• 한국자기공명학회논문지
• /
• 제23권4호
• /
• pp.104-107
• /
• 2019

Many proteins are expressed as an insoluble form during the production using Escherichia coli (E. coli) system. Although various methods are applied to increase their amounts of soluble expression, refolding is the only feasible way to obtain a target protein in some cases. Moreover, protein NMR experiments require ¹³C/¹⁵N-labeled proteins that can only be obtained from E. coli systems in terms of cost and technical difficulty. The finding of appropriate refolding conditions for a target protein is a time-consuming process. In particular, it is very difficult to determine whether the refolded protein has a native structure, when a target protein has no enzymatic activity and its refolding yield is very low. Here, we showed that 1-dimensional ¹H-¹⁵N heteronuclear single quantum correlation (1D ¹H-¹⁵N HSQC) experiment can be efficiently used to screen an optimal condition for the refolding of a target protein by monitoring both the structure and concentration of the refolded protein.

• Current Photovoltaic Research
• /
• 제7권1호
• /
• pp.15-20
• /
• 2019

Most high-efficiency n-type silicon solar cells are based on the high quality surface passivation and ohmic contact between the emitter and the metal. Currently, various metalization methods such as screen printing using metal paste and physical vapor deposition are being used in forming electrodes of n-type silicon solar cell. In this paper, we analyzed the degradation factors induced by the front electrode formation process using e-beam evaporation of double passivation structure of p-type emitter and $Al_2O_3/SiN_x$ for high efficiency solar cell using n-type bulk silicon. In order to confirm the cause of the degradation, the passivation characteristics of each electrode region were determined through a quasi-steady-state photo-conductance (QSSPC).

• 한국컴퓨터정보학회논문지
• /
• 제6권2호
• /
• pp.157-162
• /
• 2001

본 연구에서는 인터넷 쇼핑몰의 사용편의성에 중점을 두어 인터넷 쇼핑몰의 인터페이스 설계요소인 화면설계와 구조설계 차원에서 수행도 평가와 주관적인 만족도를 실시하였다. 화면설계는 인터넷 쇼핑몰의 상품구조인 대분류, 중분류로 구분되는 메뉴리스트를 선정하였다. 대분류는 위치 요소 3수준(Left, Right, Center), 중분류는 배열형태 2수준(Horizontal, Vertical)으로 분류하였다. 구조설계에서는 상품구매과정을 구성하는 상품검색, 장바구니, 회원확인, 주문처리 등의 4요소의 페이지 흐름방식에 따라 3수준을 선택하였다. 수행도 분석 결과, 화면설계 평가에서는 대분류의 위치가 왼쪽, 중분류에서는 세로배열형태에서 탐색 시간이 적게 소요되었다. 그리고 이러한 두 요소에 대한 주관적 평가에서도 만족도가 높게 나타나 수행도 분석결과를 뒷받침하였다. 구조설계에서는 상품검색과 장바구니 절차 후에 회원확인과 주문처리가 한 화면에서 이루어지는 형태가 구매 절차에 대한 이해용이성 및 편리성에서 만족도가 가장 높게 나타났으며, 상품 검색 후 장바구니, 그 다음으로 회원확인과정을 거친 후 그 다음 화면에서 주문처리과정이 이루어지는 형태가 실물세계와의 유사성에서 만족도가 가장 높게 나타났다.

• Progress in Superconductivity
• /
• 제6권2호
• /
• pp.129-132
• /
• 2005

The formation behavior of $YBa_2Cu_3O_{7-x}$(Y123) and CuO phases in the heat-treated Cu-sheathed YBCO thick films was studied. The thick films were prepared by screen-printing method using $BaCO_3$ and Y211 powders on Cu tapes. The screen-printed thick films were placed at the center of the tube furnace, heated to $930^{\circ}C$ in air atmosphere and then maintained at the temperature for 60 sec - 300 sec. The microstructure and phases formed in the thick films were investigated by using optical microscope, X-ray diffraction (XRD) and SEM image analysis. During the heat treatment, partial melting occurred rapidly in the printed layers by peritectic reaction between CuO and precursor powders, and then YBCO superconducting phases nucleated from the Cu tapes and grew in a form of thick films.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2621-2627
• /
• 2023

