• Journal of Periodontal and Implant Science
• /
• v.31 no.3
• /
• pp.531-542
• /
• 2001

Periodontal debridement is most important procedure in periodontal treatment, because periodontal disease is the biofilm infection. The use of ultrasonic instrument has many clinical advantages compared to classical hand instrument. The introduction of newly developed ultrasonic scaler tips made the use of ultrasonic scaler popular. However the study of tooth substance removal according to the working parameters of ultrasonic scaler with newly developed tips is not sufficient. The purpose of this study is to evaluate the effects of working parameters of piezoelectric ultrasonic scaler with curette tip on casting gold removal. The working parameters was standardized by the sledge device which controls lateral force(0.5 N, 1.0 N, 2.0 N) and power setting was adjusted 2, 4, 8 in P mode and S mode and instrumentation time was 5 seconds. The defect depth and width were measured with profile meter and defect surface was examined by SME. The depth of defect was significantly large in S mode( $39.58{\pm}19.35{\mu}m$) compared to P mode( $8.37{\pm}6.98{\mu}m$). There was significant decrease of depth of defect between 1.0N($32.87{\pm}27.18{\mu}m$) and 2.0N( $14.86{\pm}15.04{\mu}m$). The area of defect was also significantly large in S mode($4482.42{\pm}3551.71{\mu}m^2$) compared to P mode( $922.06{\pm}960.32{\mu}m^2$). There was significant decrease of area of defect between 1.0N($3889.12{\pm}3936.00{\mu}m$) and 2.0N( $974.66{\pm}986.01{\mu}m$). The change of mode did not effect on the width of the defect. The change of power setting did not effect on the depth, width, and area of defect. In spite of limitation of this study it could be concluded that the use of piezoelectric ultrasonic scaler with curette tip on S mode could make significant tooth substance loss.

• Journal of Ecology and Environment
• /
• v.40 no.1
• /
• pp.24-33
• /
• 2016

Background: Previous numerous studies on watershed scale demonstrated that the constructions of upper dams may influence the below dams due to modifications of flow regime and nutrient inputs. Little is known about how the dam constructions influence the downstream lakes or reservoirs in the regional scale. This study demonstrates how the construction of upper dam (i.e., Yongdam Dam) influences nutrient regime, trophic relations, and empirical models in Daechung Reservoir (DR). Yongdam Dam was constructed at the upstream region of DR in year 2000. Results: The analysis of hydrological variables showed that inflow and discharge in the DR were largely reduced after the year 2000. The construction of upper dam construction also resulted in increases of water temperature, pH and conductivity (as an indicator of ionic content) in the DR. Empirical models of TP-CHL and N:P ratio-CHL suggested that stronger responses of CHL to the phosphorus were evident after the upper dam construction, indicating that algal production at a unit phosphorus increased after the upper dam construction. Mann-Kendall tests on the relations of N:P ratios to TN showed weak or no relations ($t_{au}=-0.143$, z = -0.371, p = 0.7105) before the dam construction, while the relation of N:P ratios to TP showed strong in the periods of before- ($t_{au}=-0714$, z = -2.351, p = 0.0187) and after the construction ($t_{au}=-0.868$, z = -4.270, p = 0.0000). This outcome indicates that TP is key determinant on N:P ratios in the reservoir. Scatter Plots on Trophic State Index Deviations (TSIDs) of "TSI(SD) - TSI(CHL)" against "TSI(TP) - TSI(CHL)" showed that the dominance of clay turbidity or light limitation was evident before the upper dam construction [TSI(TP) - TSI(CHL) > 0 and TSI(SD) - TSI(CHL) > 0] and phosphorus limitation became stronger after the dam construction [(TSI(TP) - TSI(CHL) < 0 and TSI(SD) - TSI(CHL) > 0]. Conclusions: Overall, our analysis suggests that the upper dam construction modified the response of trophic components (phytoplankton) to the nutrients or nutrient ratios through the alteration of flow regime, resulting in modifications of ecological functions and trophic relations in the low trophic levels.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.2
• /
• pp.68-76
• /
• 1989

