing single OTRA.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.22-25
• /
• 2005

In this research, a wafar-level transfer method of cantilever array on a conventional CMOS circuit has been developed for high density probe-based data storage. The transferred cantilevers were silicon nitride ($Si_3N_4$) cantilevers integrated with poly silicon heaters and piezoelectric sensors, called thermo-piezoelectric $Si_3N_4$ cantilevers. In this process, we did not use a SOI wafer but a conventional p-type wafer for the fabrication of the thermo-piezoelectric $Si_3N_4$ cantilever arrays. Furthermore, we have developed a very simple transfer process, requiring only one step of cantilever transfer process for the integration of the CMOS wafer and cantilevers. Using this process, we have fabricated a single thermo-piezoelectric $Si_3N_4$ cantilever, and recorded 65nm data bits on a PMMA film and confirmed a charge signal at 5nm of cantilever deflection. And we have successfully applied this method to transfer 34 by 34 thermo-piezoelectric $Si_3N_4$ cantilever arrays on a CMOS wafer. We obtained reading signals from one of the cantilevers.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제6권
• /
• pp.113-123
• /
• 1998

The present study is to investigate the effect of experimental parameters on the heat transfer characteristics of a spherical capsule storage system using paraffins. N-Tetradecane and mixture of n-Tetradecane 40% and n-Hexadecane 60% were used as paraffins. Water with inorganic material was also tested for the comparison. The experimental parameters were varied for the Reynolds number from 8 to 16 and for the inlet temperature from -7 to 2$^{\circ}C$. Measured local temperatures of spherical capsules in the storage tank were utilized to calculate charging and discharging times, dimensionless thermal storage amount, and the average heat transfer coefficients in the tank. Local charging and discharging times in the storage tank were significantly different. The effect of inlet temperature on charging time was larger than that on discharging time, but the effect of Reynolds number on charging time was smaller than that on discharging time. Charging time of paraffins was faster by 11~72% than that of water with inorganic material, but little difference of discharging time was found among them. The effect of Reynolds number on the dimensionless thermal storage was less during charging process and more during discharging process than the effect of inlet temperature. The effect of the inlet temperature and the Reynolds number on the average heat transfer coefficient of the storage tank was stronger during discharging process than during charging process. The average heat transfer coefficients of the spherical capsule system using paraffins were larger by 40% than those using water.

• 청정기술
• /
• 제22권1호
• /
• pp.45-52
• /
• 2016

This study reports on the modeling and simulation of heat transfer in packaging boxes used for vaccine shipping. Both water and n-tetradecane are used as primary insulation materials inside a multi-slab system. The one-dimensional model, which is a spherical model using a radius equivalent to the rectangular geometry of container, is applied in this study. N-tetradecane with low thermal diffusivity and proper phase transition temperature exhibits higher heat transfer resistance during both heating and cooling processes compared to water. Thus, n-tetradecane is a better candidate as an insulating material for packaging containers for vaccine shipping. Furthermore, the developed method can also become a rapid and economic tool for screening appropriate phase change materials used as insulation materials with suitable properties in logistics applications.

• 한국인터넷방송통신학회논문지
• /
• 제13권2호
• /
• pp.15-23
• /
• 2013

본 논문에서는 N-스크린 환경에서 세션 이관 및 분리을 통해 사용자의 이종의 단말 간 유동적으로 컨테츠를 이동하고, 서비스 단말을 변경 할 수 세션 제어 구조와 방안을 제안한다. N-스크린 서비스에서는 사용자가 스크린 해상도, CPU 능력, 액세스망 인터페이스 등이 다른 복수의 단말을 사용할 수 있다. 또한, 사용자가 서비스 사용 중 단말을 변경하거나, 한 명의 사용자가 다중 스트림(One User Multi Stream)을 사용할 수 있어야 하므로, 이종의 다중 단말 간 컨텐츠를 이동시키거나 서비스 단말을 변경할 수 있는 등의 N-스크린 서비스를 위한 구조와 서비스 방안이 필요하다. 본 논문에서는, N-스크린 환경에서 세션 분리 및 이관 등을 제어할 수 있는 세션 관리 및 제어를 위한 노드들을 제안하고, 이 노드들과 사용자들 간의 인터랙션을 통해 이종의 다중 단말간 유동적인 컨텐츠 이동과 서비스 단말 변경이 가능한 N-스크린 환경에 적합한 세션 제어 구조를 제안한다. 제안된 방안은 단말 사양에 맞추어 세션 이관의 지연을 최소화하고 또한 서버의 부하를 최소화하도록 한다. 시뮬레이션의 결과를 통해, 제안하는 구조를 와 방안에 대한 효율성 및 성능을 분석하였다.