In Experimental Advanced Superconducting Tokamak (EAST) experiments, to achieve long pulse and high-power ICRH system operation, a new kind of ICRH antenna has been designed. One of the most critical factors in limiting the operation of long pulse and high power is the intense heat load in the front face of the ICRH antenna, especially the Faraday Screen (FS). Therefore, the cooling channels of FS need to be designed. According to thermal-hydraulic analysis, the FS tubes are divided into several groups to achieve more excellent water cooling capability. The number of series and parallel tubes in one group is chosen as six. This antenna went into service in the spring of 2021, and it is delightful that the temperature distribution of the FS tube is below 400 ℃ in 14.5 s and 1.8 MW ICRH system operation. However, the active water-cooling design was not carried out on the upper and lower plates of FS, which led to severe ablations on that region under long pulse and high power operation, and the temperature is up to 800. Therefore, the upper and lower side plates of the FS were designed with water cooling based on thermal-hydraulic analysis. During the 2022 winter experiments, the temperature of ICRH antenna FS was lower than 400 in the pulse of 200s and the power of 1 MW operation.

• 한국수산과학회지
• /
• 제32권4호
• /
• pp.501-506
• /
• 1999

육상수조식 양식장의 사육환경을 개선하기 위하여 청소를 하지 않은 상태에서 5개월 동안 유입수에 필터 (망목, 60$\mu$m) 및 자외선등 (조사량, 0.5 $mWS/cm^2$)을 설치$\cdot$운행하면서 수온, 염분, DO, 영양염류 ($NO_3-N,\;NO_2-N,\;NH_4-\;PO_4-P$), 부유물질, 탁도, 세균수 및 비브리오균수의 변화를 검토하였다. 본 시스템의 설치 운행에 따라 5개월 후의 사육수의 수온, 염분, pH, DO, 세균수 및 비비리오균수의 정화효과는 관찰되지 않았다. 그러나, 사육수의 부유물질 및 탁도는 필터를 설치하지 않은 실험구에서 실험종료시 각각 39.7$\~$41.2mg/$\ell$, 23$\~$24 FAU까지 상승하였으나, 필터를 설치한 실험구 에서 각각 21.6$\~$22.3mg/$\ell$, 16$\~$17 FAU가 증가하여 5개월 후 필터의 설치$\cdot$운행에 의해 각각 $43.8\~45.6\%$ (평균, $44,7\%$), $29.2\~33.2\%$ (평균, $31,3\%$)가 제거되었다. $NO_3-N,\;NO_2-N,\;NH_4-N$ 및 $PO_4-P$는 필터를 설치하지 않은 실험구에서 5개월 후 각각 7.95$\~$8.01, 2.98$\~$3.01, 3.87$\~$3.92, 2.35$\~$2,42$\mu$g-at/$\ell$까지 증가하였으나, 필터를 설치한 실험구에서는 각각 6.21$\~$6.30, 2.23$\~$2.30, 3.18$\~$3.23, 1.87$\~$1,96 $\mu$g-at/$\iota$까지 증가하여 필터의 설치에 의해 각각 $21.3\~21.9\%$ (평균,$21.6\%$), $24.1\~25.2\%$ (평균, $24.7\%$), $17.6\~17.8\%$ (평균, $17.7\%$) 및 $19.0\~20.4\%$ (평균, $19.7\%$)의 제거 효과를 보았다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권4호
• /
• pp.210-218
• /
• 2000

For the fabrication of $YBa_2Cu_3O_x$ thick film, a substrate of $Y_2BaCuO_5$ was fabricated by adding $CeO_2$ into $Y_2BaCuO_5$ and two types of doping materials added with binder material were prepared. Each doping material was patterned on $Y_2BaCuO_5$substrate by the screen printing method and then was annealed at the temperature with a few step. It could be observed by X-ray diffraction patterns and SEM photographs that through the diffusion process of the $Y_2BaCuO_5$ and each doping material, the $YBa_2Cu_3O_x$ phase was formed. And with n additive of $CeO_2$ the thickness of formed $YBa_2Cu_3O_x$decreased. From the experiment of current limiting on thick film, the sample with thiner thickness of $YBa_2Cu_3O_x$ showed the more effective characteristics of current limiting.