The effect of characteristic of mixture sowing combination on the development of botanical composition was conducted for 12 years on the meadow experiment. The results of this study were summarized as follows. 1. Festuca pratensis lost the expected position of a dominant species. Its vegetation ratio decreased gradually until the last survey year. 2. Arrhenatherum elatius, known as a typical 2-cutting grasss, developed to a dominant species only in the 3- cutting plot without limitation. 3. Alopecurus pratensis, whose feeding value diminishes rapidly, developed to a dominant species regardless of N-fertilization under the condition of 3-cutting, even though the same small amount of seeding was introduced as usual. 4. Trisetum flavescens which causes calcinose exceeded the 40% of vegetation ratio which was the approved rate for feeding at the high N-level (2OOKgIha). 5. Among the introduced, the species showed the significance in quantity were Lotus corniculafus solely in the 2-cutting plot, and Trifolium repens solely in the 3-cutting plot. In the 3-cutting plot legume yet remained under N-fertilization. 6. The appropriate ratio of vegetation for the subordinate species in the mixture sowing combination was easily attained from the least amount of seeding (Gramineae with max. 3Kg/ha, Leguminosae with max. 2kgIha). 7. Into the mixture sowing combination, infiltrated unintroduced species marked more noticeably in the 2- cutting plot than in the 3-cutting plot.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.73-76
• /
• 2003

SF$_{6}$ (Sulfur Hexafluoride) is a gaseous compound whose use is being greatly increased recently. The compound has a negligible background concentration from natural sources and is stable in most of groundwater environments. Therefore, SF$_{6}$ has potential for a dating tool for young groundwater. It has many advantages over chlorofluorocarbons (CFCs) for groundwater investigation that sampling procedure is much simpler than CFCs and its growth is continued up to at least near future in the atmosphere. However, solubility of SF$^{6}$ is so low that excess air causes large uncertainties in recharge date of groundwater. To compensate the limitation, $N_2$/Ar method can be employed to estimate excess air content. A groundwater study is currently carrying out in Jeju Island using SF$_{6}$ as an environmental tracer, Well waters and spring waters were sampled for SF$_{6}$ and $N_2$/Ar. To establish SF$_{6}$ input history in the study area, air sampling is being conducted in the area near the center of the island on a monthly and weekly basis. Based on the present data, the level of SF$_{6}$ concentration in the atmosphere of the Island is corresponding to the trend of the Northern Hemisphere.

• Applied Microscopy
• /
• v.26 no.4
• /
• pp.447-456
• /
• 1996

Fracture surfaces of materials contain useful information ranging from crack path to the mechanism of fracture. Since limitation of electron transparency requires a sample in the form of thin foil for TEM observations, it is impossible to extract such information directly from the fracture surfaces. In this study, the method of surface replication from the ceramic fracture surface is employed to characterize the process of crack propagation in ceramic matrix composites using TEM analysis. The surface replica from the fracture surface in ceramic materials provides detailed surface morphology and more importantly, loosened particles on the fracture surface are collected. Electron diffraction and chemical composition analyses of these particles reveal crack path in the specimen. Furthermore, one can determine the mode of fracture by observing the fracture surface morphology from the image of replica. Two examples are given to illustrate the potential of the surface replication technique. In the first example, apparent toughness increase in $B_{4}C-Al$ composites at high strain rate is investigated by surface replication to elucidate the mechanism of fracture at different strain rates. The polytypes of SiC formed during the sintering of SiC-AlN composite and their effect on the fracture behavior of SiC-AlN composite are analyzed in the second example.

• Smart Structures and Systems
• /
• v.5 no.2
• /
• pp.119-137
• /
• 2009

Smart sensors densely distributed over structures can use their computational and wireless communication capabilities to provide rich information for structural health monitoring (SHM). Though smart sensor technology has seen substantial advances during recent years, implementation of smart sensors on full-scale structures has been limited. Hardware resources available on smart sensors restrict data acquisition capabilities; intrinsic to these wireless systems are packet loss, data synchronization errors, and relatively slow communication speeds. This paper addresses these issues under the hardware limitation by developing corresponding middleware services. The reliable communication service requires only a few acknowledgement packets to compensate for packet loss. The synchronized sensing service employs a resampling approach leaving the need for strict control of sensing timing. The data aggregation service makes use of application specific knowledge and distributed computing to suppress data transfer requirements. These middleware services are implemented on the Imote2 smart sensor platform, and their efficacy demonstrated experimentally.