• 한국유기농업학회지
• /
• 제21권3호
• /
• pp.381-389
• /
• 2013

본 연구는 보리와 완두 혼파 포장에서 유기질소질 비료의 시용 수준이 건물생산성, 질소 고정 그리고 이동율 및 이동량을 측정하기 위하여 실시하였다. 처리는 유기질소 40kg, 80kg, 그리고 120kg/ha의 3처리와 질소고정 측정을 위해 대조구로 보리단파구를 각 처리마다 배치하였다. 난괴법 3처리 3반복으로 처리하여 3월부터 6월까지 재배하였다. 보리는 40kg/ha와 완두 80kg/ha를 파종 후 발아를 촉진하기 위하여 흑색 비닐을 멀칭하였다. 질소 고정을 측정하기 위하여 99.8원자% $15N(NH_4)_2SO_4$를 4월 15일 ha당 1kg 수준으로 증류수에 혼합하여 $30{\times}20cm$ 쿼드랏에 시용 하였다. 공중질소 고정율은 32.4%에서 0% 사이였다. 보리에서 완두에로의 질소 이동률은 차이법에서 47.6%에서 21.8% 사이 그리고 동위원소 희석액 처리법에서 24.6%와 21.4%를 나타냈다. 이동량은 차이법에서 92.8kg/ha에서 41.9kg/ha 및 49.7kg 반면 120kg N 유기질 시용구는 동위원소희석법에서는 질소이동이 일어나지 않은 것으로 나타났다. 결론적으로 유기질 비료의 증가에 따른 두과작물의 공중질소고정 향상, 화본과 작물로의 질소이동효과가 분명하지 않았다.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.752-755
• /
• 2008

메조포러스 SBA-15 silica와 (1R,2R)-N-(trimethoxysilylpropyl-N-sulfonyl)-1,2-cyclohaxanediamine 또는 (1R,2R)-N-(trimethoxysilylpropyl-N-sulfonyl)-1,2-diphenylethylenediamine과의반응을통하여 메조포러스 silica SBA-15-supported TsCHDA와 TsDPEN가 각각 제조되어졌다. SBA-15-supported TsCHDA로부터 얻어진 ruthenium complex들은 microwave하에서의 케톤의 비대칭 수소 전달반응에서 우수한 촉매능과 만족할 만한 거울상 입체선택도를 주었다. 이불균일상 SBA-15-supported ruthenium 촉매는 사용이 용이하게 안정할 뿐 만 아니라, 재사용 할 수 있었다. 비대칭 수소전달반응을 위한 microwave를 사용한 효율적인 공정이 개발되었다.

• 한국유기농업학회지
• /
• 제19권spc호
• /
• pp.161-164
• /
• 2011

Nitrogen fixation by legumes can be valuable sources for organic farming. This study was to investigate the effect of different legume mixtures on nitrogen fixation and transfer to grasses on spring paddy field. Three different mixtures were used (rye+hairy vetch, Italian ryegrass+crimson clover, oat+pea) in a randomized complete block design with three replications and sowed in pots with different sowing rate (5:5 rye:hairy vetch,7:3=Italian:crimson, 6:4=oat:pea) on early March. $(^{15}NH_4)SO_4$ solution at. 99.8 atom%$^{15}N$ was applied to the each pot at the rate of 2kg N $ha^{-1}$ on $16^{th}$ April. Forage were harvested at ground level in heading stage and separated into legume and grass. Total N content and $^{15}N$ value were determined using a continuous flow stable isotope ratio mass spectrometry. DM yield of rye+vetch, Italian+crimson and oat+pea were 6,607, 3,213 and 4,312kg/ha, respectively. Proportion of N from fixation was 0.73(rye+vetch), 0.42(Italian+crimson) and 0.93(oat+pea). The percentages of N transfer from legume to grass were from 61% to 24% in different method by treatments and -35% to 21% in isotope dilution method.