• Journal of Electrochemical Science and Technology
• /
• 제11권3호
• /
• pp.310-317
• /
• 2020

A development of disposable strip-type galactose sensor for point-of-care testing (POCT) was studied, which was constructed using screen-printed carbon electrodes. Galactose levels were determined by the redox reaction of galactose oxidase in the presence of potassium ferricyanide as an electron transfer mediator in a small sample volume (i.e., less than 1 µL). The optimal performance of biosensor was systematically designated by varying applied potential, operating pH, mediator concentration, and amount of enzyme on the electrode. The sensor system was identified as a highly active for the galactose measurement in terms of the sensitivity (slope = 4.76 ± 0.05 nA/µM) with high sensor-to-sensor reproducibility, the linearity (R² = 0.9915 in galactose concentration range from 0 to 400 µM), and response time (t_95% = <17 s). A lower applied potential (i.e., 0.25 V vs. Ag/AgCl) allowed to minimize interference from readily oxidizable metabolites such as ascorbic acid, acetaminophen, uric acid, and acetoacetic acid. The proposed galactose sensor represents a promising system with advantage for use in POCT.

• Molecules and Cells
• /
• 제23권2호
• /
• pp.170-174
• /
• 2007

High-throughput subcellular imaging is a powerful tool for investigating the function of genes. In order to identify novel regulators of apoptosis we transiently transfected HeLa cells with 938 hypothetical genes of unknown function, and captured their nuclear images with an automated fluorescence microscope. We selected genes that induced greater than 3-fold increase in the percentage of apoptotic nuclei compared with vector-transfected cells. The full-length genes C10orf61, MGC 26717, and FLJ13855 were identified as candidate proapoptotic genes, and their apoptotic effects were confirmed by DNA fragmentation ELISAs and Western blotting for caspase-7 and PARP. We conclude that a subcellular image-based apoptotic screen is useful for identifying genes with proapoptotic activity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.406-406
• /
• 2011

최근 결정질 실리콘 태양전지 분야에서는 태양전지의 Voc와 Isc의 증가를 통한 효율 향상을 목적으로 후면 passivation 박막에 대한 연구가 활발하게 진행되고 있다. Local-Back Contact Cell은 최적화된 후면 passivation 박막을 이용한 태양전지 제조방법이다. 본 연구에서는 고효율의 LBC 태양전지 개발을 위해 Rapid Thermal Oxide(RTO)를 이용한 후면 passivation 박막에 screen printing을 이용한 point contact 구조의 LBC 태양전지를 제작하고 그 특성을 분석하였다. 본 연구에 사용된 RTO 박막은 O2와 N2, 2L/min의 조건에서 $850^{\circ}C$에서 3분 동안 열처리하여 성장시켰다. 이렇게 성장된 박막은 3nm의 두께로 형성되어 passivation 효과를 나타내었으며, carrier lifetime 측정 결과 37.8us의 값을 나타냈다. 전면 ARC형성을 위해 RTO 박막 위에 PECVD를 이용하여 SiNx passivation 처리를 하였고, 그 결과 carrier lifetime은 49.1us까지 향상하였다. 후면의 전극 형성을 위해 screen printing 방법으로 Al point contact을 형성하여 local 한 BSF를 형성 시켰으며, 이후 후면 전극 연결을 위한 방법으로 300nm의 두께로 full Al evaporation 공정을 진행 하였다. 결과적으로 RTO 후면 passivation 박막에 Al point contact 형성을 통해 제작된 태양전지는, Suns-Voc 579mV, FF 82.3%, 16.7%의 효율을 달성하였다.