• Journal of Korean Academy of Nursing
• /
• v.37 no.5
• /
• pp.625-634
• /
• 2007

Purpose: The purpose of this study was to test the reliability and validity of an MIL instrument for adolescents. Method: The research design was a three-phase, methodological study. 1) The original 46 items of the Meaning in Life (MIL) Scale were reviewed and corrected partially by 20 adolescents. 2) The content was validated by an expert panel (n=15) and adolescents (n=5). 3) The instrument was validated by survey (n=468). Finally, 33 items were chosen for the adolescents meaning in life(AMIL) scale. Results: Cronbach's alpha coefficient of the 33 items was .92, confirming the high internal consistency of the instrument. 2) Eight factors were extracted through factor analysis: 'experience of love', 'making efforts for goal', 'awareness of essential being', 'awareness of self limitation', 'feeling of satisfaction', 'relation experience', 'positive thinking', and 'hope'. These factors explained 58.26% of the total variance. Conclusion: AMIL Scale was identified as a tool with a high degree of reliability and validity. The tool can therefore be effectively utilized to assess the degree of meaning of life in caring areas for adolescents. Studies on AMIL of different adolescent subjects are needed for further verification.

• Journal of Korean Society on Water Environment
• /
• v.26 no.3
• /
• pp.377-386
• /
• 2010

Introduction of TBELs into Korean environmental regulatory system for wastewater may require very careful considerations and appropriate modifications of the TBELs applied in US. The Korean regulations for wastewater are based on uniform regulatory criteria for wastewater effluent discharge and are quite different from the individual permit system in US. In addition, the toxic pollutants regulated in Korea are much less than those in US. Therefore, the effects of TBELs application on the pollutants reduction and the economic feasibility should be carefully assessed for different categories of wastewater sources. In this study, the applicability of TBELs for the industrial categories of Korea was discussed. The TBELs were derived for a sample category, the pulp paper paperboard manufacture, based on the previously reported analytical data from 52 facilities of the domestic pulp paper paperboard manufacture in Korea. It was suggested that the BAT effluent limitations were BOD 30 mg/L, $COD_{Mn}$ 40 mg/L, SS 40 mg/L, T-N 30 mg/L and T-P 4 mg/L and that the allowable effluent loads were $0.31{\sim}1.75kgCOD_{Mn}/ton$-products. Due to the limitation of insufficient data, there were difficult to obtain the important factors to derive more systematic and accurate limitation standards for the pollutants such as the 'Long Term Average (LTA)', the 'Product Normalized Discharge Flow (PNDF)', and the 'Variability Factor (VF)'. However, as the first trial of TBELs determination based on the all available analytical data reported, the procedure and the outcome of the study may provide valuable insight on application of TBELs in Korea.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.1
• /
• pp.40-48
• /
• 1998

Linear size expanders have been studied in many fields for the practical use, which make it possible to connect large numbers of device chips in both parallel communication systems and parallel computers. One major limitation on the efficiency of parallel computer designs has been the highly cost of parallel communication between processors and memories. Linear order concentrators can be used to construct theoretically optimal interconnection network schemes. Existing explicitly defined constructions are based on expanders, which have large constant factors, thereby rendering them impractical for reasonable sized networks. For these objectives, we use the more detailed matching points in permutation functions, to find out the bigger expansion constant from an equation, $\mid\Gamma_x\mid\geq[1+d(1-\midX\mid/n)]\midX\mid$. This paper presents an improvement of expansion constant on constructing concentrators using expanders, which realizes the reduction of the size in a superconcentrator by a constant factor. As a result, this paper shows an explicit construction of (n, 5, $1-\sqrt{3/2}$) expander. Thus, superconcentrators with 209n edges can be obtained by applying to the expanders of Gabber and Galil's construction.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.2
• /
• pp.124-133
• /
• 2020

Objectives: Mask fit is a crucial factor in preventing respiratory infections among healthcare workers. The current coronavirus(COVID-19) pandemic calls for the replacement of imported N95 medical masks with domestic N95 versions. In this study, we aimed to determine whether these masks provide proper protection. Methods: Thirty-five participants from three healthcare institutions donned four types of masks and Quantitative Fit Tests(Portacount, USA) were performed. The order of fit test for the four types of masks was randomized, and a three-minute washout period was applied between test times(2 min 29 sec) to reduce potential error stemming from physical exhaustion. Results: There were no significant differences in the Fit Factor for the four types of masks, and there were no gender differences. However, the Fit Factor significantly differed across the three healthcare institutions (p=0.007). With eight of the 35 participants passing, the pass rate with the criteria of 100 or higher was 21%. Conclusions: The mask used in this study was a new domestic N95 medical mask, and the participants were unfamiliar with how to wear it. They reported difficulties with mask fitting. In light of a previous finding that mask fit improved with frequently used masks, wearer preferred masks, or when masks that are regularly worn are used during fit training, the fact that participants were unfamiliar with the mask used in this study is a limitation that should not be overlooked.